- oXygen-user - www.oxygenxml.com

RE: [oXygen-user] Oxygen verion 9.3 doesn't recognise XLST2.0 function "lower-case" [SEC=UNCLASSIFIED]
by John.Hockaday＠ga.gov.au 30 Oct '08

30 Oct '08

Hi All, Thanks for all your suggestions. I loaded the XSL that Sorin sent and it validated without errors. I checked my Options -> Preferences -> XSLT -> XSLT 2.0 options and I have selected Saxon-B 9.0.0.6. I then went back to edit the configuration transformation scenario and found the problem. For some unknown reason to logic I somehow had set the "Transformer" option to Saxon 6. Once I set this to Saxon-B 9.0.0.6 the translation worked. ;--) Sorry for causing you all to think about this problem. I should have thought to look at those settings. Instead of looking at the global settings. I'm sorry for the incompetence. ):--( Thanks to you all for the help. I love these support lists. I get great and accurate answers nearly every time. ;--) John > -----Original Message----- > From: oxygen-user-bounces(a)oxygenxml.com > [mailto:oxygen-user-bounces@oxygenxml.com] On Behalf Of Sorin Ristache > Sent: Thursday, 30 October 2008 11:34 PM > To: oxygen-user(a)oxygenxml.com > Subject: Re: [oXygen-user] Oxygen verion 9.3 doesn't > recognise XLST2.0 function "lower-case" [SEC=UNCLASSIFIED] > > > Hello, > > No, the default validator is Saxon 9 because the XSL editor > will detect > automatically the XSLT version from <xsl:stylesheet version="2.0" ... > > Your XSLT 2.0 code fragment is valid. I just tried that in > Oxygen. Just > to make sure the error refers to that code fragment please run the > action Validate Document (the Validate toolbar or the Document -> > Validate menu) on the attached stylesheet. Is there any > validation error? > > > Regards, > Sorin > > > Tommy Nordgren wrote: > > Check what xslt transformer is used for the actual > transformation. > > As far as I know, it's Saxon 6.5 , (which is an xslt 1.0 > transformer) by > > default. > >> A snippet of the XSL code is: > >> > >> <?xml version="1.0" encoding="UTF-8"?> > >> <xsl:stylesheet version="2.0" ... > >> ... > >

1 0

Oxygen verion 9.3 doesn't recognise XLST 2.0 function "lower-case" [SEC=UNCLASSIFIED]
by John.Hockaday＠ga.gov.au 30 Oct '08

30 Oct '08

Hi, I am running Oxygen9.3. I am trying to use an XSLT 2.0 function "lower-case()". For some reason the XLST doesn't recognise this function. I get the error: SystemID: G:\asdd\work\dif2anzlic\DIF-ISO-ANZLIC.xsl Location: 1378:0 Description: Error in expression lower-case(.): Unknown system function: lower-case I don't understand why this is not working. I have set my preferences to use Saxon-B 9.0.0.6 for XSLT 2.0 Validation. Is there some other setting that I need to make? A snippet of the XSL code is: <?xml version="1.0" encoding="UTF-8"?> <xsl:stylesheet version="2.0" ... ... <xsl:for-each select="dif:ISO_Topic_Category"> <gmd:topicCategory> <gmd:MD_TopicCategoryCode> <xsl:value-of select="lower-case(normalize-space(.))"/> </gmd:MD_TopicCategoryCode> </gmd:topicCategory> </xsl:for-each> ... Thanks. John

4 3

Custom editor variables
by Florent Georges 29 Oct '08

29 Oct '08

Hi, It seems there is a defined, finite set of editor variables. I didn't find any way to create my own variables. Did I miss something? My problem is: I have some stylesheets I am working on in a separate directory than the oXygen project directory. And that directory can change from time to time. Instead of changing each scenario each time that directory changes, I would like to define an editor variable, my-dir, and use it in the scenarios: "${my-dir}/sub/sheet.xsl" Regards, -- Florent Georges http://www.fgeorges.org/

2 5

Entering Unicode characters
by Thomas Zastrow 29 Oct '08

29 Oct '08

Hello, ist it possible to enter unicode characters into oXygen by the use of shortcuts? I only found the "Character Map" which is also described here: http://www.oxygenxml.com/doc/ug-oxygen/editing-documents.html#working-with-… but thats nit very convenient ... :-) Best, Tom -- Thomas Zastrow Seminar fuer Sprachwissenschaft Universitaet Tuebingen http://www.sfs.uni-tuebingen.de/dialectometry/ Wilhelm Str. 19 D-72074 Tübingen Tel.: 07071/29-73968 Fax: 07071/29-5214

4 3

XQuery (or XPath) console?
by Florent Georges 28 Oct '08

28 Oct '08

Hi, I should have missed something, but I can't find a tool in oXygen to evaluate XQuery (or at least XPath) expressions. For instance, I have a set of XML files in a directory, and I'd like to know which has the most 'elem' elements. So I'd like to evaluate a query (without creating a new file, if possible selecting the default collection with a file dialog, and if possible recording the query as part of the project) something like: for $d in collection() order by count(//elem) return document-uri(.) Does something similar exist in oXygen? Regards, -- Florent Georges http://www.fgeorges.org/

2 2

xsl:result-document with no href causes "Cannot write to a URI that has already been read" err-XTRE1500
by Andrew Welch 28 Oct '08

