Hi Peter, I am not sure how you want to use those extensions, I guess you want to use them in an XML Schema 1.1 in the xs:assert/@test attribute? In that case the suggestion below will not work but you can add your extensions library to the [oXygen]/lib folder and oXygen will load that automatically (for the Eclipse plugin you need to also edit the plugin.xml file to add a pointer to that library in the <runtime> section). On the other hand I have not checked if the XML Schema 1.1 spec allows using extension functions inside the xs:assert/@test attribute... Best Regards, George -- George Cristian Bina <oXygen/> XML Editor, Schema Editor and XSLT Editor/Debugger http://www.oxygenxml.com On 4/25/13 9:26 PM, oXygen XML Editor Support wrote:

Hello,

I've already replied to your question on the support email.

Please see the response forwarded below:

...

-------- Original Message -------- Subject: Re: Extension functions in validation scenario Date: Thu, 25 Apr 2013 20:45:46 +0300 From: oXygen XML Editor Support <support@oxygenxml.com> To: Rushforth, Peter <Peter.Rushforth@NRCan-RNCan.gc.ca>

Hello,

Thank you for contacting us.

The fastest way to add the jars containing your extension functions would be to add them as extensions in the transformation scenario. For that, you should go to the "Configure Transformation Scenario(s)", even by oXygen menu Document > Transformation, or using its corresponding icon in the Transformation toolbar then choose to "Edit" the scenario.

Once in the scenario editing dialog, in the "XSLT" (first) tab, you have "Extensions". Here is where your jars should go.

You could also add the extension using a Saxon configuration file, but this operation is more complex than the first. You can add the Saxon configuration file in the same edit scenario dialog, same tab (XSLT). For that you should access the "Advanced options" for the Saxon engine (yellow cogwheel icon neat the Transformer chooser).

Let us know if you need additional information or any further help.

Regards, Costin

Costin Sandoi oXygen XML Editor and Author Support

Tel: +1-650-352-1250 ext.302 Fax: +40-251-461482 support@oxygenxml.com http://www.oxygenxml.com

--------------------------------------------------------------------------- This message (including any attachments) contains confidential information and is intended only for the individual(s) named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. Any quotation contained herein has a validity of 30 days, unless otherwise specified.

On 4/25/2013 6:03 PM, Rushforth, Peter wrote:

...

Hi,

I have written some saxon extension functions which support XML Schema assertions.

Is there any way to add the jar containing those functions such that I can test them in Oxygen?

Thanks

Peter Rushforth

_______________________________________________ oXygen-user mailing list oXygen-user@oxygenxml.com http://www.oxygenxml.com/mailman/listinfo/oxygen-user

_______________________________________________ oXygen-user mailing list oXygen-user@oxygenxml.com http://www.oxygenxml.com/mailman/listinfo/oxygen-user

Hi, Sorry, yes I should have been clearer about my intended usage. I am using extension functions in XML Schema 1.1 assertions, and I have successfully processed them using Saxon 9.4.0.7 from Java / s9api, however it is a bit cumbersome to test them interactively that way. So I was looking for a way to add the jar file to the validation scenario, as can be done with a transformation scenario, along th elines of exactly the enhancement request you outline below. So count me in there! But I will give the [oXygen]/lib method a try as you suggest to see if that will work in the interim. Thank you. Peter

-----Original Message----- From: George Cristian Bina [mailto:george@oxygenxml.com] Sent: April 25, 2013 14:52 To: Rushforth, Peter Cc: oxygen-user@oxygenxml.com Subject: Re: [oXygen-user] Extension functions in validation scenario

I just want to add that we have an enhancement request to add support for specifying additional libraries also in validation scenarios, similar with what we provide for transformation scenarios.

Best Regards, George -- George Cristian Bina <oXygen/> XML Editor, Schema Editor and XSLT Editor/Debugger http://www.oxygenxml.com

On 4/25/13 9:50 PM, George Cristian Bina wrote:

...

Hi Peter,

I am not sure how you want to use those extensions, I guess you want to use them in an XML Schema 1.1 in the xs:assert/@test attribute? In that case the suggestion below will not work but you can add your extensions library to the [oXygen]/lib folder and oXygen will load that automatically (for the Eclipse plugin you need to also edit the plugin.xml file to add a pointer to that library in the <runtime> section). On the other hand I have not checked if the XML Schema 1.1 spec allows using extension functions inside the xs:assert/@test attribute...

Best Regards, George -- George Cristian Bina <oXygen/> XML Editor, Schema Editor and XSLT Editor/Debugger http://www.oxygenxml.com

On 4/25/13 9:26 PM, oXygen XML Editor Support wrote:

...

Hello,

I've already replied to your question on the support email.

Please see the response forwarded below:

...

-------- Original Message -------- Subject: Re: Extension functions in validation scenario Date: Thu, 25 Apr 2013 20:45:46 +0300 From: oXygen XML Editor Support <support@oxygenxml.com> To: Rushforth, Peter <Peter.Rushforth@NRCan-RNCan.gc.ca>

Hello,

Thank you for contacting us.

The fastest way to add the jars containing your extension functions would be to add them as extensions in the transformation scenario. For that, you should go to the "Configure Transformation Scenario(s)", even by oXygen menu Document > Transformation, or using its corresponding icon in the Transformation toolbar then choose to "Edit" the scenario.

Once in the scenario editing dialog, in the "XSLT" (first) tab, you have "Extensions". Here is where your jars should go.

You could also add the extension using a Saxon configuration file, but this operation is more complex than the first. You can add the Saxon configuration file in the same edit scenario dialog, same tab (XSLT). For that you should access the "Advanced options" for the Saxon engine (yellow cogwheel icon neat the Transformer chooser).

