Converting DITA-OT plugin from 1.5.4 to 1.6
Would anyone be willing to assist me in converting my plugin from 1.5.4 to 1.6? I followed the instructions here: http://dita-ot.sourceforge.net/1.6.1/readme/dita2pdf-customization.html
From Oxygen, I duplicated the "Run DITA OT Integrator" scenario.
I changed the working directory and build file path to my new directory: C:/PFW/Oxygen XML Editor 14.1/plugins/com.biomerieux.pdf_um/ I ran it: Executing: "c:\pfw\oxygen xml editor 14.1\jre/bin/java" "-Dhttp.proxySet=true" "-Dhttp.proxyHost=10.16.0.59" "-Dhttp.proxyPort=8118" -Xmx256m -classpath "C:\PFW\Oxygen XML Editor 14.1/tools/ant/lib/ant-launcher.jar" "-Dant.home=C:\PFW\Oxygen XML Editor 14.1/tools/ant" org.apache.tools.ant.launch.Launcher -f "C:/PFW/Oxygen XML Editor 14.1/plugins/com.biomerieux.pdf_um/integrator.xml" "-Dstrict=true" Buildfile: C:\PFW\Oxygen XML Editor 14.1\plugins\com.biomerieux.pdf_um\integrator.xml BUILD SUCCESSFUL Total time: 0 seconds The process finished with exit code: 0 Then I'm a bit lost. I thought at that point I could click new under the scenarios and I would see a transformation type that matched. Any guidance on where I've gone wrong? Thanks! Matt AVIS : Ce courrier et ses pieces jointes sont destines a leur seul destinataire et peuvent contenir des informations confidentielles appartenant a bioMerieux. Si vous n'etes pas destinataire, vous etes informe que toute lecture, divulgation, ou reproduction de ce message et des pieces jointes est strictement interdite. Si vous avez recu ce message par erreur merci d'en prevenir l'expediteur et de le detruire, ainsi que ses pieces jointes. NOTICE: This message and attachments are intended only for the use of their addressee and may contain confidential information belonging to bioMerieux. If you are not the intended recipient, you are hereby notified that any reading, dissemination, distribution, or copying of this message, or any attachment, is strictly prohibited. If you have received this message in error, please notify the original sender immediately and delete this message, along with any attachments.
Hi Matt, Oxygen comes with a bundled DITA OT installation located in:
OXYGEN_INSTALL_DIR\frameworks\dita\DITA-OT
There is indeed a plugins folder in Oxygen:
OXYGEN_INSTALL_DIR\plugins
but this folder is for Java-based plugins which provide additional functionality to an Oxygen installation using our Plugins SDK, so this is unrelated to the DITA OT transformations. The DITA OT has also support for plugins, this folder is located in:
OXYGEN_INSTALL_DIR\frameworks\dita\DITA-OT\plugins
So this is the place where you should copy your plugin folder. Then you should run the transformation scenario “Run DITA OT Integrator” directly without modifying it. The transformation scenario will call the DITA OT integrator which will look inside the "plugins" folder and modify stylesheets and build files from the DITA OT to connect the extensions from each found plugin. In order for this to work the folder where Oxygen is installed needs to have full read-write rights, not a problem in your case as you have not installed in the Windows Program Files folder. Regards, Radu Radu Coravu <oXygen/> XML Editor, Schema Editor and XSLT Editor/Debugger http://www.oxygenxml.com On 10/22/2012 7:11 PM, KAATMAN Matthew wrote:
Would anyone be willing to assist me in converting my plugin from 1.5.4 to 1.6?
I followed the instructions here:
http://dita-ot.sourceforge.net/1.6.1/readme/dita2pdf-customization.html
From Oxygen, I duplicated the “Run DITA OT Integrator” scenario.
I changed the working directory and build file path to my new directory:
C:/PFW/Oxygen XML Editor 14.1/plugins/com.biomerieux.pdf_um/
I ran it:
Executing: "c:\pfw\oxygen xml editor 14.1\jre/bin/java" "-Dhttp.proxySet=true" "-Dhttp.proxyHost=10.16.0.59" "-Dhttp.proxyPort=8118" -Xmx256m -classpath "C:\PFW\Oxygen XML Editor 14.1/tools/ant/lib/ant-launcher.jar" "-Dant.home=C:\PFW\Oxygen XML Editor 14.1/tools/ant" org.apache.tools.ant.launch.Launcher -f "C:/PFW/Oxygen XML Editor 14.1/plugins/com.biomerieux.pdf_um/integrator.xml" "-Dstrict=true"
Buildfile: C:\PFW\Oxygen XML Editor 14.1\plugins\com.biomerieux.pdf_um\integrator.xml
BUILD SUCCESSFUL Total time: 0 seconds
The process finished with exit code: 0
Then I’m a bit lost. I thought at that point I could click new under the scenarios and I would see a transformation type that matched. Any guidance on where I’ve gone wrong?
Thanks! Matt
AVIS : Ce courrier et ses pieces jointes sont destines a leur seul destinataire et peuvent contenir des informations confidentielles appartenant a bioMerieux. Si vous n'etes pas destinataire, vous etes informe que toute lecture, divulgation, ou reproduction de ce message et des pieces jointes est strictement interdite. Si vous avez recu ce message par erreur merci d'en prevenir l'expediteur et de le detruire, ainsi que ses pieces jointes. NOTICE: This message and attachments are intended only for the use of their addressee and may contain confidential information belonging to bioMerieux. If you are not the intended recipient, you are hereby notified that any reading, dissemination, distribution, or copying of this message, or any attachment, is strictly prohibited. If you have received this message in error, please notify the original sender immediately and delete this message, along with any attachments.
_______________________________________________ oXygen-user mailing list oXygen-user@oxygenxml.com http://www.oxygenxml.com/mailman/listinfo/oxygen-user
Thanks Radu, I realized my error with the plugin directory shortly after posting. I adjusted the paths and ran the default DITA OT integrator option. Afterwards, I should be able to select new scenario -> DITA-OT transformation And then I should see my new transformation type? If I don't see it, how can I troubleshoot? Would the integrator report errors if there was some problem? I do have full write permissions to the directory where I installed it. Thanks! Matt -----Original Message----- From: oxygen-user-bounces@oxygenxml.com [mailto:oxygen-user-bounces@oxygenxml.com] On Behalf Of Oxygen XML Editor Support Sent: Tuesday, October 23, 2012 3:27 AM To: oxygen-user@oxygenxml.com Subject: Re: [oXygen-user] Converting DITA-OT plugin from 1.5.4 to 1.6 Hi Matt, Oxygen comes with a bundled DITA OT installation located in:
OXYGEN_INSTALL_DIR\frameworks\dita\DITA-OT
There is indeed a plugins folder in Oxygen:
OXYGEN_INSTALL_DIR\plugins
but this folder is for Java-based plugins which provide additional functionality to an Oxygen installation using our Plugins SDK, so this is unrelated to the DITA OT transformations. The DITA OT has also support for plugins, this folder is located in:
OXYGEN_INSTALL_DIR\frameworks\dita\DITA-OT\plugins
So this is the place where you should copy your plugin folder. Then you should run the transformation scenario "Run DITA OT Integrator" directly without modifying it. The transformation scenario will call the DITA OT integrator which will look inside the "plugins" folder and modify stylesheets and build files from the DITA OT to connect the extensions from each found plugin. In order for this to work the folder where Oxygen is installed needs to have full read-write rights, not a problem in your case as you have not installed in the Windows Program Files folder. Regards, Radu Radu Coravu <oXygen/> XML Editor, Schema Editor and XSLT Editor/Debugger http://www.oxygenxml.com On 10/22/2012 7:11 PM, KAATMAN Matthew wrote:
Would anyone be willing to assist me in converting my plugin from 1.5.4 to 1.6?
I followed the instructions here:
http://dita-ot.sourceforge.net/1.6.1/readme/dita2pdf-customization.htm l
From Oxygen, I duplicated the "Run DITA OT Integrator" scenario.
I changed the working directory and build file path to my new directory:
C:/PFW/Oxygen XML Editor 14.1/plugins/com.biomerieux.pdf_um/
I ran it:
Executing: "c:\pfw\oxygen xml editor 14.1\jre/bin/java" "-Dhttp.proxySet=true" "-Dhttp.proxyHost=10.16.0.59" "-Dhttp.proxyPort=8118" -Xmx256m -classpath "C:\PFW\Oxygen XML Editor 14.1/tools/ant/lib/ant-launcher.jar" "-Dant.home=C:\PFW\Oxygen XML Editor 14.1/tools/ant" org.apache.tools.ant.launch.Launcher -f "C:/PFW/Oxygen XML Editor 14.1/plugins/com.biomerieux.pdf_um/integrator.xml" "-Dstrict=true"
Buildfile: C:\PFW\Oxygen XML Editor 14.1\plugins\com.biomerieux.pdf_um\integrator.xml
BUILD SUCCESSFUL Total time: 0 seconds
The process finished with exit code: 0
Then I'm a bit lost. I thought at that point I could click new under the scenarios and I would see a transformation type that matched. Any guidance on where I've gone wrong?
