CSS validation warnings
Hi list, I keep getting the following CSS validation errors for my "custom.css" file in oXygen V25: * Unknown pseudo-element or pseudo-class “:no-tags” * Negative values are not allowed: -0.5em /(padding)/ * Property “margin-inline-start” doesn't exist : 0 This is annoying because the "Results" window keeps popping up whenever I save a dita file. How can I tell oXygen to ignore these elements/properties/values? I can't find the required settings under "Options > Preferences > CSS Validator". Frank -- *Frank Dissinger* Documentation Manager .................................................................... *CGS Publishing Technologies International GmbH* *Email *frank.dissinger@cgs-oris.com | *Web* www.cgs-oris.com <http://www.cgs-oris.com/> *Address* Kettelerstr. 24 | D-63512 Hainburg | Germany *Phone* +49 6182 9626-27 | *Fax* +49 6182 9626-99 *Commercial register* Offenbach, HRB no. 21495 *Managing directors* Bernd Rückert, Christoph Thommessen https://www.cgs-oris.com/Signatur.png <https://www.cgs-oris.com/signatur>
This is annoying because the "Results" window keeps popping up whenever I save a dita file.
Hi Frank, There are two distinct aspects to this: 1) Installing your framework in Oxygen and editing a DITA topic in the Author mode using your custom framework's CSS. I tested and on my side Oxygen reports no error when opening and editing a DITA topic with your framework. So I cannot reproduce this problem you reported: 2) Opening your "custom.css" in Oxygen and validating it. Here indeed some errors are reported. 2.1)
Unknown pseudo-element or pseudo-class “:no-tags” You can avoid this error by prefixing the custom pseudo class with "-oxy-", something like ":root:-oxy-no-tags".
Also make sure you prefix the pseudo class value also in the oxy_action. 2.2)
“-2em” negative values are not allowed : Such errors are reported by the W3C CSS validator, the CSS is considered invalid according to the CSS standard. We do not have settings to filter out errors reported by the CSS validator.
2.3)
Property “margin-inline-start” doesn't exist : 0 Again this property does not see to be defined in the CSS3 standard and is reported as such by the W3C CSS validator. We do not have a way to inhibit this.
Oxygen's CSS engine used to render DITA topics in the Author mode does not support this "margin-inline-start" property or use it in any way. But some browsers seem to support it. Regards, Radu Radu Coravu Oxygen XML Editor On 1/18/23 11:30, Frank Dissinger wrote:
Hi list,
I keep getting the following CSS validation errors for my "custom.css" file in oXygen V25:
* Unknown pseudo-element or pseudo-class “:no-tags” * Negative values are not allowed: -0.5em /(padding)/ * Property “margin-inline-start” doesn't exist : 0
This is annoying because the "Results" window keeps popping up whenever I save a dita file.
How can I tell oXygen to ignore these elements/properties/values?
I can't find the required settings under "Options > Preferences > CSS Validator".
Frank
--
*Frank Dissinger*
Documentation Manager
....................................................................
