- oXygen-user - www.oxygenxml.com

Jing stack size
by Alex Brown 01 Oct '07

01 Oct '07

Hello I'm using oXygen (7.2) as a plugin for Eclipse (3.2) to develop a RELAX NG schema. The schema has now reached a size/complexity for which the Java JVM stack size needs to be increased for Jing (on the command line) to function correctly. Assuming oXygen uses Jing behind the scenes, how can I alter the JVM arguments used to invoke it? - Alex. ------------------------------------------------------------------------ ---- Alex Brown Director Griffin Brown Digital Publishing Ltd Orwell House Cowley Road Cambridge CB4 0PP United Kingdom t +44 (0) 1223 425730 f +44 (0) 1223 425384 w http://www.griffinbrown.co.uk/ b http://www.griffinbrown.co.uk/blog/ Griffin Brown Digital Publishing Limited is a company registered in England with company number 3298691. The registered Office is at 148 Salmons Lane, Caterham, Surrey CR3 0HA, UK. The VAT Registration No. is 702 8543 48. ------------------------------------------------------------------------ ----

2 1

oXygen 9 beta adding WYSIWYG like editing support
by George Cristian Bina 27 Sep '07

27 Sep '07

Hello, In case you did not find out already - we made available a beta version of oXygen 9 http://www.oxygenxml.com/download-beta.html A license key for testing v9 beta is available on the above page. Version 9 runs side by side with version 8 and it is recommended to backup your data as this is a beta version, that means it is not fully tested. The tagless editing support will be available also in the Eclipse plugin - we will make that available as well in a couple of weeks. Best Regards, George --------------------------------------------------------------------- George Cristian Bina - http://aboutxml.blogspot.com/ <oXygen/> XML Editor, Schema Editor and XSLT Editor/Debugger http://www.oxygenxml.com

1 0

stack overflow -- again
by Syd Bauman 25 Sep '07

25 Sep '07

I know this has been discussed on this list before, and I apologize for not just looking through the archives myself -- my excuse is that I'm on the road, due to teach using oXygen in a matter of hours, and all h#!! is breaking loose. I have generated some schemas that oXygen can't use to validate an instance; and, I note, oXygen can't validate them. In both cases it sufferes a stack overflow. I am using the current release and have set -Xmx999M and -Xms64M at the end of my oxygenMac.sh file (which is how I invoked oXygen). The schemas can be found at http://bauman.zapto.org/~syd/temp/temi.rnc http://bauman.zapto.org/~syd/temp/temi.rng I tried to validate the schemas w/o using oXygen. `jing` complained that the version of relaxng.rng that came with oXygen does not have a <start> element, but it says that temi.rng is valid against the relaxng.rnc that came with nxml-mode. `rnv` agrees on both counts. (I've also tried several diffferent combinations of TEI modules to see what would and would not cause a stack overflow, but do not have a definitive answer yet.) Can anyone provide any useful info here?

3 4

emacs key binding in eclipse
by RADAJEWSKI Jacek 24 Sep '07

24 Sep '07

Hi, I use emacs key bindings in Eclipse, but CTRL-S (incremental find/search) stops working after installing oXygen 8.2.0 plugin for Eclipse 3.2.2. Any ideas? Cheers Jacek Radajewski Technical Architect Architecture and Standards Queensland Government Chief Information Office Ph: +61 7 3235 9360 Mob: +61 422 018 501 ***************************** Disclaimer ***************************** The contents of this electronic message and any attachments are intended only for the addressee and may contain privileged or confidential information. They may only be used for the purposes for which they were supplied. If you are not the addressee, you are notified that any transmission, distribution, downloading, printing or photocopying of the contents of this message or attachments is strictly prohibited. The privilege of confidentiality attached to this message and attachments is not waived, lost or destroyed by reason of mistaken delivery to you. If you receive this message in error please notify the sender by return e-mail or telephone. Please note: the Department of Public Works carries out automatic software scanning, filtering and blocking of E-mails and attachments (including emails of a personal nature) for detection of viruses, malicious code, SPAM, executable programs or content it deems unacceptable. All reasonable precautions will be taken to respect the privacy of individuals as outlined in the DPW Privacy Plan. Personal information will only be used for official purposes, e.g. monitoring Departmental Personnel's compliance with Departmental Policies. Personal information will not be divulged or disclosed to others, unless as required by Departmental Policy and/or State or Commonwealth Law. Thank you.