Thanks! Matt
AVIS : Ce courrier et ses pieces jointes sont destines a leur seul destinataire et peuvent contenir des informations confidentielles appartenant a bioMerieux. Si vous n'etes pas destinataire, vous etes informe que toute lecture, divulgation, ou reproduction de ce message et des pieces jointes est strictement interdite. Si vous avez recu ce message par erreur merci d'en prevenir l'expediteur et de le detruire, ainsi que ses pieces jointes. NOTICE: This message and attachments are intended only for the use of their addressee and may contain confidential information belonging to bioMerieux. If you are not the intended recipient, you are hereby notified that any reading, dissemination, distribution, or copying of this message, or any attachment, is strictly prohibited. If you have received this message in error, please notify the original sender immediately and delete this message, along with any attachments.
_______________________________________________ oXygen-user mailing list oXygen-user@oxygenxml.com http://www.oxygenxml.com/mailman/listinfo/oxygen-user
_______________________________________________ oXygen-user mailing list oXygen-user@oxygenxml.com http://www.oxygenxml.com/mailman/listinfo/oxygen-user AVIS : Ce courrier et ses pieces jointes sont destines a leur seul destinataire et peuvent contenir des informations confidentielles appartenant a bioMerieux. Si vous n'etes pas destinataire, vous etes informe que toute lecture, divulgation, ou reproduction de ce message et des pieces jointes est strictement interdite. Si vous avez recu ce message par erreur merci d'en prevenir l'expediteur et de le detruire, ainsi que ses pieces jointes. NOTICE: This message and attachments are intended only for the use of their addressee and may contain confidential information belonging to bioMerieux. If you are not the intended recipient, you are hereby notified that any reading, dissemination, distribution, or copying of this message, or any attachment, is strictly prohibited. If you have received this message in error, please notify the original sender immediately and delete this message, along with any attachments.
Hi Matthew, New transformation types are not visible in my version of oXygen, 13.2. Radu is describing a case where your plugin modifies default processing. I have plugins that create new trans types with new functionality, but don't change the default transformations. I think that is what you are describing. You need to create a new transform based on whatever transform is closest: probably XHTML or PDF, then add a new parameter in the new transformation. The new parameter is "transtype", the value is the name of your new transformation type. Assuming you are modifying XHTML, you would do the following: - click on "DITA Map XHTML" - click on "Duplicate" button - The dialog for editing a transformation will appear - In the top of the dialog box, the "Name" field will say "DITA Map XHTML duplicate" - edit this name as you desire - The "parameters" tab will be open if you started with "XHTML", if you started with "PDF", click on "Parameters" tab - There is no "transtype" parameter - click "New" - Fill in the "Name" field with "transtype" - The value must be the name of your transtype as defined in your plugin - you can add a description if you like. I added " The transtype specifies what processinig is applied, at the highest level." (apparently I misspelled processing) - Hit OK. This exist the "Edit Parameter" dialog - Hit OK to exit the "Edit DITA Scenario" dialog - You are back to the "Configure Transformation Scenario" dialog. Click either "Save and Close" or "Transform Now". Any other action in this dialog will lose your edits and your new scenario. Good luck! Rob -- Rob Echlin, Documentation Systems Architect, Wind River -----Original Message----- From: oxygen-user-bounces@oxygenxml.com [mailto:oxygen-user-bounces@oxygenxml.com] On Behalf Of KAATMAN Matthew Sent: Tuesday, October 23, 2012 11:28 AM To: Oxygen XML Editor Support; oxygen-user@oxygenxml.com Subject: Re: [oXygen-user] Converting DITA-OT plugin from 1.5.4 to 1.6 Thanks Radu, I realized my error with the plugin directory shortly after posting. I adjusted the paths and ran the default DITA OT integrator option. Afterwards, I should be able to select new scenario -> DITA-OT transformation And then I should see my new transformation type? If I don't see it, how can I troubleshoot? Would the integrator report errors if there was some problem? I do have full write permissions to the directory where I installed it. Thanks! Matt -----Original Message----- From: oxygen-user-bounces@oxygenxml.com [mailto:oxygen-user-bounces@oxygenxml.com] On Behalf Of Oxygen XML Editor Support Sent: Tuesday, October 23, 2012 3:27 AM To: oxygen-user@oxygenxml.com Subject: Re: [oXygen-user] Converting DITA-OT plugin from 1.5.4 to 1.6 Hi Matt, Oxygen comes with a bundled DITA OT installation located in:
OXYGEN_INSTALL_DIR\frameworks\dita\DITA-OT
There is indeed a plugins folder in Oxygen:
OXYGEN_INSTALL_DIR\plugins
but this folder is for Java-based plugins which provide additional functionality to an Oxygen installation using our Plugins SDK, so this is unrelated to the DITA OT transformations. The DITA OT has also support for plugins, this folder is located in:
OXYGEN_INSTALL_DIR\frameworks\dita\DITA-OT\plugins
So this is the place where you should copy your plugin folder. Then you should run the transformation scenario "Run DITA OT Integrator" directly without modifying it. The transformation scenario will call the DITA OT integrator which will look inside the "plugins" folder and modify stylesheets and build files from the DITA OT to connect the extensions from each found plugin. In order for this to work the folder where Oxygen is installed needs to have full read-write rights, not a problem in your case as you have not installed in the Windows Program Files folder. Regards, Radu Radu Coravu <oXygen/> XML Editor, Schema Editor and XSLT Editor/Debugger http://www.oxygenxml.com On 10/22/2012 7:11 PM, KAATMAN Matthew wrote:
Would anyone be willing to assist me in converting my plugin from 1.5.4 to 1.6?
I followed the instructions here:
http://dita-ot.sourceforge.net/1.6.1/readme/dita2pdf-customization.htm l
From Oxygen, I duplicated the "Run DITA OT Integrator" scenario.
I changed the working directory and build file path to my new directory:
C:/PFW/Oxygen XML Editor 14.1/plugins/com.biomerieux.pdf_um/
I ran it:
Executing: "c:\pfw\oxygen xml editor 14.1\jre/bin/java" "-Dhttp.proxySet=true" "-Dhttp.proxyHost=10.16.0.59" "-Dhttp.proxyPort=8118" -Xmx256m -classpath "C:\PFW\Oxygen XML Editor 14.1/tools/ant/lib/ant-launcher.jar" "-Dant.home=C:\PFW\Oxygen XML Editor 14.1/tools/ant" org.apache.tools.ant.launch.Launcher -f "C:/PFW/Oxygen XML Editor 14.1/plugins/com.biomerieux.pdf_um/integrator.xml" "-Dstrict=true"
Buildfile: C:\PFW\Oxygen XML Editor 14.1\plugins\com.biomerieux.pdf_um\integrator.xml
BUILD SUCCESSFUL Total time: 0 seconds
The process finished with exit code: 0
Then I'm a bit lost. I thought at that point I could click new under the scenarios and I would see a transformation type that matched. Any guidance on where I've gone wrong?
Thanks! Matt
AVIS : Ce courrier et ses pieces jointes sont destines a leur seul destinataire et peuvent contenir des informations confidentielles appartenant a bioMerieux. Si vous n'etes pas destinataire, vous etes informe que toute lecture, divulgation, ou reproduction de ce message et des pieces jointes est strictement interdite. Si vous avez recu ce message par erreur merci d'en prevenir l'expediteur et de le detruire, ainsi que ses pieces jointes. NOTICE: This message and attachments are intended only for the use of their addressee and may contain confidential information belonging to bioMerieux. If you are not the intended recipient, you are hereby notified that any reading, dissemination, distribution, or copying of this message, or any attachment, is strictly prohibited. If you have received this message in error, please notify the original sender immediately and delete this message, along with any attachments.