*CGS Publishing Technologies International GmbH*
*Email *frank.dissinger@cgs-oris.com | *Web* www.cgs-oris.com <http://www.cgs-oris.com/>
*Address* Kettelerstr. 24 | D-63512 Hainburg | Germany
*Phone* +49 6182 9626-27 | *Fax* +49 6182 9626-99
*Commercial register* Offenbach, HRB no. 21495
*Managing directors* Bernd Rückert, Christoph Thommessen
https://www.cgs-oris.com/Signatur.png <https://www.cgs-oris.com/signatur>
_______________________________________________ oXygen-user mailing list oXygen-user@oxygenxml.com https://www.oxygenxml.com/mailman/listinfo/oxygen-user
Frank, are you using an Oxygen framework for your custom CSS? Best, Kris Kristen James Eberlein Chair, OASIS DITA Technical Committee Owner, Eberlein Consulting LLC kris@eberleinconsulting.com Skype: kriseberlein; voice: +1 (919) 622-1501 From: oXygen-user <oxygen-user-bounces@oxygenxml.com> On Behalf Of Frank Dissinger Sent: Wednesday, January 18, 2023 4:31 AM To: Oxygen User Mailing List <oxygen-user@oxygenxml.com> Subject: [oXygen-user] CSS validation warnings Hi list, I keep getting the following CSS validation errors for my "custom.css" file in oXygen V25: * Unknown pseudo-element or pseudo-class “:no-tags” * Negative values are not allowed: -0.5em (padding) * Property “margin-inline-start” doesn't exist : 0 This is annoying because the "Results" window keeps popping up whenever I save a dita file. How can I tell oXygen to ignore these elements/properties/values? I can't find the required settings under "Options > Preferences > CSS Validator". Frank -- Frank Dissinger Documentation Manager .................................................................... CGS Publishing Technologies International GmbH Email frank.dissinger@cgs-oris.com<mailto:frank.dissinger@cgs-oris.com> | Web www.cgs-oris.com<http://www.cgs-oris.com/> Address Kettelerstr. 24 | D-63512 Hainburg | Germany Phone +49 6182 9626-27 | Fax +49 6182 9626-99 Commercial register Offenbach, HRB no. 21495 Managing directors Bernd Rückert, Christoph Thommessen [https://www.cgs-oris.com/Signatur.png]<https://www.cgs-oris.com/signatur>
Hi Kris and Radu, I refer to (2): Opening "custom.css" in oXygen. /Also make sure you prefix the pseudo class value also in the oxy_action. /--> How do I do this? Negative values do have an effect in oXygen's Author mode and they are essential for me. Hm...??? I'll investigate to see if "margin-inline-start" is really required or can be replaced. I saw that it is used in one of oXygen's CSS files and wanted to reverse a formatting effect produced with this style. Do I use an oXygen framework for my custom.css? Probably... How can I verify this? Regards, Frank ------------------------------------------------------------------------ > Hi Frank, > > > There are two distinct aspects to this: > > > 1) Installing your framework in Oxygen and editing a DITA topic in the > Author mode using your custom framework's CSS. I tested and on my side > Oxygen reports no error when opening and editing a DITA topic with > your framework. So I cannot reproduce this problem you reported: > > >> This is annoying because the "Results" window keeps popping up >> whenever I save a dita file. > 2) *Opening your "custom.css" in Oxygen and validating it*. Here > indeed some errors are reported. > > > 2.1) > > >> Unknown pseudo-element or pseudo-class “:no-tags” > You can avoid this error by prefixing the custom pseudo class with > "-oxy-", something like ":root:-oxy-no-tags". > > *Also make sure you prefix the pseudo class value also in the oxy_action.* > > > 2.2) > > >> *“-2em” negative values are not allowed *: > Such errors are reported by the W3C CSS validator, the CSS is > considered invalid according to the CSS standard. We do not have > settings to filter out errors reported by the CSS validator. > > > 2.3) > > >> Property “*margin-inline-start*” doesn't exist : 0 > Again this property does not see to be defined in the CSS3 standard > and is reported as such by the W3C CSS validator. We do not have a way > to inhibit this. > > Oxygen's CSS engine used to render DITA topics in the Author mode does > not support this "margin-inline-start" property or use it in any way. > But some browsers seem to support it. > > > Regards, > > Radu > > Radu Coravu > Oxygen XML Editor ------------------------------------------------------------------------ Am 18.01.2023 um 11:46 schrieb Kristen James Eberlein: > > *Frank, are you using an Oxygen framework for your custom CSS?