2 2

Oxygen 8.2: File navigation dialogs very slow
by Eliot Kimber 24 Sep '07

24 Sep '07

I'm seeing an odd behavior on one of my machines which is that the file navigation dialogs for Oxygen have started responding very slowly. The problem appears to be limited to Oxygen (I don't see the problem in Eclipse or Explorer). It feels like a network timeout problem. Any idea what might cause this or how I can diagnose it? I've tried closing and restarting Oxygen of course. Cheers, E. ---- W. Eliot Kimber Senior Solutions Architect Really Strategies, Inc. 512 554 9368

2 4

Re: [oXygen-user] oxygen hangs when saving to URL
by Sorin Ristache 21 Sep '07

21 Sep '07

Dear Christian, The log files are many and very large. I looked in one of them and I could not find data about the hang. Until I look in all the log files that you sent please try to get a smaller oXygen log with the problem. For this you should close all the files that are already open in oXygen, close oXygen, remove all oxygen.log.* files, start oXygen again, reproduce the problem without any additional work in oXygen if that is possible and send again the generated oxygen.log.* file(s). Thank you, Sorin Christian Wittern wrote: > Sorin, > > here are the logfiles. > > Christian > > On 21/09/2007, Sorin Ristache <sorin(a)oxygenxml.com> wrote: >> Hello, >> >> Please send the log file again. Include all the oxygen.log.* files in >> the zip archive. >> >> >> Regards, >> Sorin >> >> >> Christian Wittern wrote: >>> On 21/09/2007, Christian Wittern <cwittern(a)gmail.com> wrote: >>>>> Can you send detailed steps specifying also the path to a file in the >>>>> eXist database for opening and saving the file for which oXygen hangs on >>>>> your computer? >>>>> >>>> Well, as I said here is the problem. It does not hang always, when it >>>> hangs, this mostly occurs after a few hours work. I will try to pay >>>> attention to what happened immediately before it hangs and tell it to >>>> you. >>> Well, it just happened again:-( This time, I can tell you what I did: >>> I saved the file /db/system/config/db/kbos/tls/en/en.xconf without >>> problem, then I saved the file >>> /db/system/config/db/kbos/tls/zh/zh.xconf, also without problems and >>> immediately after this, I saved >>> /db/system/config/db/kbos/tls/tls.xconf, at which point Oxygen stopped >>> responding. Do you need the logfile again? >>> >>> All the best, >>> >>> Christian >>> >> _______________________________________________ >> oXygen-user mailing list >> oXygen-user(a)oxygenxml.com >> http://www.oxygenxml.com/mailman/listinfo/oxygen-user >> > >

1 0

oxygen says W3C html strict DTD has errors
by Lars Huttar 21 Sep '07

21 Sep '07

Hello, I'm editing an HTML document in Oxygen. The document begins with <!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd"> When I try to save, Oxygen shows an "error" in the DTD: SystemID: http://www.w3.org/TR/html4/strict.dtd Location: 81:5 Description: The declaration for the entity "ContentType" must end with '>'. The offending location is the second of these three lines in strict.dtd: <!ENTITY % ContentType "CDATA" -- media type, as per [RFC2045] --> Maybe this is because the DTD is an SGML DTD rather than an XML one? I don't know, but it seems strange for a W3C DTD to be called erroneous! Incidentally, I think this DOCTYPE declaration was added by HTML Tidy, or possibly by an HTML editor program. Lars

