October 2009 - oXygen-user - www.oxygenxml.com

Selecting multiple XML file at once for the Schema Converter (trang)
by mozer 02 Jun '11

02 Jun '11

Hi, Problably I didn't see it, but there is no way for me to select a bunch of XML file and add them to generate a schema The only way is too select the file one by one which is tedious Any idea of how to circumvent that ? Xmlizer

3 10

Embedding fonts in Oxygen for FOP
by Mark Wilson 19 Feb '10

19 Feb '10

I am trying to embed a font containing Czech glyphs. Following Oxygen's instructions to embed a font in FOP for pdf output: On my Windows Vista system, with Apache FOP 0.95 and Oxygen 10.1, when I run ttfConvert.bat (see below), I get the error: Exception in thread "main" java.lang.NoClassDefFoundError: org/apache/fop/fonts/apps/TTFReader Caused by: java.lang.ClassNotFoundException: org.apache.fop.fonts.apps.TTFReader. When I look in that directory, there is an html file with that name, but no Java file. I do note at the head of the Oxygen document, it says for the built in FOP, but there is no org.apache... sub directory under oxygen Can you help? Thanks, Mark set LIB=lib set CMD=java -cp "%LIB%\fop.jar;%LIB%\avalon-framework-4.2.0.jar set CMD=%CMD%;%LIB%\xml-apis.jar;%LIB%\xercesImpl.jar;%LIB%\xalan.jar set CMD=%CMD%;%LIB%\serializerOxygen.jar" org.apache.fop.fonts.apps.TTFReader set FONT_DIR=C:\Windows\Fonts %CMD% %FONT_DIR%\Tleeur.ttf TLEastEurope.xml

3 3

Saxon configurations
by Wendell Piez 25 Dec '09

25 Dec '09

Hi, Among the recent changes in Saxon 9.2, the way it sets up support for numbering in languages other than English has changed. It comes with classes for German, French, Danish, Dutch and some others, but none of these work without being configured. The configuration is done by providing Saxon at runtime with a configuration file, or by modifying a class. Maybe oXygen hasn't caught up yet with these changes in Saxon, or maybe I don't know where to look, but I can't see where I can create or modify such a configuration file for Saxon in oXygen. Any ideas? Thanks, Wendell ====================================================================== Wendell Piez mailto:wapiez@mulberrytech.com Mulberry Technologies, Inc. http://www.mulberrytech.com 17 West Jefferson Street Direct Phone: 301/315-9635 Suite 207 Phone: 301/315-9631 Rockville, MD 20850 Fax: 301/315-8285 ---------------------------------------------------------------------- Mulberry Technologies: A Consultancy Specializing in SGML and XML ======================================================================

4 8

no luck with xproc scenario
by Christian Wittern 04 Nov '09

04 Nov '09

Hi there, Today I got my first XProc file working and now I am struggling to drive it from oxygen. What I would like to achieve is that the input and output files are taken from the environment in a similar way as the XSLT scenario does. However, the input port dialog does not let me input editor variables, although the help seems to suggest that this should be possible. And on the output side, I can set an editor variable, but if I set it to contain ${cfn} as I usually do, this turns out to be the filename of the XPRoc file, not of the input file, so it is the same for all files and thus not useful. Either I am seriously misunderstanding how this is supposed to work, or there are some bugs to fix here. Cheers, Christian -- Christian Wittern Institute for Research in Humanities, Kyoto University 47 Higashiogura-cho, Kitashirakawa, Sakyo-ku, Kyoto 606-8265, JAPAN

2 3

selection plugin results to result pane?
by Christian Wittern 30 Oct '09

30 Oct '09

Hi there, In a recent discussion with fellow TEI encoders who use oXygen as one of their XML editors, as one of the reasons *nat* to use oXygen was mentioned that in oXygen one can not use a selection to, for example trigger a database lookup with a result displayed in a result panel. Now, pondering this question, I was looking at the plugin types and wondered, if the SelectionPlugin could be used to develop something like this. However, according to the documentation, apparently the results of the Selection Plugin always go back and replace the selection, which is unwanted in this case. Also, it is not clear to me, if actions taken in the plugin could show their results in the result pane? Best, Christian -- Christian Wittern Institute for Research in Humanities, Kyoto University 47 Higashiogura-cho, Kitashirakawa, Sakyo-ku, Kyoto 606-8265, JAPAN

2 5

Re: [oXygen-user] Scenario causes Oxegen 11 to become unresponsive
by Sorin Ristache 29 Oct '09

29 Oct '09

Thank you for the details. See the remarks below. Mark Wilson wrote: > (2) Platform: Vista Ultimate > (3) It happens every time I run these files in a debug scenario. I > have not tried any other files in this scenario, or any other > scenarios since in installed Version 11. They ran quite well in > Version 10. > (8). This morning, I ran the scenario again and the following happened. > a) I clicked the blue "run" arrow. > b) Oxygen reported, Transformation started. > c) After about a minute, it reported Transformation Completed", but > no text appeared in the text box. On my Vista Business computer the XSLT debugger completes the transformation in about 3 seconds. I don't think this time difference is caused by a large difference in hardware power between our computers if your computer is able to run Vista Ultimate and the same debugging session ends quickly in Oxygen 10.3 that runs on the same computer. > d) After another minute or so, the text box filled to near the > bottom. I tried to slide the text box scroll bar down, but nothing > happened. > e) After about 30 seconds, </fo:root> appeared at the bottom of the > text box. I get the result document in the Text output view of the debugger on a single line containing 307,318 characters. The the result document starts with <fo:root> and ends with </fo:root>. There is no vertical scroll bar in this view because the whole document is on a single line. I get the same result with Saxon-HE, Saxon-PE and Saxon-EE. Maybe we don't use the same files? Can you check that you tested with the same files that you posted to the mailing list? I attach the files received from you. Best regards, Sorin

