- oXygen-user - www.oxygenxml.com

ISO Schematron not supported in NVDL
by Jirka Kosek 04 Nov '09

04 Nov '09

Hi, it seems that although oXygen supports standalone and embedded ISO Schematron it is not able to process ISO Schematron schemas referenced from NVDL. I'm getting the following error: Engine name: Jing Severity: error Description: org.xml.sax.SAXParseException-no implementation available for schema language with namespace URI "http://purl.oclc.org/dsdl/schematron" in oXygen 11. Jirka -- ------------------------------------------------------------------ Jirka Kosek e-mail: jirka(a)kosek.cz http://xmlguru.cz ------------------------------------------------------------------ Professional XML consulting and training services DocBook customization, custom XSLT/XSL-FO document processing ------------------------------------------------------------------ OASIS DocBook TC member, W3C Invited Expert, ISO JTC1/SC34 member ------------------------------------------------------------------

3 3

Problem with DocBook 4.x stylesheet customizations
by Jirka Kosek 03 Nov '09

03 Nov '09

Hi, I have noticed that for some time oXygen is now shipping with namespaced DocBook stylesheets. This is just fine, but problem is that frameworks/docbook/catalog.xml contains the following rule: <rewriteURI uriStartString="http://docbook.sourceforge.net/release/xsl/current/" rewritePrefix="xsl/"/> This rule will cause import of namespaced stylesheets into customizations layers written against original non-namespaced stylesheets. As such customization layers do not reference DocBook elements in namespace result is mangled output. Would it be possible to either drop this entry completely from XML catalog or to ship oXygen with both namespaced and non-namespaced stylesheets? Thanks, Jirka -- ------------------------------------------------------------------ Jirka Kosek e-mail: jirka(a)kosek.cz http://xmlguru.cz ------------------------------------------------------------------ Professional XML consulting and training services DocBook customization, custom XSLT/XSL-FO document processing ------------------------------------------------------------------ OASIS DocBook TC member, W3C Invited Expert, ISO JTC1/SC34 member ------------------------------------------------------------------

2 1

selection plugin results to result pane?
by Christian Wittern 30 Oct '09

30 Oct '09

Hi there, In a recent discussion with fellow TEI encoders who use oXygen as one of their XML editors, as one of the reasons *nat* to use oXygen was mentioned that in oXygen one can not use a selection to, for example trigger a database lookup with a result displayed in a result panel. Now, pondering this question, I was looking at the plugin types and wondered, if the SelectionPlugin could be used to develop something like this. However, according to the documentation, apparently the results of the Selection Plugin always go back and replace the selection, which is unwanted in this case. Also, it is not clear to me, if actions taken in the plugin could show their results in the result pane? Best, Christian -- Christian Wittern Institute for Research in Humanities, Kyoto University 47 Higashiogura-cho, Kitashirakawa, Sakyo-ku, Kyoto 606-8265, JAPAN

2 5

Re: [oXygen-user] Scenario causes Oxegen 11 to become unresponsive
by Sorin Ristache 29 Oct '09

29 Oct '09

Thank you for the details. See the remarks below. Mark Wilson wrote: > (2) Platform: Vista Ultimate > (3) It happens every time I run these files in a debug scenario. I > have not tried any other files in this scenario, or any other > scenarios since in installed Version 11. They ran quite well in > Version 10. > (8). This morning, I ran the scenario again and the following happened. > a) I clicked the blue "run" arrow. > b) Oxygen reported, Transformation started. > c) After about a minute, it reported Transformation Completed", but > no text appeared in the text box. On my Vista Business computer the XSLT debugger completes the transformation in about 3 seconds. I don't think this time difference is caused by a large difference in hardware power between our computers if your computer is able to run Vista Ultimate and the same debugging session ends quickly in Oxygen 10.3 that runs on the same computer. > d) After another minute or so, the text box filled to near the > bottom. I tried to slide the text box scroll bar down, but nothing > happened. > e) After about 30 seconds, </fo:root> appeared at the bottom of the > text box. I get the result document in the Text output view of the debugger on a single line containing 307,318 characters. The the result document starts with <fo:root> and ends with </fo:root>. There is no vertical scroll bar in this view because the whole document is on a single line. I get the same result with Saxon-HE, Saxon-PE and Saxon-EE. Maybe we don't use the same files? Can you check that you tested with the same files that you posted to the mailing list? I attach the files received from you. Best regards, Sorin