_______________________________________________ oXygen-user mailing list oXygen-user@oxygenxml.com http://www.oxygenxml.com/mailman/listinfo/oxygen-user
_______________________________________________ oXygen-user mailing list oXygen-user@oxygenxml.com http://www.oxygenxml.com/mailman/listinfo/oxygen-user AVIS : Ce courrier et ses pieces jointes sont destines a leur seul destinataire et peuvent contenir des informations confidentielles appartenant a bioMerieux. Si vous n'etes pas destinataire, vous etes informe que toute lecture, divulgation, ou reproduction de ce message et des pieces jointes est strictement interdite. Si vous avez recu ce message par erreur merci d'en prevenir l'expediteur et de le detruire, ainsi que ses pieces jointes. NOTICE: This message and attachments are intended only for the use of their addressee and may contain confidential information belonging to bioMerieux. If you are not the intended recipient, you are hereby notified that any reading, dissemination, distribution, or copying of this message, or any attachment, is strictly prohibited. If you have received this message in error, please notify the original sender immediately and delete this message, along with any attachments. _______________________________________________ oXygen-user mailing list oXygen-user@oxygenxml.com http://www.oxygenxml.com/mailman/listinfo/oxygen-user
Hey Rob, Thanks for the clarification. I'm still a bit confused though. I think it may be my terminology. In Oxygen 13.x I had a 1.5.4 PDF customization I specified in the customization.dir parameter. In Oxygen 14.1 they've switched to OT 1.6.1 which abandons the demo directory and I thought customizations were now called plugins. Ultimately, I'm just trying to get my styles working for PDF in Oxygen 14.1/OT 1.6.1. Am I following the right process? Thanks for shedding light on this. I think I'm closer to understanding. Matt -----Original Message----- From: Echlin, Robert [mailto:Robert.Echlin@windriver.com] Sent: Tuesday, October 23, 2012 11:07 AM To: KAATMAN Matthew; Oxygen XML Editor Support; oxygen-user@oxygenxml.com Subject: RE: [oXygen-user] Converting DITA-OT plugin from 1.5.4 to 1.6 Hi Matthew, New transformation types are not visible in my version of oXygen, 13.2. Radu is describing a case where your plugin modifies default processing. I have plugins that create new trans types with new functionality, but don't change the default transformations. I think that is what you are describing. You need to create a new transform based on whatever transform is closest: probably XHTML or PDF, then add a new parameter in the new transformation. The new parameter is "transtype", the value is the name of your new transformation type. Assuming you are modifying XHTML, you would do the following: - click on "DITA Map XHTML" - click on "Duplicate" button - The dialog for editing a transformation will appear - In the top of the dialog box, the "Name" field will say "DITA Map XHTML duplicate" - edit this name as you desire - The "parameters" tab will be open if you started with "XHTML", if you started with "PDF", click on "Parameters" tab - There is no "transtype" parameter - click "New" - Fill in the "Name" field with "transtype" - The value must be the name of your transtype as defined in your plugin - you can add a description if you like. I added " The transtype specifies what processinig is applied, at the highest level." (apparently I misspelled processing) - Hit OK. This exist the "Edit Parameter" dialog - Hit OK to exit the "Edit DITA Scenario" dialog - You are back to the "Configure Transformation Scenario" dialog. Click either "Save and Close" or "Transform Now". Any other action in this dialog will lose your edits and your new scenario. Good luck! Rob -- Rob Echlin, Documentation Systems Architect, Wind River -----Original Message----- From: oxygen-user-bounces@oxygenxml.com [mailto:oxygen-user-bounces@oxygenxml.com] On Behalf Of KAATMAN Matthew Sent: Tuesday, October 23, 2012 11:28 AM To: Oxygen XML Editor Support; oxygen-user@oxygenxml.com Subject: Re: [oXygen-user] Converting DITA-OT plugin from 1.5.4 to 1.6 Thanks Radu, I realized my error with the plugin directory shortly after posting. I adjusted the paths and ran the default DITA OT integrator option. Afterwards, I should be able to select new scenario -> DITA-OT transformation And then I should see my new transformation type? If I don't see it, how can I troubleshoot? Would the integrator report errors if there was some problem? I do have full write permissions to the directory where I installed it. Thanks! Matt -----Original Message----- From: oxygen-user-bounces@oxygenxml.com [mailto:oxygen-user-bounces@oxygenxml.com] On Behalf Of Oxygen XML Editor Support Sent: Tuesday, October 23, 2012 3:27 AM To: oxygen-user@oxygenxml.com Subject: Re: [oXygen-user] Converting DITA-OT plugin from 1.5.4 to 1.6 Hi Matt, Oxygen comes with a bundled DITA OT installation located in:
OXYGEN_INSTALL_DIR\frameworks\dita\DITA-OT
There is indeed a plugins folder in Oxygen:
OXYGEN_INSTALL_DIR\plugins
but this folder is for Java-based plugins which provide additional functionality to an Oxygen installation using our Plugins SDK, so this is unrelated to the DITA OT transformations. The DITA OT has also support for plugins, this folder is located in:
OXYGEN_INSTALL_DIR\frameworks\dita\DITA-OT\plugins
So this is the place where you should copy your plugin folder. Then you should run the transformation scenario "Run DITA OT Integrator" directly without modifying it. The transformation scenario will call the DITA OT integrator which will look inside the "plugins" folder and modify stylesheets and build files from the DITA OT to connect the extensions from each found plugin. In order for this to work the folder where Oxygen is installed needs to have full read-write rights, not a problem in your case as you have not installed in the Windows Program Files folder. Regards, Radu Radu Coravu <oXygen/> XML Editor, Schema Editor and XSLT Editor/Debugger http://www.oxygenxml.com On 10/22/2012 7:11 PM, KAATMAN Matthew wrote:
Would anyone be willing to assist me in converting my plugin from 1.5.4 to 1.6?
I followed the instructions here:
http://dita-ot.sourceforge.net/1.6.1/readme/dita2pdf-customization.htm l
From Oxygen, I duplicated the "Run DITA OT Integrator" scenario.
I changed the working directory and build file path to my new directory:
C:/PFW/Oxygen XML Editor 14.1/plugins/com.biomerieux.pdf_um/
I ran it:
Executing: "c:\pfw\oxygen xml editor 14.1\jre/bin/java" "-Dhttp.proxySet=true" "-Dhttp.proxyHost=10.16.0.59" "-Dhttp.proxyPort=8118" -Xmx256m -classpath "C:\PFW\Oxygen XML Editor 14.1/tools/ant/lib/ant-launcher.jar" "-Dant.home=C:\PFW\Oxygen XML Editor 14.1/tools/ant" org.apache.tools.ant.launch.Launcher -f "C:/PFW/Oxygen XML Editor 14.1/plugins/com.biomerieux.pdf_um/integrator.xml" "-Dstrict=true"
Buildfile: C:\PFW\Oxygen XML Editor 14.1\plugins\com.biomerieux.pdf_um\integrator.xml
BUILD SUCCESSFUL Total time: 0 seconds
The process finished with exit code: 0
Then I'm a bit lost. I thought at that point I could click new under the scenarios and I would see a transformation type that matched. Any guidance on where I've gone wrong?
Thanks! Matt
AVIS : Ce courrier et ses pieces jointes sont destines a leur seul destinataire et peuvent contenir des informations confidentielles appartenant a bioMerieux. Si vous n'etes pas destinataire, vous etes informe que toute lecture, divulgation, ou reproduction de ce message et des pieces jointes est strictement interdite. Si vous avez recu ce message par erreur merci d'en prevenir l'expediteur et de le detruire, ainsi que ses pieces jointes. NOTICE: This message and attachments are intended only for the use of their addressee and may contain confidential information belonging to bioMerieux. If you are not the intended recipient, you are hereby notified that any reading, dissemination, distribution, or copying of this message, or any attachment, is strictly prohibited. If you have received this message in error, please notify the original sender immediately and delete this message, along with any attachments.
_______________________________________________ oXygen-user mailing list oXygen-user@oxygenxml.com http://www.oxygenxml.com/mailman/listinfo/oxygen-user
_______________________________________________ oXygen-user mailing list oXygen-user@oxygenxml.com http://www.oxygenxml.com/mailman/listinfo/oxygen-user AVIS : Ce courrier et ses pieces jointes sont destines a leur seul destinataire et peuvent contenir des informations confidentielles appartenant a bioMerieux. Si vous n'etes pas destinataire, vous etes informe que toute lecture, divulgation, ou reproduction de ce message et des pieces jointes est strictement interdite. Si vous avez recu ce message par erreur merci d'en prevenir l'expediteur et de le detruire, ainsi que ses pieces jointes. NOTICE: This message and attachments are intended only for the use of their addressee and may contain confidential information belonging to bioMerieux. If you are not the intended recipient, you are hereby notified that any reading, dissemination, distribution, or copying of this message, or any attachment, is strictly prohibited. If you have received this message in error, please notify the original sender immediately and delete this message, along with any attachments. _______________________________________________ oXygen-user mailing list oXygen-user@oxygenxml.com http://www.oxygenxml.com/mailman/listinfo/oxygen-user AVIS : Ce courrier et ses pieces jointes sont destines a leur seul destinataire et peuvent contenir des informations confidentielles appartenant a bioMerieux. Si vous n'etes pas destinataire, vous etes informe que toute lecture, divulgation, ou reproduction de ce message et des pieces jointes est strictement interdite. Si vous avez recu ce message par erreur merci d'en prevenir l'expediteur et de le detruire, ainsi que ses pieces jointes. NOTICE: This message and attachments are intended only for the use of their addressee and may contain confidential information belonging to bioMerieux. If you are not the intended recipient, you are hereby notified that any reading, dissemination, distribution, or copying of this message, or any attachment, is strictly prohibited. If you have received this message in error, please notify the original sender immediately and delete this message, along with any attachments.
For PDF, your customizations *may* be packaged as plugins or you can simply put them in the plugins/ directory of the base PDF plugin. For 1.6 the PDF plugin has been moved from the demo/ directory to the plugins/ directory, so you need to adjust your customizations to reflect that new location. If your customizations are just customizations, then it should be simply a matter of moving them to the corresponding place under plugins/org.dita.pdf2. If you created a Toolkit plugin with your customizations or created your own transformation type that extends the base PDF2 transformation type, then you'd need to update any references to the old demo directory. Cheers, E. On 10/23/12 11:38 AM, "KAATMAN Matthew" <matthew.kaatman@biomerieux.com> wrote:
Hey Rob,
Thanks for the clarification. I'm still a bit confused though. I think it may be my terminology.
In Oxygen 13.x I had a 1.5.4 PDF customization I specified in the customization.dir parameter.
In Oxygen 14.1 they've switched to OT 1.6.1 which abandons the demo directory and I thought customizations were now called plugins.
Ultimately, I'm just trying to get my styles working for PDF in Oxygen 14.1/OT 1.6.1.
Am I following the right process?
Thanks for shedding light on this. I think I'm closer to understanding.