1 1

Re: [oXygen-user] Batch transformations
by George Cristian Bina 28 Oct '09

28 Oct '09

Hi Wendell, We discovered some issues with the associations of transformation scenarios made from the project. Basically opening the Associate Transformation Scenario dialog and pressing Cancel or Escape to close it caused a revert to the previous associated scenario. We fixed these issues and we made them available also as oXygen 11 build 2009102810 available now from our download page http://www.oxygenxml.com/download_oxygenxml_editor.html Putting back the old Transform with... action is scheduled to be available in oXygen 11.1. Best Regards, George -- George Cristian Bina <oXygen/> XML Editor, Schema Editor and XSLT Editor/Debugger http://www.oxygenxml.com Wendell Piez wrote: > Dear George, > > At 02:01 PM 10/23/2009, you wrote: >> That functionality should be covered now with the support to associate >> transformation scenarios on the project selected files, including >> folders. So you can use the "Configure transformation scenario..." >> action on a folder (or on your selection) and select the scenario then >> close the dialog with the "Transform now" button if you want the >> scenario to be applied immediately after closing the dialog. Further >> you can trigger the transformation again with the "Apply >> transformation scenario" action. > > Thanks: I knew it was something simple like that. > >> Thinking now about this I think it may be good to add also the >> "Transform with..." action back as that allows applying a scenario >> without associating it with the documents (or folders). Let me know >> also if your use case is not covered by this scenario association that >> we have in version 11. > > I think my immediate use case is probably covered (I'll get back to you > if not), but I also agree that is sometimes useful to run a > transformation scenario without making a formal association or changing > the association you have. > > Cheers, > Wendell > > > > ====================================================================== > Wendell Piez mailto:wapiez@mulberrytech.com > Mulberry Technologies, Inc. http://www.mulberrytech.com > 17 West Jefferson Street Direct Phone: 301/315-9635 > Suite 207 Phone: 301/315-9631 > Rockville, MD 20850 Fax: 301/315-8285 > ---------------------------------------------------------------------- > Mulberry Technologies: A Consultancy Specializing in SGML and XML > ====================================================================== >

2 1

Batch transformations
by Wendell Piez 28 Oct '09

28 Oct '09

Hi, In the Projects View in v10.3, the context menu items for files and folders included one that allowed the application of a Transformation Scenario that hadn't yet been associated with the document(s) -- "Transform with..." or some such. (It was analogous to validating with an external schema. You picked the Transformation Scenario you wanted to run, and voila.) This menu option is gone from 11.0 and I miss it. It was especially useful for transforming documents in batches. I suspect there is another way to achieve the same thing. Any tips? Cheers, Wendell ====================================================================== Wendell Piez mailto:wapiez@mulberrytech.com Mulberry Technologies, Inc. http://www.mulberrytech.com 17 West Jefferson Street Direct Phone: 301/315-9635 Suite 207 Phone: 301/315-9631 Rockville, MD 20850 Fax: 301/315-8285 ---------------------------------------------------------------------- Mulberry Technologies: A Consultancy Specializing in SGML and XML ======================================================================

5 6

security risk when using exist from oxygen ?!
by Christian Wittern 26 Oct '09

26 Oct '09

Hi there, I just discovered what I think is a security risk, or at least a flaw in the way oxygen presents system ids. When evaluating a XPath for a document that is accessed through webdav on an eXist database, the results are displayed in the bottom pane of the window. The column for system ID will show the users credentials, that is, account name and password in clear text. It seems a potential risk to me to expose these things, so I wonder if there is a way to hide that. All the best, Christian -- Christian Wittern Institute for Research in Humanities, Kyoto University 47 Higashiogura-cho, Kitashirakawa, Sakyo-ku, Kyoto 606-8265, JAPAN

5 6

global global open option?
by Syd Bauman 22 Oct '09

22 Oct '09

oXygen has four potential "modes" with which to view a file: Text, Grid, Author, and Design. I *always* want files ot open in Text mode initially. I realize that for any given document type, I can change the ihitial opening mode to Text mode in the "Document Type Association" preferences pane, as long as I tell it I'm a developer. But is there a way to do them all at once? That's just for me. But the problem is bigger than that. I'm about to teach a TEI workshop using oXygen. They've bought a license and are busy installing oXygen 11 on a bunch of machines. It could be pedagogically counter-productive if when the students open their first template file, they get Author mode instead of Text mode. Is there a way I can change this behavior globally? Or at least a way to get this behavior without asking those doing the installation to manually adjust the preferences each time? (It takes roughly a dozen clicks/actions.) E.g., would it work to set the preferences the way I want them once, and then copy that instllilation to other machines? Can we just copy over a single preferences or framework file? Thanks.

2 1