1 1

Re: [oXygen-user] Batch transformations
by George Cristian Bina 28 Oct '09

28 Oct '09

Hi Wendell, We discovered some issues with the associations of transformation scenarios made from the project. Basically opening the Associate Transformation Scenario dialog and pressing Cancel or Escape to close it caused a revert to the previous associated scenario. We fixed these issues and we made them available also as oXygen 11 build 2009102810 available now from our download page http://www.oxygenxml.com/download_oxygenxml_editor.html Putting back the old Transform with... action is scheduled to be available in oXygen 11.1. Best Regards, George -- George Cristian Bina <oXygen/> XML Editor, Schema Editor and XSLT Editor/Debugger http://www.oxygenxml.com Wendell Piez wrote: > Dear George, > > At 02:01 PM 10/23/2009, you wrote: >> That functionality should be covered now with the support to associate >> transformation scenarios on the project selected files, including >> folders. So you can use the "Configure transformation scenario..." >> action on a folder (or on your selection) and select the scenario then >> close the dialog with the "Transform now" button if you want the >> scenario to be applied immediately after closing the dialog. Further >> you can trigger the transformation again with the "Apply >> transformation scenario" action. > > Thanks: I knew it was something simple like that. > >> Thinking now about this I think it may be good to add also the >> "Transform with..." action back as that allows applying a scenario >> without associating it with the documents (or folders). Let me know >> also if your use case is not covered by this scenario association that >> we have in version 11. > > I think my immediate use case is probably covered (I'll get back to you > if not), but I also agree that is sometimes useful to run a > transformation scenario without making a formal association or changing > the association you have. > > Cheers, > Wendell > > > > ====================================================================== > Wendell Piez mailto:wapiez@mulberrytech.com > Mulberry Technologies, Inc. http://www.mulberrytech.com > 17 West Jefferson Street Direct Phone: 301/315-9635 > Suite 207 Phone: 301/315-9631 > Rockville, MD 20850 Fax: 301/315-8285 > ---------------------------------------------------------------------- > Mulberry Technologies: A Consultancy Specializing in SGML and XML > ====================================================================== >

2 1

Batch transformations
by Wendell Piez 28 Oct '09

28 Oct '09

Hi, In the Projects View in v10.3, the context menu items for files and folders included one that allowed the application of a Transformation Scenario that hadn't yet been associated with the document(s) -- "Transform with..." or some such. (It was analogous to validating with an external schema. You picked the Transformation Scenario you wanted to run, and voila.) This menu option is gone from 11.0 and I miss it. It was especially useful for transforming documents in batches. I suspect there is another way to achieve the same thing. Any tips? Cheers, Wendell ====================================================================== Wendell Piez mailto:wapiez@mulberrytech.com Mulberry Technologies, Inc. http://www.mulberrytech.com 17 West Jefferson Street Direct Phone: 301/315-9635 Suite 207 Phone: 301/315-9631 Rockville, MD 20850 Fax: 301/315-8285 ---------------------------------------------------------------------- Mulberry Technologies: A Consultancy Specializing in SGML and XML ======================================================================

5 6

security risk when using exist from oxygen ?!
by Christian Wittern 26 Oct '09

26 Oct '09

Hi there, I just discovered what I think is a security risk, or at least a flaw in the way oxygen presents system ids. When evaluating a XPath for a document that is accessed through webdav on an eXist database, the results are displayed in the bottom pane of the window. The column for system ID will show the users credentials, that is, account name and password in clear text. It seems a potential risk to me to expose these things, so I wonder if there is a way to hide that. All the best, Christian -- Christian Wittern Institute for Research in Humanities, Kyoto University 47 Higashiogura-cho, Kitashirakawa, Sakyo-ku, Kyoto 606-8265, JAPAN

5 6

global global open option?
by Syd Bauman 22 Oct '09

22 Oct '09

oXygen has four potential "modes" with which to view a file: Text, Grid, Author, and Design. I *always* want files ot open in Text mode initially. I realize that for any given document type, I can change the ihitial opening mode to Text mode in the "Document Type Association" preferences pane, as long as I tell it I'm a developer. But is there a way to do them all at once? That's just for me. But the problem is bigger than that. I'm about to teach a TEI workshop using oXygen. They've bought a license and are busy installing oXygen 11 on a bunch of machines. It could be pedagogically counter-productive if when the students open their first template file, they get Author mode instead of Text mode. Is there a way I can change this behavior globally? Or at least a way to get this behavior without asking those doing the installation to manually adjust the preferences each time? (It takes roughly a dozen clicks/actions.) E.g., would it work to set the preferences the way I want them once, and then copy that instllilation to other machines? Can we just copy over a single preferences or framework file? Thanks.

2 1

Re: [oXygen-user] Way to Open Files that Start with "." on OS X/Linux?
by Beims Bob-RWBC70 20 Oct '09

20 Oct '09

I found this thread in the archives, which refers to and upcoming option in 9.3 ... http://www.oxygenxml.com/pipermail/oxygen-user/2008-June/001810.html I'm now using 10.3 and don't see the option to show "." files on Mac OS X. Did this option never materialize, disappear from 10.3, or am I just unable to find it? Thanks, Bob

2 1

[ann] oXygen XML Editor version 11
by George Cristian Bina 19 Oct '09

19 Oct '09

Hi, First I want to thank you for the feedback during the beta testing of oXygen 11. I am pleased to let you know that we just made oXygen version 11 final release available from our website http://www.oxygenxml.com The complete list of new additions in version 11 and details can be read at http://www.oxygenxml.com/index.html#new-version Best Regards, George -- George Cristian Bina <oXygen/> XML Editor, Schema Editor and XSLT Editor/Debugger http://www.oxygenxml.com

5 7