Matt
-----Original Message----- From: Echlin, Robert [mailto:Robert.Echlin@windriver.com] Sent: Tuesday, October 23, 2012 11:07 AM To: KAATMAN Matthew; Oxygen XML Editor Support; oxygen-user@oxygenxml.com Subject: RE: [oXygen-user] Converting DITA-OT plugin from 1.5.4 to 1.6
Hi Matthew, New transformation types are not visible in my version of oXygen, 13.2.
Radu is describing a case where your plugin modifies default processing. I have plugins that create new trans types with new functionality, but don't change the default transformations. I think that is what you are describing.
You need to create a new transform based on whatever transform is closest: probably XHTML or PDF, then add a new parameter in the new transformation. The new parameter is "transtype", the value is the name of your new transformation type.
Assuming you are modifying XHTML, you would do the following: - click on "DITA Map XHTML" - click on "Duplicate" button - The dialog for editing a transformation will appear - In the top of the dialog box, the "Name" field will say "DITA Map XHTML duplicate" - edit this name as you desire - The "parameters" tab will be open if you started with "XHTML", if you started with "PDF", click on "Parameters" tab - There is no "transtype" parameter - click "New" - Fill in the "Name" field with "transtype" - The value must be the name of your transtype as defined in your plugin - you can add a description if you like. I added " The transtype specifies what processinig is applied, at the highest level." (apparently I misspelled processing) - Hit OK. This exist the "Edit Parameter" dialog - Hit OK to exit the "Edit DITA Scenario" dialog - You are back to the "Configure Transformation Scenario" dialog. Click either "Save and Close" or "Transform Now". Any other action in this dialog will lose your edits and your new scenario.
Good luck! Rob -- Rob Echlin, Documentation Systems Architect, Wind River
-----Original Message----- From: oxygen-user-bounces@oxygenxml.com [mailto:oxygen-user-bounces@oxygenxml.com] On Behalf Of KAATMAN Matthew Sent: Tuesday, October 23, 2012 11:28 AM To: Oxygen XML Editor Support; oxygen-user@oxygenxml.com Subject: Re: [oXygen-user] Converting DITA-OT plugin from 1.5.4 to 1.6
Thanks Radu,
I realized my error with the plugin directory shortly after posting.
I adjusted the paths and ran the default DITA OT integrator option. Afterwards, I should be able to select new scenario -> DITA-OT transformation And then I should see my new transformation type?
If I don't see it, how can I troubleshoot? Would the integrator report errors if there was some problem?
I do have full write permissions to the directory where I installed it.
Thanks! Matt
-----Original Message----- From: oxygen-user-bounces@oxygenxml.com [mailto:oxygen-user-bounces@oxygenxml.com] On Behalf Of Oxygen XML Editor Support Sent: Tuesday, October 23, 2012 3:27 AM To: oxygen-user@oxygenxml.com Subject: Re: [oXygen-user] Converting DITA-OT plugin from 1.5.4 to 1.6
Hi Matt,
Oxygen comes with a bundled DITA OT installation located in:
OXYGEN_INSTALL_DIR\frameworks\dita\DITA-OT
There is indeed a plugins folder in Oxygen:
OXYGEN_INSTALL_DIR\plugins
but this folder is for Java-based plugins which provide additional functionality to an Oxygen installation using our Plugins SDK, so this is unrelated to the DITA OT transformations.
The DITA OT has also support for plugins, this folder is located in:
OXYGEN_INSTALL_DIR\frameworks\dita\DITA-OT\plugins
So this is the place where you should copy your plugin folder. Then you should run the transformation scenario "Run DITA OT Integrator" directly without modifying it. The transformation scenario will call the DITA OT integrator which will look inside the "plugins" folder and modify stylesheets and build files from the DITA OT to connect the extensions from each found plugin. In order for this to work the folder where Oxygen is installed needs to have full read-write rights, not a problem in your case as you have not installed in the Windows Program Files folder.
Regards, Radu
Radu Coravu <oXygen/> XML Editor, Schema Editor and XSLT Editor/Debugger http://www.oxygenxml.com
On 10/22/2012 7:11 PM, KAATMAN Matthew wrote:
Would anyone be willing to assist me in converting my plugin from 1.5.4 to 1.6?
I followed the instructions here:
http://dita-ot.sourceforge.net/1.6.1/readme/dita2pdf-customization.htm l
From Oxygen, I duplicated the "Run DITA OT Integrator" scenario.
I changed the working directory and build file path to my new directory:
C:/PFW/Oxygen XML Editor 14.1/plugins/com.biomerieux.pdf_um/
I ran it:
Executing: "c:\pfw\oxygen xml editor 14.1\jre/bin/java" "-Dhttp.proxySet=true" "-Dhttp.proxyHost=10.16.0.59" "-Dhttp.proxyPort=8118" -Xmx256m -classpath "C:\PFW\Oxygen XML Editor 14.1/tools/ant/lib/ant-launcher.jar" "-Dant.home=C:\PFW\Oxygen XML Editor 14.1/tools/ant" org.apache.tools.ant.launch.Launcher -f "C:/PFW/Oxygen XML Editor 14.1/plugins/com.biomerieux.pdf_um/integrator.xml" "-Dstrict=true"
Buildfile: C:\PFW\Oxygen XML Editor 14.1\plugins\com.biomerieux.pdf_um\integrator.xml
BUILD SUCCESSFUL Total time: 0 seconds
The process finished with exit code: 0
Then I'm a bit lost. I thought at that point I could click new under the scenarios and I would see a transformation type that matched. Any guidance on where I've gone wrong?
Thanks! Matt
AVIS : Ce courrier et ses pieces jointes sont destines a leur seul destinataire et peuvent contenir des informations confidentielles appartenant a bioMerieux. Si vous n'etes pas destinataire, vous etes informe que toute lecture, divulgation, ou reproduction de ce message et des pieces jointes est strictement interdite. Si vous avez recu ce message par erreur merci d'en prevenir l'expediteur et de le detruire, ainsi que ses pieces jointes. NOTICE: This message and attachments are intended only for the use of their addressee and may contain confidential information belonging to bioMerieux. If you are not the intended recipient, you are hereby notified that any reading, dissemination, distribution, or copying of this message, or any attachment, is strictly prohibited. If you have received this message in error, please notify the original sender immediately and delete this message, along with any attachments.
_______________________________________________ oXygen-user mailing list oXygen-user@oxygenxml.com http://www.oxygenxml.com/mailman/listinfo/oxygen-user
_______________________________________________ oXygen-user mailing list oXygen-user@oxygenxml.com http://www.oxygenxml.com/mailman/listinfo/oxygen-user
AVIS : Ce courrier et ses pieces jointes sont destines a leur seul destinataire et peuvent contenir des informations confidentielles appartenant a bioMerieux. Si vous n'etes pas destinataire, vous etes informe que toute lecture, divulgation, ou reproduction de ce message et des pieces jointes est strictement interdite. Si vous avez recu ce message par erreur merci d'en prevenir l'expediteur et de le detruire, ainsi que ses pieces jointes. NOTICE: This message and attachments are intended only for the use of their addressee and may contain confidential information belonging to bioMerieux. If you are not the intended recipient, you are hereby notified that any reading, dissemination, distribution, or copying of this message, or any attachment, is strictly prohibited. If you have received this message in error, please notify the original sender immediately and delete this message, along with any attachments.
_______________________________________________ oXygen-user mailing list oXygen-user@oxygenxml.com http://www.oxygenxml.com/mailman/listinfo/oxygen-user
AVIS : Ce courrier et ses pieces jointes sont destines a leur seul destinataire et peuvent contenir des informations confidentielles appartenant a bioMerieux. Si vous n'etes pas destinataire, vous etes informe que toute lecture, divulgation, ou reproduction de ce message et des pieces jointes est strictement interdite. Si vous avez recu ce message par erreur merci d'en prevenir l'expediteur et de le detruire, ainsi que ses pieces jointes. NOTICE: This message and attachments are intended only for the use of their addressee and may contain confidential information belonging to bioMerieux. If you are not the intended recipient, you are hereby notified that any reading, dissemination, distribution, or copying of this message, or any attachment, is strictly prohibited. If you have received this message in error, please notify the original sender immediately and delete this message, along with any attachments.