* > > Best, > > Kris > > Kristen James Eberlein > Chair, OASIS DITA Technical Committee > Owner, Eberlein Consulting LLC > kris@eberleinconsulting.com > > Skype: kriseberlein; voice: +1 (919) 622-1501 > > *From:* oXygen-user <oxygen-user-bounces@oxygenxml.com> *On Behalf Of > *Frank Dissinger > *Sent:* Wednesday, January 18, 2023 4:31 AM > *To:* Oxygen User Mailing List <oxygen-user@oxygenxml.com> > *Subject:* [oXygen-user] CSS validation warnings > > Hi list, > > I keep getting the following CSS validation errors for my "custom.css" > file in oXygen V25: > > * Unknown pseudo-element or pseudo-class “:no-tags” > * Negative values are not allowed: -0.5em /(padding)/ > * Property “margin-inline-start” doesn't exist : 0 > > This is annoying because the "Results" window keeps popping up > whenever I save a dita file. > > How can I tell oXygen to ignore these elements/properties/values? > > I can't find the required settings under "Options > Preferences > CSS > Validator". > > Frank > -- *Frank Dissinger* Documentation Manager .................................................................... *CGS Publishing Technologies International GmbH* *Email *frank.dissinger@cgs-oris.com | *Web* www.cgs-oris.com <http://www.cgs-oris.com/> *Address* Kettelerstr. 24 | D-63512 Hainburg | Germany *Phone* +49 6182 9626-27 | *Fax* +49 6182 9626-99 *Commercial register* Offenbach, HRB no. 21495 *Managing directors* Bernd Rückert, Christoph Thommessen https://www.cgs-oris.com/Signatur.png <https://www.cgs-oris.com/signatur>
Hi Frank,
Please see some remarks below:
> /Also make sure you prefix the pseudo class value also in the
> oxy_action. /--> How do I do this?
>
Like this:
> :root:before {
> display:block;
> content: oxy_button(action, oxy_action(
> name, 'Tags on/off ...',
> description, 'Toggle Full Tags',
> operation,
> 'ro.sync.ecss.extensions.commons.operations.TogglePseudoClassOperation',
> arg-elementLocation, '.',
> arg-name, '-oxy-no-tags'
> ));
> position: fixed;
> top: 4px;
> left: 160mm;
> }
>
> :root:-oxy-no-tags, :root:-oxy-no-tags * {
> -oxy-display-tags:none;
> }
> Negative values do have an effect in oXygen's Author mode and they are
> essential for me. Hm...???
>
As I said there are two distinct aspects:
- CSS Validation using the W3C CSS validator. Negative margins are
reported as errors by it.
- The CSS engine Oxygen uses to render the XML in the Author page,
engine which supports negative margins.
> I'll investigate to see if "margin-inline-start" is really required or
> can be replaced. I saw that it is used in one of oXygen's CSS files
> and wanted to reverse a formatting effect produced with this style.
>
We use this property in a single place because the DITA CSS are also
used by our Web Author (in-browser editor). So the Oxygen desktop does
not use this property in any way from what I looked but our Oxygen Web
Author product which runs in a web browser uses this property as it uses
common CSSs with the desktop application.
Regards,
Radu
Radu Coravu
Oxygen XML Editor
On 1/18/23 12:56, Frank Dissinger wrote:
>
> Hi Kris and Radu,
>
>
> I refer to (2): Opening "custom.css" in oXygen.
>
> /Also make sure you prefix the pseudo class value also in the
> oxy_action. /--> How do I do this?
>
> Negative values do have an effect in oXygen's Author mode and they are
> essential for me. Hm...???
>
> I'll investigate to see if "margin-inline-start" is really required or
> can be replaced. I saw that it is used in one of oXygen's CSS files
> and wanted to reverse a formatting effect produced with this style.
>
> Do I use an oXygen framework for my custom.css? Probably... How can I
> verify this?
>
>
> Regards,
>
> Frank
>
>
> ------------------------------------------------------------------------
>
>> Hi Frank,
>>
>>
>> There are two distinct aspects to this:
>>
>>
>> 1) Installing your framework in Oxygen and editing a DITA topic in
>> the Author mode using your custom framework's CSS. I tested and on my
>> side Oxygen reports no error when opening and editing a DITA topic
>> with your framework. So I cannot reproduce this problem you reported:
>>
>>
>>> This is annoying because the "Results" window keeps popping up
>>> whenever I save a dita file.