Let us know if you need additional information or any further help.

Regards, Costin

Costin Sandoi oXygen XML Editor and Author Support

Tel: +1-650-352-1250 ext.302 Fax: +40-251-461482 support@oxygenxml.com http://www.oxygenxml.com

---

...

...

------ This message (including any attachments) contains confidential information and is intended only for the individual(s) named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. Any quotation contained herein has a validity of 30 days, unless otherwise specified.

On 4/25/2013 6:03 PM, Rushforth, Peter wrote:

...

Hi,

I have written some saxon extension functions which support XML Schema assertions.

Is there any way to add the jar containing those functions such that I can test them in Oxygen?

Thanks

Peter Rushforth

_______________________________________________ oXygen-user mailing list oXygen-user@oxygenxml.com http://www.oxygenxml.com/mailman/listinfo/oxygen-user

_______________________________________________ oXygen-user mailing list oXygen-user@oxygenxml.com http://www.oxygenxml.com/mailman/listinfo/oxygen-user

_______________________________________________ oXygen-user mailing list oXygen-user@oxygenxml.com http://www.oxygenxml.com/mailman/listinfo/oxygen-user

Dear Peter, The integrated extensions can be registered to Saxon through an Initializer class or though a configuration file. We have support for setting a Saxon configuration file and an Initializer for XSLT and XQuery but not for XML Schema - this is on our todo list. It may be the case that Saxon looks automatically at some place for a configuration file - in that case that can be a workaround to setup your extensions, you will still need to have the library in the lib folder to have the extensions Java classes are accessible. Best Regards, George -- George Cristian Bina <oXygen/> XML Editor, Schema Editor and XSLT Editor/Debugger http://www.oxygenxml.com On 4/26/13 9:51 PM, Rushforth, Peter wrote:

Hi,

I added the classes and dependencies to the [oXygen]/lib folder, but it does not make a difference to Oxygen recognizing the extensions.

I don't quite see how it could, since the functions I write have to be explicitly registered with the saxon processor with code like :

proc.registerExtensionFunction(MyExtensionFunctions.validEpsg4326Locations);

for example.

Maybe this will have to wait for the validation scenarios enhancement.

Thanks Peter

...

-----Original Message----- From: George Cristian Bina [mailto:george@oxygenxml.com] Sent: April 25, 2013 14:52 To: Rushforth, Peter Cc: oxygen-user@oxygenxml.com Subject: Re: [oXygen-user] Extension functions in validation scenario

I just want to add that we have an enhancement request to add support for specifying additional libraries also in validation scenarios, similar with what we provide for transformation scenarios.

Best Regards, George -- George Cristian Bina <oXygen/> XML Editor, Schema Editor and XSLT Editor/Debugger http://www.oxygenxml.com

On 4/25/13 9:50 PM, George Cristian Bina wrote:

...

Hi Peter,

I am not sure how you want to use those extensions, I guess you want to use them in an XML Schema 1.1 in the xs:assert/@test attribute? In that case the suggestion below will not work but you can add your extensions library to the [oXygen]/lib folder and oXygen will load that automatically (for the Eclipse plugin you need to also edit the plugin.xml file to add a pointer to that library in the <runtime> section). On the other hand I have not checked if the XML Schema 1.1 spec allows using extension functions inside the xs:assert/@test attribute...

Best Regards, George -- George Cristian Bina <oXygen/> XML Editor, Schema Editor and XSLT Editor/Debugger http://www.oxygenxml.com

On 4/25/13 9:26 PM, oXygen XML Editor Support wrote:

...

Hello,

I've already replied to your question on the support email.

Please see the response forwarded below:

...

-------- Original Message -------- Subject: Re: Extension functions in validation scenario Date: Thu, 25 Apr 2013 20:45:46 +0300 From: oXygen XML Editor Support <support@oxygenxml.com> To: Rushforth, Peter <Peter.Rushforth@NRCan-RNCan.gc.ca>

Hello,

Thank you for contacting us.

The fastest way to add the jars containing your extension functions would be to add them as extensions in the transformation scenario. For that, you should go to the "Configure Transformation Scenario(s)", even by oXygen menu Document > Transformation, or using its corresponding icon in the Transformation toolbar then choose to "Edit" the scenario.

Once in the scenario editing dialog, in the "XSLT" (first) tab, you have "Extensions". Here is where your jars should go.

You could also add the extension using a Saxon configuration file, but this operation is more complex than the first. You can add the Saxon configuration file in the same edit scenario dialog, same tab (XSLT). For that you should access the "Advanced options" for the Saxon engine (yellow cogwheel icon neat the Transformer chooser).

Let us know if you need additional information or any further help.

Regards, Costin

Costin Sandoi oXygen XML Editor and Author Support

Tel: +1-650-352-1250 ext.302 Fax: +40-251-461482 support@oxygenxml.com http://www.oxygenxml.com

---

...

...

------ This message (including any attachments) contains confidential information and is intended only for the individual(s) named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. Any quotation contained herein has a validity of 30 days, unless otherwise specified.

On 4/25/2013 6:03 PM, Rushforth, Peter wrote:

...

Hi,

I have written some saxon extension functions which support XML Schema assertions.

Is there any way to add the jar containing those functions such that I can test them in Oxygen?

Thanks

Peter Rushforth

_______________________________________________ oXygen-user mailing list oXygen-user@oxygenxml.com http://www.oxygenxml.com/mailman/listinfo/oxygen-user

_______________________________________________ oXygen-user mailing list oXygen-user@oxygenxml.com http://www.oxygenxml.com/mailman/listinfo/oxygen-user

_______________________________________________ oXygen-user mailing list oXygen-user@oxygenxml.com http://www.oxygenxml.com/mailman/listinfo/oxygen-user