_______________________________________________ oXygen-user mailing list oXygen-user@oxygenxml.com http://www.oxygenxml.com/mailman/listinfo/oxygen-user
-- Eliot Kimber Senior Solutions Architect, RSI Content Solutions "Bringing Strategy, Content, and Technology Together" Main: 512.554.9368 www.rsicms.com www.rsuitecms.com Book: DITA For Practitioners, from XML Press, http://xmlpress.net/publications/dita/practitioners-1/
Thanks Eliot, I've nuked my plugin and re-run the Integrator. I've now tried to place my customization in the plugins/org.dita.pdf2/ directory. I duplicated the DITA Map PDF scenario and pointed customization.dir at my new directory. It's choking on layout-masters: [xslt] C:\PFW\Oxygen XML Editor 14.1\frameworks\dita\DITA-OT\plugins\org.dita.pdf2\MattTest\fo\xsl\layout-masters.xsl:42:124: Fatal Error! Variable layout-masters has not been declared I remember seeing a note in the 1.6 release notes about layout-masters.xml being deprecated. Unfortunately, I can't find any notes on what I should be doing to transition away from layout-masters.xml. In my catalog.xml I have my link to my override disabled: <!--uri name="cfg:fo/layout-masters.xml" uri="fo/custom_layout-masters.xml"/--> But I suppose my styles are depending on the old layout-masters that was in cfg. I feel like I'm almost there if you guys have any further thoughts on how I can transition over. Thanks! Matt -----Original Message----- From: Eliot Kimber [mailto:ekimber@rsicms.com] Sent: Tuesday, October 23, 2012 12:50 PM To: KAATMAN Matthew; Echlin, Robert; Oxygen XML Editor Support; Oxygen User Subject: Re: [oXygen-user] Converting DITA-OT plugin from 1.5.4 to 1.6 For PDF, your customizations *may* be packaged as plugins or you can simply put them in the plugins/ directory of the base PDF plugin. For 1.6 the PDF plugin has been moved from the demo/ directory to the plugins/ directory, so you need to adjust your customizations to reflect that new location. If your customizations are just customizations, then it should be simply a matter of moving them to the corresponding place under plugins/org.dita.pdf2. If you created a Toolkit plugin with your customizations or created your own transformation type that extends the base PDF2 transformation type, then you'd need to update any references to the old demo directory. Cheers, E. On 10/23/12 11:38 AM, "KAATMAN Matthew" <matthew.kaatman@biomerieux.com> wrote:
Hey Rob,
Thanks for the clarification. I'm still a bit confused though. I think it may be my terminology.
In Oxygen 13.x I had a 1.5.4 PDF customization I specified in the customization.dir parameter.
In Oxygen 14.1 they've switched to OT 1.6.1 which abandons the demo directory and I thought customizations were now called plugins.
Ultimately, I'm just trying to get my styles working for PDF in Oxygen 14.1/OT 1.6.1.
Am I following the right process?
Thanks for shedding light on this. I think I'm closer to understanding.
Matt
-----Original Message----- From: Echlin, Robert [mailto:Robert.Echlin@windriver.com] Sent: Tuesday, October 23, 2012 11:07 AM To: KAATMAN Matthew; Oxygen XML Editor Support; oxygen-user@oxygenxml.com Subject: RE: [oXygen-user] Converting DITA-OT plugin from 1.5.4 to 1.6
Hi Matthew, New transformation types are not visible in my version of oXygen, 13.2.
Radu is describing a case where your plugin modifies default processing. I have plugins that create new trans types with new functionality, but don't change the default transformations. I think that is what you are describing.
You need to create a new transform based on whatever transform is closest: probably XHTML or PDF, then add a new parameter in the new transformation. The new parameter is "transtype", the value is the name of your new transformation type.
Assuming you are modifying XHTML, you would do the following: - click on "DITA Map XHTML" - click on "Duplicate" button - The dialog for editing a transformation will appear - In the top of the dialog box, the "Name" field will say "DITA Map XHTML duplicate" - edit this name as you desire - The "parameters" tab will be open if you started with "XHTML", if you started with "PDF", click on "Parameters" tab - There is no "transtype" parameter - click "New" - Fill in the "Name" field with "transtype" - The value must be the name of your transtype as defined in your plugin - you can add a description if you like. I added " The transtype specifies what processinig is applied, at the highest level." (apparently I misspelled processing) - Hit OK. This exist the "Edit Parameter" dialog - Hit OK to exit the "Edit DITA Scenario" dialog - You are back to the "Configure Transformation Scenario" dialog. Click either "Save and Close" or "Transform Now". Any other action in this dialog will lose your edits and your new scenario.
Good luck! Rob -- Rob Echlin, Documentation Systems Architect, Wind River
-----Original Message----- From: oxygen-user-bounces@oxygenxml.com [mailto:oxygen-user-bounces@oxygenxml.com] On Behalf Of KAATMAN Matthew Sent: Tuesday, October 23, 2012 11:28 AM To: Oxygen XML Editor Support; oxygen-user@oxygenxml.com Subject: Re: [oXygen-user] Converting DITA-OT plugin from 1.5.4 to 1.6
Thanks Radu,
I realized my error with the plugin directory shortly after posting.
I adjusted the paths and ran the default DITA OT integrator option. Afterwards, I should be able to select new scenario -> DITA-OT transformation And then I should see my new transformation type?
If I don't see it, how can I troubleshoot? Would the integrator report errors if there was some problem?
I do have full write permissions to the directory where I installed it.
Thanks! Matt
-----Original Message----- From: oxygen-user-bounces@oxygenxml.com [mailto:oxygen-user-bounces@oxygenxml.com] On Behalf Of Oxygen XML Editor Support Sent: Tuesday, October 23, 2012 3:27 AM To: oxygen-user@oxygenxml.com Subject: Re: [oXygen-user] Converting DITA-OT plugin from 1.5.4 to 1.6
Hi Matt,
Oxygen comes with a bundled DITA OT installation located in:
OXYGEN_INSTALL_DIR\frameworks\dita\DITA-OT
There is indeed a plugins folder in Oxygen:
OXYGEN_INSTALL_DIR\plugins
but this folder is for Java-based plugins which provide additional functionality to an Oxygen installation using our Plugins SDK, so this is unrelated to the DITA OT transformations.
The DITA OT has also support for plugins, this folder is located in:
OXYGEN_INSTALL_DIR\frameworks\dita\DITA-OT\plugins
So this is the place where you should copy your plugin folder. Then you should run the transformation scenario "Run DITA OT Integrator" directly without modifying it. The transformation scenario will call the DITA OT integrator which will look inside the "plugins" folder and modify stylesheets and build files from the DITA OT to connect the extensions from each found plugin. In order for this to work the folder where Oxygen is installed needs to have full read-write rights, not a problem in your case as you have not installed in the Windows Program Files folder.
Regards, Radu
Radu Coravu <oXygen/> XML Editor, Schema Editor and XSLT Editor/Debugger http://www.oxygenxml.com
On 10/22/2012 7:11 PM, KAATMAN Matthew wrote:
Would anyone be willing to assist me in converting my plugin from 1.5.4 to 1.6?
I followed the instructions here:
http://dita-ot.sourceforge.net/1.6.1/readme/dita2pdf-customization.ht m l
From Oxygen, I duplicated the "Run DITA OT Integrator" scenario.
I changed the working directory and build file path to my new directory:
C:/PFW/Oxygen XML Editor 14.1/plugins/com.biomerieux.pdf_um/
I ran it:
Executing: "c:\pfw\oxygen xml editor 14.1\jre/bin/java" "-Dhttp.proxySet=true" "-Dhttp.proxyHost=10.16.0.59" "-Dhttp.proxyPort=8118" -Xmx256m -classpath "C:\PFW\Oxygen XML Editor 14.1/tools/ant/lib/ant-launcher.jar" "-Dant.home=C:\PFW\Oxygen XML Editor 14.1/tools/ant" org.apache.tools.ant.launch.Launcher -f "C:/PFW/Oxygen XML Editor 14.1/plugins/com.biomerieux.pdf_um/integrator.xml" "-Dstrict=true"
Buildfile: C:\PFW\Oxygen XML Editor 14.1\plugins\com.biomerieux.pdf_um\integrator.xml
BUILD SUCCESSFUL Total time: 0 seconds
The process finished with exit code: 0
Then I'm a bit lost. I thought at that point I could click new under the scenarios and I would see a transformation type that matched. Any guidance on where I've gone wrong?
Thanks! Matt
AVIS : Ce courrier et ses pieces jointes sont destines a leur seul destinataire et peuvent contenir des informations confidentielles appartenant a bioMerieux. Si vous n'etes pas destinataire, vous etes informe que toute lecture, divulgation, ou reproduction de ce message et des pieces jointes est strictement interdite. Si vous avez recu ce message par erreur merci d'en prevenir l'expediteur et de le detruire, ainsi que ses pieces jointes. NOTICE: This message and attachments are intended only for the use of their addressee and may contain confidential information belonging to bioMerieux. If you are not the intended recipient, you are hereby notified that any reading, dissemination, distribution, or copying of this message, or any attachment, is strictly prohibited. If you have received this message in error, please notify the original sender immediately and delete this message, along with any attachments.
_______________________________________________ oXygen-user mailing list oXygen-user@oxygenxml.com http://www.oxygenxml.com/mailman/listinfo/oxygen-user
_______________________________________________ oXygen-user mailing list oXygen-user@oxygenxml.com http://www.oxygenxml.com/mailman/listinfo/oxygen-user
AVIS : Ce courrier et ses pieces jointes sont destines a leur seul destinataire et peuvent contenir des informations confidentielles appartenant a bioMerieux. Si vous n'etes pas destinataire, vous etes informe que toute lecture, divulgation, ou reproduction de ce message et des pieces jointes est strictement interdite. Si vous avez recu ce message par erreur merci d'en prevenir l'expediteur et de le detruire, ainsi que ses pieces jointes. NOTICE: This message and attachments are intended only for the use of their addressee and may contain confidential information belonging to bioMerieux. If you are not the intended recipient, you are hereby notified that any reading, dissemination, distribution, or copying of this message, or any attachment, is strictly prohibited. If you have received this message in error, please notify the original sender immediately and delete this message, along with any attachments.