2 5

Re: [oXygen-user] oxygen hangs when saving to URL
by Sorin Ristache 21 Sep '07

21 Sep '07

Hello, I could browse the content of the eXist database and open files in oXygen without problems by using the jar files from the latest eXist distribution available on the eXist website (eXist version 1.1.1 build 4311, build number 20061104). I opened the file db/shared/biblib.xq from the Database Explorer view of oXygen and I edited and saved it without errors or hangs. Also I opened the file using WebDAV (the Open URL action) and I edited and saved it using Ctrl + S without errors or hangs. The same thing happened when I saved the edited file to the same location using WebDAV (the Save to URL action). When I tried to save it to other location (db/shared/biblib2.xq, db/home/chris/biblib2.xq) the WebDAV server reported the 403 Forbidden error which means the guest user does not have permission to create new files. The same thing on both Windows XP and Mac OS X. Can you send detailed steps specifying also the path to a file in the eXist database for opening and saving the file for which oXygen hangs on your computer? Regards, Sorin Christian Wittern wrote: > Sorin, > > You will find the server at http://chw.zinbun.kyoto-u.ac.jp:8899, the > guest account is open. > BTW, I am not sure this is a fault of eXist at all, it only always > occurs when I press the "Save to URL" button and the only webdav server > I am using is eXist. > > Hope you can find out something about it. > > Christian > > Sorin Ristache wrote: >> Hello, >> >> The two log files show no errors or delays in the communication with the >> eXist server at http://localhost:8899/exist/xmlrpc. The connections to >> the server are opened, used for reading/writing and closed without >> errors. Can I get access to the server to test it myself in oXygen? >> >> >> Best regards, >> Sorin >> >> >> Christian Wittern wrote: >> >>> Sorin, >>> >>> oXygen hanged again, so I am sending you another log file. I hope you >>> find the reason. I can confirm that the eXist instance is still live and >>> responding to requests, also oXygen is using the drivers from exactly >>> the same eXist instance. >>> >>> All the best, >>> >>> Christian

2 3

Re: [oXygen-user] oxygen hangs when saving to URL
by Sorin Ristache 19 Sep '07

19 Sep '07

Hello, The two log files show no errors or delays in the communication with the eXist server at http://localhost:8899/exist/xmlrpc. The connections to the server are opened, used for reading/writing and closed without errors. Can I get access to the server to test it myself in oXygen? Best regards, Sorin Christian Wittern wrote: > Sorin, > > oXygen hanged again, so I am sending you another log file. I hope you > find the reason. I can confirm that the eXist instance is still live and > responding to requests, also oXygen is using the drivers from exactly > the same eXist instance. > > All the best, > > Christian > > Sorin Ristache wrote: >> Hello, >> >> I tried with the eXist server 1.1 build 20061104 which I see is the >> latest build available on the eXist website >> (eXist-1.1.1-newcore-build4311.jar) and also with a previous one (build >> 20061024) but I could not reproduce the hang problem. I tried on both >> Windows XP and Mac OS X 10.4.10 (PowerPC). I could open, edit and save >> files in oXygen 8.2 from the two eXist databases without problems. >> Please copy the attached file in your [oXygen-install-folder]/lib >> folder, restart oXygen, reproduce the problem and send us the >> [oXygen-install-folder]/oxygen.log file. >> >> >> Regards, >> Sorin >> >> >> Christian Wittern wrote: >> >>> Dear oXygen users and developers, >>> >>> When using oXygen to access files on the eXist database, I frequently >>> encounter a situation where oXygen hangs and stops responding to any input. >>> This occurs when saving to URL, especially, (although I am not 100% sure, >>> since this is difficult to test efficiently) but not always, when saving a >>> new file. I wonder what might cause this problem and how to avoid it. >>> >>> For your information, this happens on both Intel and PPC Macs with the >>> latest OS X installed (but I seem to recall having this also experienced >>> with a Windows XP machine), eXist is a recent SVN build. >>> >>> All the best, >>> >>> Christian Wittern

1 0

oxygen hangs when saving to URL
by Christian Wittern 18 Sep '07

18 Sep '07

Dear oXygen users and developers, When using oXygen to access files on the eXist database, I frequently encounter a situation where oXygen hangs and stops responding to any input. This occurs when saving to URL, especially, (although I am not 100% sure, since this is difficult to test efficiently) but not always, when saving a new file. I wonder what might cause this problem and how to avoid it. For your information, this happens on both Intel and PPC Macs with the latest OS X installed (but I seem to recall having this also experienced with a Windows XP machine), eXist is a recent SVN build. All the best, Christian Wittern -- Christian Wittern Institute for Research in Humanities, Kyoto University 47 Higashiogura-cho, Kitashirakawa, Sakyo-ku, Kyoto 606-8265, JAPAN

2 1