28 Oct '08

Hi, Congratulations on integrating Saxon-SA - a great move! I think there is a slight issue, this stylesheet (when run against itself with no output file given) causes the exception "Cannot write to a URI that has already been read": <xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="2.0"> <xsl:template match="/"> <xsl:result-document validation="strict"> <foo/> </xsl:result-document> </xsl:template> </xsl:stylesheet> Also, in the "Saxon SA" specific options, -val and -vlax should be radio buttons shouldn't they (with a third option for skip)? I personally would like like the default to be -vlax rather than -val, otherwise you are forced to disable it if you want to use Saxon SA but aren't using input validation. One last thing, an inbuilt "xslt 2.0" file/new template would be great, with: <xsl:stylesheet version="2.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:xs="http://www.w3.org/2001/XMLSchema" exclude-result-prefixes="xs"> thanks -- Andrew Welch http://andrewjwelch.com Kernow: http://kernowforsaxon.sf.net/

5 10

RE: [oXygen-user] Number of recursive levels in XML Instance generator in Oxygen 10.0 [SEC=UNCLASSIFIED]
by John.Hockaday＠ga.gov.au 28 Oct '08

28 Oct '08

Hi George, Thanks for that information. It looks like I'll be going for version 10.0 ASAP. ;--) John > -----Original Message----- > From: George Cristian Bina [mailto:george@oxygenxml.com] > Sent: Tuesday, 28 October 2008 5:29 PM > To: Hockaday John > Cc: oxygen-user(a)oxygenxml.com > Subject: Re: [oXygen-user] Number of recursive levels in XML > Instance generator in Oxygen 10.0 [SEC=UNCLASSIFIED] > > > Hi John, > > See the Maximum recursivity level option on the Options page on the > instance generator dialog: > http://www.oxygenxml.com/doc/ug-oxygen/xml-schema-instance-gen erator.html#d4e4823 Best Regards, George -- George Cristian Bina <oXygen/> XML Editor, Schema Editor and XSLT Editor/Debugger http://www.oxygenxml.com John.Hockaday(a)ga.gov.au wrote: > Hi, > > I have noticed that a feature in Oxygen 10.0 is the XML instance generator > from W3C XML Schemas. I use the ISO 19139 W3C XML Schemas with my work. In > these there is an element called "MD_Identifier" which has an 'authority' > element as one of its children. The 'authority' element is of type > 'CI_Citation' which has a child element of 'identifier'. This 'identifier' > element is of type 'MD_Identifier' so you see that there is a recursive call > on the 'MD_Identifier' element. > > If these W3C XML Schemas were used to generate an XML document instance, the > resulting XML would just keep on being built until the process was stopped > unless there was a way of setting the number of times or levels that an > element is recursively called. Can this be set in Oxygen 10.0? That is, can > I stop the recursive call of an element and its children after so many loops? > > Thanks. > > > John > _______________________________________________ > oXygen-user mailing list > oXygen-user(a)oxygenxml.com > http://www.oxygenxml.com/mailman/listinfo/oxygen-user

1 0

Number of recursive levels in XML Instance generator in Oxygen 10.0 [SEC=UNCLASSIFIED]
by John.Hockaday＠ga.gov.au 28 Oct '08

28 Oct '08

Hi, I have noticed that a feature in Oxygen 10.0 is the XML instance generator from W3C XML Schemas. I use the ISO 19139 W3C XML Schemas with my work. In these there is an element called "MD_Identifier" which has an 'authority' element as one of its children. The 'authority' element is of type 'CI_Citation' which has a child element of 'identifier'. This 'identifier' element is of type 'MD_Identifier' so you see that there is a recursive call on the 'MD_Identifier' element. If these W3C XML Schemas were used to generate an XML document instance, the resulting XML would just keep on being built until the process was stopped unless there was a way of setting the number of times or levels that an element is recursively called. Can this be set in Oxygen 10.0? That is, can I stop the recursive call of an element and its children after so many loops? Thanks. John

2 1

Bug in Tounament.xml?
by Florent Georges 27 Oct '08

27 Oct '08

Hi I have intalled the new oXygen 10, and the sample XML file schematron/iso/tournament/Tournament.xml contains: <Type>Singles</Type> <Date>2001-03-20</Date> <Participants nbrParticipants="3"> <Name id="p1">Nick</Name> <Name id="p2">Marcus</Name> <Name id="p3">Eddie</Name> </Participants> <Teams nbrTeams="5"> <Team id="t1" Name="Team 1"> <Member>p1</Member> </Team> <Team id="t2" Name="Team 2"> <Member>p2</Member> </Team> <Team id="t3" Name="Team 3"> <Member>p3</Member> </Team> </Teams> You can see that Teams/@nbrTeams eq 5, while there is only 3 Team elements. This is actually caught by the associated Schematron schema, by the assert: ../t:Participants/@nbrParticipants = ../t:Teams/@nbrTeams Seems like a bug? Regards, -- Florent Georges http://www.fgeorges.org/

3 4

Dialog box resize bug
by Florent Georges 27 Oct '08

27 Oct '08

Hi When I open a file (Ctrl+O) I get a dialog box, but if I resize it the "Open" and "Cancel" buttons are not moved. See the enclosed screenshot. Regards, -- Florent Georges http://www.fgeorges.org/

2 1