_______________________________________________ oXygen-user mailing list oXygen-user@oxygenxml.com http://www.oxygenxml.com/mailman/listinfo/oxygen-user
AVIS : Ce courrier et ses pieces jointes sont destines a leur seul destinataire et peuvent contenir des informations confidentielles appartenant a bioMerieux. Si vous n'etes pas destinataire, vous etes informe que toute lecture, divulgation, ou reproduction de ce message et des pieces jointes est strictement interdite. Si vous avez recu ce message par erreur merci d'en prevenir l'expediteur et de le detruire, ainsi que ses pieces jointes. NOTICE: This message and attachments are intended only for the use of their addressee and may contain confidential information belonging to bioMerieux. If you are not the intended recipient, you are hereby notified that any reading, dissemination, distribution, or copying of this message, or any attachment, is strictly prohibited. If you have received this message in error, please notify the original sender immediately and delete this message, along with any attachments.
_______________________________________________ oXygen-user mailing list oXygen-user@oxygenxml.com http://www.oxygenxml.com/mailman/listinfo/oxygen-user
-- Eliot Kimber Senior Solutions Architect, RSI Content Solutions "Bringing Strategy, Content, and Technology Together" Main: 512.554.9368 www.rsicms.com www.rsuitecms.com Book: DITA For Practitioners, from XML Press, http://xmlpress.net/publications/dita/practitioners-1/ AVIS : Ce courrier et ses pieces jointes sont destines a leur seul destinataire et peuvent contenir des informations confidentielles appartenant a bioMerieux. Si vous n'etes pas destinataire, vous etes informe que toute lecture, divulgation, ou reproduction de ce message et des pieces jointes est strictement interdite. Si vous avez recu ce message par erreur merci d'en prevenir l'expediteur et de le detruire, ainsi que ses pieces jointes. NOTICE: This message and attachments are intended only for the use of their addressee and may contain confidential information belonging to bioMerieux. If you are not the intended recipient, you are hereby notified that any reading, dissemination, distribution, or copying of this message, or any attachment, is strictly prohibited. If you have received this message in error, please notify the original sender immediately and delete this message, along with any attachments.
I ran into that same problem yesterday in trying to run my custom D4P PDF2 transform extensions. I did not have time to track down the fix, so you probably need to ask on the DITA User list or dig into the 1.6 release notes. Cheers, E. On 10/23/12 1:07 PM, "KAATMAN Matthew" <matthew.kaatman@biomerieux.com> wrote:
Thanks Eliot,
I've nuked my plugin and re-run the Integrator.
I've now tried to place my customization in the plugins/org.dita.pdf2/ directory.
I duplicated the DITA Map PDF scenario and pointed customization.dir at my new directory.
It's choking on layout-masters: [xslt] C:\PFW\Oxygen XML Editor 14.1\frameworks\dita\DITA-OT\plugins\org.dita.pdf2\MattTest\fo\xsl\layout-mast ers.xsl:42:124: Fatal Error! Variable layout-masters has not been declared
I remember seeing a note in the 1.6 release notes about layout-masters.xml being deprecated.
Unfortunately, I can't find any notes on what I should be doing to transition away from layout-masters.xml.
In my catalog.xml I have my link to my override disabled: <!--uri name="cfg:fo/layout-masters.xml" uri="fo/custom_layout-masters.xml"/-->
But I suppose my styles are depending on the old layout-masters that was in cfg.
I feel like I'm almost there if you guys have any further thoughts on how I can transition over.
Thanks! Matt
-----Original Message----- From: Eliot Kimber [mailto:ekimber@rsicms.com] Sent: Tuesday, October 23, 2012 12:50 PM To: KAATMAN Matthew; Echlin, Robert; Oxygen XML Editor Support; Oxygen User Subject: Re: [oXygen-user] Converting DITA-OT plugin from 1.5.4 to 1.6
For PDF, your customizations *may* be packaged as plugins or you can simply put them in the plugins/ directory of the base PDF plugin.
For 1.6 the PDF plugin has been moved from the demo/ directory to the plugins/ directory, so you need to adjust your customizations to reflect that new location.
If your customizations are just customizations, then it should be simply a matter of moving them to the corresponding place under plugins/org.dita.pdf2.
If you created a Toolkit plugin with your customizations or created your own transformation type that extends the base PDF2 transformation type, then you'd need to update any references to the old demo directory.
Cheers,
E.
On 10/23/12 11:38 AM, "KAATMAN Matthew" <matthew.kaatman@biomerieux.com> wrote:
Hey Rob,
Thanks for the clarification. I'm still a bit confused though. I think it may be my terminology.
In Oxygen 13.x I had a 1.5.4 PDF customization I specified in the customization.dir parameter.
In Oxygen 14.1 they've switched to OT 1.6.1 which abandons the demo directory and I thought customizations were now called plugins.
Ultimately, I'm just trying to get my styles working for PDF in Oxygen 14.1/OT 1.6.1.
Am I following the right process?
Thanks for shedding light on this. I think I'm closer to understanding.
Matt
-----Original Message----- From: Echlin, Robert [mailto:Robert.Echlin@windriver.com] Sent: Tuesday, October 23, 2012 11:07 AM To: KAATMAN Matthew; Oxygen XML Editor Support; oxygen-user@oxygenxml.com Subject: RE: [oXygen-user] Converting DITA-OT plugin from 1.5.4 to 1.6
Hi Matthew, New transformation types are not visible in my version of oXygen, 13.2.
Radu is describing a case where your plugin modifies default processing. I have plugins that create new trans types with new functionality, but don't change the default transformations. I think that is what you are describing.
You need to create a new transform based on whatever transform is closest: probably XHTML or PDF, then add a new parameter in the new transformation. The new parameter is "transtype", the value is the name of your new transformation type.
Assuming you are modifying XHTML, you would do the following: - click on "DITA Map XHTML" - click on "Duplicate" button - The dialog for editing a transformation will appear - In the top of the dialog box, the "Name" field will say "DITA Map XHTML duplicate" - edit this name as you desire - The "parameters" tab will be open if you started with "XHTML", if you started with "PDF", click on "Parameters" tab - There is no "transtype" parameter - click "New" - Fill in the "Name" field with "transtype" - The value must be the name of your transtype as defined in your plugin - you can add a description if you like. I added " The transtype specifies what processinig is applied, at the highest level." (apparently I misspelled processing) - Hit OK. This exist the "Edit Parameter" dialog - Hit OK to exit the "Edit DITA Scenario" dialog - You are back to the "Configure Transformation Scenario" dialog. Click either "Save and Close" or "Transform Now". Any other action in this dialog will lose your edits and your new scenario.
Good luck! Rob -- Rob Echlin, Documentation Systems Architect, Wind River
-----Original Message----- From: oxygen-user-bounces@oxygenxml.com [mailto:oxygen-user-bounces@oxygenxml.com] On Behalf Of KAATMAN Matthew Sent: Tuesday, October 23, 2012 11:28 AM To: Oxygen XML Editor Support; oxygen-user@oxygenxml.com Subject: Re: [oXygen-user] Converting DITA-OT plugin from 1.5.4 to 1.6
Thanks Radu,
I realized my error with the plugin directory shortly after posting.
I adjusted the paths and ran the default DITA OT integrator option. Afterwards, I should be able to select new scenario -> DITA-OT transformation And then I should see my new transformation type?
If I don't see it, how can I troubleshoot? Would the integrator report errors if there was some problem?
I do have full write permissions to the directory where I installed it.
Thanks! Matt
-----Original Message----- From: oxygen-user-bounces@oxygenxml.com [mailto:oxygen-user-bounces@oxygenxml.com] On Behalf Of Oxygen XML Editor Support Sent: Tuesday, October 23, 2012 3:27 AM To: oxygen-user@oxygenxml.com Subject: Re: [oXygen-user] Converting DITA-OT plugin from 1.5.4 to 1.6
Hi Matt,
Oxygen comes with a bundled DITA OT installation located in:
OXYGEN_INSTALL_DIR\frameworks\dita\DITA-OT
There is indeed a plugins folder in Oxygen:
OXYGEN_INSTALL_DIR\plugins
but this folder is for Java-based plugins which provide additional functionality to an Oxygen installation using our Plugins SDK, so this is unrelated to the DITA OT transformations.
The DITA OT has also support for plugins, this folder is located in:
OXYGEN_INSTALL_DIR\frameworks\dita\DITA-OT\plugins
So this is the place where you should copy your plugin folder. Then you should run the transformation scenario "Run DITA OT Integrator" directly without modifying it. The transformation scenario will call the DITA OT integrator which will look inside the "plugins" folder and modify stylesheets and build files from the DITA OT to connect the extensions from each found plugin. In order for this to work the folder where Oxygen is installed needs to have full read-write rights, not a problem in your case as you have not installed in the Windows Program Files folder.
Regards, Radu
Radu Coravu <oXygen/> XML Editor, Schema Editor and XSLT Editor/Debugger http://www.oxygenxml.com
On 10/22/2012 7:11 PM, KAATMAN Matthew wrote:
Would anyone be willing to assist me in converting my plugin from 1.5.4 to 1.6?
I followed the instructions here:
http://dita-ot.sourceforge.net/1.6.1/readme/dita2pdf-customization.ht m l
From Oxygen, I duplicated the "Run DITA OT Integrator" scenario.