>> 2) *Opening your "custom.css" in Oxygen and validating it*. Here
>> indeed some errors are reported.
>>
>>
>> 2.1)
>>
>>
>>> Unknown pseudo-element or pseudo-class “:no-tags”
>> You can avoid this error by prefixing the custom pseudo class with
>> "-oxy-", something like ":root:-oxy-no-tags".
>>
>> *Also make sure you prefix the pseudo class value also in the
>> oxy_action.*
>>
>>
>> 2.2)
>>
>>
>>> *“-2em” negative values are not allowed *:
>> Such errors are reported by the W3C CSS validator, the CSS is
>> considered invalid according to the CSS standard. We do not have
>> settings to filter out errors reported by the CSS validator.
>>
>>
>> 2.3)
>>
>>
>>> Property “*margin-inline-start*” doesn't exist : 0
>> Again this property does not see to be defined in the CSS3 standard
>> and is reported as such by the W3C CSS validator. We do not have a
>> way to inhibit this.
>>
>> Oxygen's CSS engine used to render DITA topics in the Author mode
>> does not support this "margin-inline-start" property or use it in any
>> way. But some browsers seem to support it.
>>
>>
>> Regards,
>>
>> Radu
>>
>> Radu Coravu
>> Oxygen XML Editor
>
> ------------------------------------------------------------------------
> Am 18.01.2023 um 11:46 schrieb Kristen James Eberlein:
>>
>> *Frank, are you using an Oxygen framework for your custom CSS?*
>>
>> Best,
>>
>> Kris
>>
>> Kristen James Eberlein
>> Chair, OASIS DITA Technical Committee
>> Owner, Eberlein Consulting LLC
>> kris@eberleinconsulting.com
>>
>> Skype: kriseberlein; voice: +1 (919) 622-1501
>>
>> *From:* oXygen-user <oxygen-user-bounces@oxygenxml.com> *On Behalf Of
>> *Frank Dissinger
>> *Sent:* Wednesday, January 18, 2023 4:31 AM
>> *To:* Oxygen User Mailing List <oxygen-user@oxygenxml.com>
>> *Subject:* [oXygen-user] CSS validation warnings
>>
>> Hi list,
>>
>> I keep getting the following CSS validation errors for my
>> "custom.css" file in oXygen V25:
>>
>> * Unknown pseudo-element or pseudo-class “:no-tags”
>> * Negative values are not allowed: -0.5em /(padding)/
>> * Property “margin-inline-start” doesn't exist : 0
>>
>> This is annoying because the "Results" window keeps popping up
>> whenever I save a dita file.
>>
>> How can I tell oXygen to ignore these elements/properties/values?
>>
>> I can't find the required settings under "Options > Preferences > CSS
>> Validator".
>>
>> Frank
>>
> --
>
> *Frank Dissinger*
>
> Documentation Manager
>
> ....................................................................
>
> *CGS Publishing Technologies International GmbH*
>
> *Email *frank.dissinger@cgs-oris.com | *Web* www.cgs-oris.com
> <http://www.cgs-oris.com/>
>
> *Address* Kettelerstr. 24 | D-63512 Hainburg | Germany
>
> *Phone* +49 6182 9626-27 | *Fax* +49 6182 9626-99
>
> *Commercial register* Offenbach, HRB no. 21495
>
> *Managing directors* Bernd Rückert, Christoph Thommessen
>
>
> https://www.cgs-oris.com/Signatur.png <https://www.cgs-oris.com/signatur>
>
> _______________________________________________
> oXygen-user mailing list
> oXygen-user@oxygenxml.com
> https://www.oxygenxml.com/mailman/listinfo/oxygen-user
participants (3)
-
Frank Dissinger -
Kristen James Eberlein -
Oxygen XML Editor Support (Radu Coravu)