I changed the working directory and build file path to my new directory:
C:/PFW/Oxygen XML Editor 14.1/plugins/com.biomerieux.pdf_um/
I ran it:
Executing: "c:\pfw\oxygen xml editor 14.1\jre/bin/java" "-Dhttp.proxySet=true" "-Dhttp.proxyHost=10.16.0.59" "-Dhttp.proxyPort=8118" -Xmx256m -classpath "C:\PFW\Oxygen XML Editor 14.1/tools/ant/lib/ant-launcher.jar" "-Dant.home=C:\PFW\Oxygen XML Editor 14.1/tools/ant" org.apache.tools.ant.launch.Launcher -f "C:/PFW/Oxygen XML Editor 14.1/plugins/com.biomerieux.pdf_um/integrator.xml" "-Dstrict=true"
Buildfile: C:\PFW\Oxygen XML Editor 14.1\plugins\com.biomerieux.pdf_um\integrator.xml
BUILD SUCCESSFUL Total time: 0 seconds
The process finished with exit code: 0
Then I'm a bit lost. I thought at that point I could click new under the scenarios and I would see a transformation type that matched. Any guidance on where I've gone wrong?
Thanks! Matt
AVIS : Ce courrier et ses pieces jointes sont destines a leur seul destinataire et peuvent contenir des informations confidentielles appartenant a bioMerieux. Si vous n'etes pas destinataire, vous etes informe que toute lecture, divulgation, ou reproduction de ce message et des pieces jointes est strictement interdite. Si vous avez recu ce message par erreur merci d'en prevenir l'expediteur et de le detruire, ainsi que ses pieces jointes. NOTICE: This message and attachments are intended only for the use of their addressee and may contain confidential information belonging to bioMerieux. If you are not the intended recipient, you are hereby notified that any reading, dissemination, distribution, or copying of this message, or any attachment, is strictly prohibited. If you have received this message in error, please notify the original sender immediately and delete this message, along with any attachments.
_______________________________________________ oXygen-user mailing list oXygen-user@oxygenxml.com http://www.oxygenxml.com/mailman/listinfo/oxygen-user
_______________________________________________ oXygen-user mailing list oXygen-user@oxygenxml.com http://www.oxygenxml.com/mailman/listinfo/oxygen-user
AVIS : Ce courrier et ses pieces jointes sont destines a leur seul destinataire et peuvent contenir des informations confidentielles appartenant a bioMerieux. Si vous n'etes pas destinataire, vous etes informe que toute lecture, divulgation, ou reproduction de ce message et des pieces jointes est strictement interdite. Si vous avez recu ce message par erreur merci d'en prevenir l'expediteur et de le detruire, ainsi que ses pieces jointes. NOTICE: This message and attachments are intended only for the use of their addressee and may contain confidential information belonging to bioMerieux. If you are not the intended recipient, you are hereby notified that any reading, dissemination, distribution, or copying of this message, or any attachment, is strictly prohibited. If you have received this message in error, please notify the original sender immediately and delete this message, along with any attachments.
_______________________________________________ oXygen-user mailing list oXygen-user@oxygenxml.com http://www.oxygenxml.com/mailman/listinfo/oxygen-user
AVIS : Ce courrier et ses pieces jointes sont destines a leur seul destinataire et peuvent contenir des informations confidentielles appartenant a bioMerieux. Si vous n'etes pas destinataire, vous etes informe que toute lecture, divulgation, ou reproduction de ce message et des pieces jointes est strictement interdite. Si vous avez recu ce message par erreur merci d'en prevenir l'expediteur et de le detruire, ainsi que ses pieces jointes. NOTICE: This message and attachments are intended only for the use of their addressee and may contain confidential information belonging to bioMerieux. If you are not the intended recipient, you are hereby notified that any reading, dissemination, distribution, or copying of this message, or any attachment, is strictly prohibited. If you have received this message in error, please notify the original sender immediately and delete this message, along with any attachments.
_______________________________________________ oXygen-user mailing list oXygen-user@oxygenxml.com http://www.oxygenxml.com/mailman/listinfo/oxygen-user
-- Eliot Kimber Senior Solutions Architect, RSI Content Solutions "Bringing Strategy, Content, and Technology Together" Main: 512.554.9368 www.rsicms.com www.rsuitecms.com Book: DITA For Practitioners, from XML Press, http://xmlpress.net/publications/dita/practitioners-1/
AVIS : Ce courrier et ses pieces jointes sont destines a leur seul destinataire et peuvent contenir des informations confidentielles appartenant a bioMerieux. Si vous n'etes pas destinataire, vous etes informe que toute lecture, divulgation, ou reproduction de ce message et des pieces jointes est strictement interdite. Si vous avez recu ce message par erreur merci d'en prevenir l'expediteur et de le detruire, ainsi que ses pieces jointes. NOTICE: This message and attachments are intended only for the use of their addressee and may contain confidential information belonging to bioMerieux. If you are not the intended recipient, you are hereby notified that any reading, dissemination, distribution, or copying of this message, or any attachment, is strictly prohibited. If you have received this message in error, please notify the original sender immediately and delete this message, along with any attachments.
-- Eliot Kimber Senior Solutions Architect, RSI Content Solutions "Bringing Strategy, Content, and Technology Together" Main: 512.554.9368 www.rsicms.com www.rsuitecms.com Book: DITA For Practitioners, from XML Press, http://xmlpress.net/publications/dita/practitioners-1/
Hi Matt, Just to draw some possible conclusions: From what you said:
In Oxygen 13.x I had a 1.5.4 PDF customization I specified in the customization.dir parameter. In Oxygen 14.1 they've switched to OT 1.6.1 which abandons the demo directory and I thought customizations were now called plugins.
You had a separate customization directory which customized a couple of XSLT templates. It was not necessary for you to copy the customization directory in the bundled DITA OT, just to reference to it using the "customization.dir" parameter as you have previously done. The PDF2 plugin was just moved from the "demo" folder to the "plugins" folder in the new DITA OT 1.6 but the "customization.dir" parameter should work as before. So right now you are getting this problem:
[xslt] C:\PFW\Oxygen XML Editor 14.1\frameworks\dita\DITA-OT\plugins\org.dita.pdf2\MattTest\fo\xsl\layout-mast ers.xsl:42:124: Fatal Error! Variable layout-masters has not been declared
I see that Severin made a suggestion for you on the DITA Users List:
If that does not work, you can also zip your customization directory and send it to the "support@oxygenxml.com" email address. I'll try to reproduce the problem on my side and look at how the stylesheets changed in the DITA OT 1.6 release. Regards, Radu Radu Coravu <oXygen/> XML Editor, Schema Editor and XSLT Editor/Debugger http://www.oxygenxml.com On 10/23/2012 9:07 PM, KAATMAN Matthew wrote:
Thanks Eliot,
I've nuked my plugin and re-run the Integrator.
I've now tried to place my customization in the plugins/org.dita.pdf2/ directory.
I duplicated the DITA Map PDF scenario and pointed customization.dir at my new directory.
It's choking on layout-masters: [xslt] C:\PFW\Oxygen XML Editor 14.1\frameworks\dita\DITA-OT\plugins\org.dita.pdf2\MattTest\fo\xsl\layout-masters.xsl:42:124: Fatal Error! Variable layout-masters has not been declared
I remember seeing a note in the 1.6 release notes about layout-masters.xml being deprecated.
Unfortunately, I can't find any notes on what I should be doing to transition away from layout-masters.xml.
In my catalog.xml I have my link to my override disabled: <!--uri name="cfg:fo/layout-masters.xml" uri="fo/custom_layout-masters.xml"/-->
But I suppose my styles are depending on the old layout-masters that was in cfg.
I feel like I'm almost there if you guys have any further thoughts on how I can transition over.
Thanks! Matt
-----Original Message----- From: Eliot Kimber [mailto:ekimber@rsicms.com] Sent: Tuesday, October 23, 2012 12:50 PM To: KAATMAN Matthew; Echlin, Robert; Oxygen XML Editor Support; Oxygen User Subject: Re: [oXygen-user] Converting DITA-OT plugin from 1.5.4 to 1.6
For PDF, your customizations *may* be packaged as plugins or you can simply put them in the plugins/ directory of the base PDF plugin.
For 1.6 the PDF plugin has been moved from the demo/ directory to the plugins/ directory, so you need to adjust your customizations to reflect that new location.
If your customizations are just customizations, then it should be simply a matter of moving them to the corresponding place under plugins/org.dita.pdf2.
If you created a Toolkit plugin with your customizations or created your own transformation type that extends the base PDF2 transformation type, then you'd need to update any references to the old demo directory.
Cheers,
E.
On 10/23/12 11:38 AM, "KAATMAN Matthew" <matthew.kaatman@biomerieux.com> wrote:
Hey Rob,
Thanks for the clarification. I'm still a bit confused though. I think it may be my terminology.
In Oxygen 13.x I had a 1.5.4 PDF customization I specified in the customization.dir parameter.
In Oxygen 14.1 they've switched to OT 1.6.1 which abandons the demo directory and I thought customizations were now called plugins.
Ultimately, I'm just trying to get my styles working for PDF in Oxygen 14.1/OT 1.6.1.
Am I following the right process?
Thanks for shedding light on this. I think I'm closer to understanding.
Matt
-----Original Message----- From: Echlin, Robert [mailto:Robert.Echlin@windriver.com] Sent: Tuesday, October 23, 2012 11:07 AM To: KAATMAN Matthew; Oxygen XML Editor Support; oxygen-user@oxygenxml.com Subject: RE: [oXygen-user] Converting DITA-OT plugin from 1.5.4 to 1.6
Hi Matthew, New transformation types are not visible in my version of oXygen, 13.2.
Radu is describing a case where your plugin modifies default processing. I have plugins that create new trans types with new functionality, but don't change the default transformations. I think that is what you are describing.
You need to create a new transform based on whatever transform is closest: probably XHTML or PDF, then add a new parameter in the new transformation. The new parameter is "transtype", the value is the name of your new transformation type.
Assuming you are modifying XHTML, you would do the following: - click on "DITA Map XHTML" - click on "Duplicate" button - The dialog for editing a transformation will appear - In the top of the dialog box, the "Name" field will say "DITA Map XHTML duplicate" - edit this name as you desire - The "parameters" tab will be open if you started with "XHTML", if you started with "PDF", click on "Parameters" tab - There is no "transtype" parameter - click "New" - Fill in the "Name" field with "transtype" - The value must be the name of your transtype as defined in your plugin - you can add a description if you like. I added " The transtype specifies what processinig is applied, at the highest level." (apparently I misspelled processing) - Hit OK. This exist the "Edit Parameter" dialog - Hit OK to exit the "Edit DITA Scenario" dialog - You are back to the "Configure Transformation Scenario" dialog. Click either "Save and Close" or "Transform Now". Any other action in this dialog will lose your edits and your new scenario.
Good luck! Rob -- Rob Echlin, Documentation Systems Architect, Wind River
-----Original Message----- From: oxygen-user-bounces@oxygenxml.com [mailto:oxygen-user-bounces@oxygenxml.com] On Behalf Of KAATMAN Matthew Sent: Tuesday, October 23, 2012 11:28 AM To: Oxygen XML Editor Support; oxygen-user@oxygenxml.com Subject: Re: [oXygen-user] Converting DITA-OT plugin from 1.5.4 to 1.6
Thanks Radu,
I realized my error with the plugin directory shortly after posting.
I adjusted the paths and ran the default DITA OT integrator option. Afterwards, I should be able to select new scenario -> DITA-OT transformation And then I should see my new transformation type?
If I don't see it, how can I troubleshoot? Would the integrator report errors if there was some problem?
I do have full write permissions to the directory where I installed it.
Thanks! Matt
-----Original Message----- From: oxygen-user-bounces@oxygenxml.com [mailto:oxygen-user-bounces@oxygenxml.com] On Behalf Of Oxygen XML Editor Support Sent: Tuesday, October 23, 2012 3:27 AM To: oxygen-user@oxygenxml.com Subject: Re: [oXygen-user] Converting DITA-OT plugin from 1.5.4 to 1.6
Hi Matt,
Oxygen comes with a bundled DITA OT installation located in:
OXYGEN_INSTALL_DIR\frameworks\dita\DITA-OT
There is indeed a plugins folder in Oxygen:
OXYGEN_INSTALL_DIR\plugins
but this folder is for Java-based plugins which provide additional functionality to an Oxygen installation using our Plugins SDK, so this is unrelated to the DITA OT transformations.
The DITA OT has also support for plugins, this folder is located in:
OXYGEN_INSTALL_DIR\frameworks\dita\DITA-OT\plugins
So this is the place where you should copy your plugin folder. Then you should run the transformation scenario "Run DITA OT Integrator" directly without modifying it. The transformation scenario will call the DITA OT integrator which will look inside the "plugins" folder and modify stylesheets and build files from the DITA OT to connect the extensions from each found plugin. In order for this to work the folder where Oxygen is installed needs to have full read-write rights, not a problem in your case as you have not installed in the Windows Program Files folder.
Regards, Radu
Radu Coravu <oXygen/> XML Editor, Schema Editor and XSLT Editor/Debugger http://www.oxygenxml.com
On 10/22/2012 7:11 PM, KAATMAN Matthew wrote:
Would anyone be willing to assist me in converting my plugin from 1.5.4 to 1.6?
I followed the instructions here:
http://dita-ot.sourceforge.net/1.6.1/readme/dita2pdf-customization.ht m l
From Oxygen, I duplicated the "Run DITA OT Integrator" scenario.
I changed the working directory and build file path to my new directory:
C:/PFW/Oxygen XML Editor 14.1/plugins/com.biomerieux.pdf_um/
I ran it:
Executing: "c:\pfw\oxygen xml editor 14.1\jre/bin/java" "-Dhttp.proxySet=true" "-Dhttp.proxyHost=10.16.0.59" "-Dhttp.proxyPort=8118" -Xmx256m -classpath "C:\PFW\Oxygen XML Editor 14.1/tools/ant/lib/ant-launcher.jar" "-Dant.home=C:\PFW\Oxygen XML Editor 14.1/tools/ant" org.apache.tools.ant.launch.Launcher -f "C:/PFW/Oxygen XML Editor 14.1/plugins/com.biomerieux.pdf_um/integrator.xml" "-Dstrict=true"
Buildfile: C:\PFW\Oxygen XML Editor 14.1\plugins\com.biomerieux.pdf_um\integrator.xml
BUILD SUCCESSFUL Total time: 0 seconds
The process finished with exit code: 0
Then I'm a bit lost. I thought at that point I could click new under the scenarios and I would see a transformation type that matched. Any guidance on where I've gone wrong?
Thanks! Matt
AVIS : Ce courrier et ses pieces jointes sont destines a leur seul destinataire et peuvent contenir des informations confidentielles appartenant a bioMerieux. Si vous n'etes pas destinataire, vous etes informe que toute lecture, divulgation, ou reproduction de ce message et des pieces jointes est strictement interdite. Si vous avez recu ce message par erreur merci d'en prevenir l'expediteur et de le detruire, ainsi que ses pieces jointes. NOTICE: This message and attachments are intended only for the use of their addressee and may contain confidential information belonging to bioMerieux. If you are not the intended recipient, you are hereby notified that any reading, dissemination, distribution, or copying of this message, or any attachment, is strictly prohibited. If you have received this message in error, please notify the original sender immediately and delete this message, along with any attachments.
_______________________________________________ oXygen-user mailing list oXygen-user@oxygenxml.com http://www.oxygenxml.com/mailman/listinfo/oxygen-user
_______________________________________________ oXygen-user mailing list oXygen-user@oxygenxml.com http://www.oxygenxml.com/mailman/listinfo/oxygen-user
AVIS : Ce courrier et ses pieces jointes sont destines a leur seul destinataire et peuvent contenir des informations confidentielles appartenant a bioMerieux. Si vous n'etes pas destinataire, vous etes informe que toute lecture, divulgation, ou reproduction de ce message et des pieces jointes est strictement interdite. Si vous avez recu ce message par erreur merci d'en prevenir l'expediteur et de le detruire, ainsi que ses pieces jointes. NOTICE: This message and attachments are intended only for the use of their addressee and may contain confidential information belonging to bioMerieux. If you are not the intended recipient, you are hereby notified that any reading, dissemination, distribution, or copying of this message, or any attachment, is strictly prohibited. If you have received this message in error, please notify the original sender immediately and delete this message, along with any attachments.
_______________________________________________ oXygen-user mailing list oXygen-user@oxygenxml.com http://www.oxygenxml.com/mailman/listinfo/oxygen-user
AVIS : Ce courrier et ses pieces jointes sont destines a leur seul destinataire et peuvent contenir des informations confidentielles appartenant a bioMerieux. Si vous n'etes pas destinataire, vous etes informe que toute lecture, divulgation, ou reproduction de ce message et des pieces jointes est strictement interdite. Si vous avez recu ce message par erreur merci d'en prevenir l'expediteur et de le detruire, ainsi que ses pieces jointes. NOTICE: This message and attachments are intended only for the use of their addressee and may contain confidential information belonging to bioMerieux. If you are not the intended recipient, you are hereby notified that any reading, dissemination, distribution, or copying of this message, or any attachment, is strictly prohibited. If you have received this message in error, please notify the original sender immediately and delete this message, along with any attachments.
_______________________________________________ oXygen-user mailing list oXygen-user@oxygenxml.com http://www.oxygenxml.com/mailman/listinfo/oxygen-user
-- Eliot Kimber Senior Solutions Architect, RSI Content Solutions "Bringing Strategy, Content, and Technology Together" Main: 512.554.9368 www.rsicms.com www.rsuitecms.com Book: DITA For Practitioners, from XML Press, http://xmlpress.net/publications/dita/practitioners-1/
AVIS : Ce courrier et ses pieces jointes sont destines a leur seul destinataire et peuvent contenir des informations confidentielles appartenant a bioMerieux. Si vous n'etes pas destinataire, vous etes informe que toute lecture, divulgation, ou reproduction de ce message et des pieces jointes est strictement interdite. Si vous avez recu ce message par erreur merci d'en prevenir l'expediteur et de le detruire, ainsi que ses pieces jointes. NOTICE: This message and attachments are intended only for the use of their addressee and may contain confidential information belonging to bioMerieux. If you are not the intended recipient, you are hereby notified that any reading, dissemination, distribution, or copying of this message, or any attachment, is strictly prohibited. If you have received this message in error, please notify the original sender immediately and delete this message, along with any attachments.
_______________________________________________ oXygen-user mailing list oXygen-user@oxygenxml.com http://www.oxygenxml.com/mailman/listinfo/oxygen-user
participants (4)
-
Echlin, Robert -
Eliot Kimber -
KAATMAN Matthew -
Oxygen XML Editor Support