June 2011 - oXygen-user - www.oxygenxml.com

Configuration of profiling attributes and their values
by Jirka Kosek 04 Oct '11

04 Oct '11

Hi, would it be possible to move configuration of profiling attributes and their values into document type? I often create customized version of DocBook for my customer and part of this customization are also preconfigured values for profiling in schema. Schema and other necessary files are distributed as an oXygen framework so it makes sense to configure profiling attributes here then as a global/project options. Thanks, Jirka -- ------------------------------------------------------------------ Jirka Kosek e-mail: jirka(a)kosek.cz http://www.kosek.cz ------------------------------------------------------------------ Profesionální školení a poradenství v oblasti technologií XML. Podrobný přehled školení http://xmlguru.cz/skoleni/ ------------------------------------------------------------------ http://docbook.cz Stránky o dokumentačním formátu DocBook http://xmlguru.cz Blog mostly about XML for English readers ------------------------------------------------------------------

4 9

How to pass the custom schema url from a validation scenario to a custom validation engine?
by Stefan Krause 04 Jul '11

04 Jul '11

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello, I had configured a custom validation engine. It works fine if I invoke it with the validation button and a detected schema (referenced by <?oxygen?>-PI). If I use the same custom engine from inside of a validation scenario with a custom schema url, validation fails because ${ds}/${dsu} are not set. How can I pass the custom schema URL from the validation scenario to the validation engine? I suppose there is an other editor variable, but I couldn't find it. Thanks, Stefan -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.14 (MingW32) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAk4MoAoACgkQ6m+l2LO+BGxZ+wCgyzRZs7eQcl+HBh04M3Zk/NbR NEAAnjd6ELP7rhQRG+GIUwAJ9BMks7Kl =XdDy -----END PGP SIGNATURE-----

2 5

Viewing . (dot) directories / files in OS X
by Beims Bob-RWBC70 01 Jul '11

01 Jul '11

How does one go about setting an option in oXygen Editor (Enterprise) to view files/folders whose names start with . (dot)? Bob

2 3

Tables with width in percents
by Mike Starov 24 Jun '11

24 Jun '11

Hello all. I am working on customizing DocBook for our publishing department. I have a difficulty displaying tables in Author mode with "width" set in percents. The table itself is displayed fine with width corresponding to % of the page set in width attribute, but the columns are displayed as much narrower. There is a big chunk of empty space on the right that's not taken up but the columns. As soon as I change tables width to a set value like 500 the columns expand and take up the whole table space. Example below. Try pasting it and seeing how it gets displayed in oXygen. I know that DocBook schema bundled with Oxygen complains about width attribute but it is supported by HTML tables and there are rules for it in CSS. How can I fix this. I tried playing with CSS but could not find any solution. I looked at the API and there is some interfaces that seem to be able to help with this but It seems pretty complicated. I need some help getting started. <?xml version="1.0" encoding="UTF-8"?> <sect1 xmlns="http://docbook.org/ns/docbook" version="5.0"> <title>First section</title> <para> <table frame="all" width="80%"> <title>This is table with % width</title> <tgroup cols="4"> <colspec colname="c1" colnum="1" colwidth="1.0*"/> <colspec colname="c2" colnum="2" colwidth="1.0*"/> <thead> <row> <entry>H</entry> <entry>A</entry> </row> </thead> <tbody> <row> <entry>1</entry> <entry>2</entry> </row> </tbody> </tgroup> </table> <table frame="all" width="500"> <title>This is table with fixed width</title> <tgroup cols="4"> <colspec colname="c1" colnum="1" colwidth="1.0*"/> <colspec colname="c2" colnum="2" colwidth="1.0*"/> <thead> <row> <entry>H</entry> <entry>A</entry> </row> </thead> <tbody> <row> <entry>1</entry> <entry>2</entry> </row> </tbody> </tgroup> </table> <table frame="all" width="80%"> <caption>Nother table HTML</caption> <col width="50%"/> <col width="50%"/> <thead> <tr> <th>A</th> <th>B</th> </tr> </thead> <tbody> <tr> <td/> <td/> </tr> </tbody> </table> <table frame="all" width="500"> <caption>Nother table HTML fixed width</caption> <col width="50%"/> <col width="50%"/> <thead> <tr> <th>A</th> <th>B</th> </tr> </thead> <tbody> <tr> <td/> <td/> </tr> </tbody> </table> </para> </sect1> Sincerely, Mike Starovoytov Software Engineer CME Resource 1482 Stone Point Drive, Suite 120 Roseville, CA 95661-2839 Telephone: 800-232-4238, extension 193 Fax: (916) 783-6067 Email: mike.starov(a)netce.com

2 4

How to turn of file filtering when using workspace.chooseFile method?
by Michael Anthony Smith 24 Jun '11

24 Jun '11

I have been developing an oXygen plugin and am using oXygen's 'workspace.chooseFile' filter to provide the functionality for locating a file on disk. The aim is to have no filtering at all, so the user can see all the files in a directory. However, I have yet to workout the correct list of filter extensions to achieve this result on all operating systems (e.g. Windows 2008 R2, Windows 7, and Mac OS X.6). The current plugin is issuing the following command is: workspace.chooseFile("Choose file", new String[]{"*", "*.*"}, "Any file", ioArg == IOArg.OUTPUT); Therefore, the current filters are "*" and "*.*". Any suggestions appreciated. Anthony. -- -- ------------------------------------------------------------------------- Michael Anthony Smith, DeltaXML Ltd "Change control for XML" T: +44 1684 578751 E: anthony.smith(a)deltaxml.com http://www.deltaxml.com Registered in England 02528681 Reg. Office: Monsell House, WR8 0QN, UK

2 2

Help needed with XSLT
by Reaves, Timothy 24 Jun '11

24 Jun '11

I'm applying a transform to SVG documents, to make them validate against the SVG RNG schema. I have everything working EXCEPT the name spaces on the SVG element itself. These SVG documents where edited in Adobe Illistrator, and the original SVG element is: <svg xmlns="http://www.w3.org/2000/svg" xmlns:a=" http://ns.adobe.com/AdobeSVGViewerExtensions/3.0/" xmlns:graph=" http://ns.adobe.com/Graphs/1.0/" xmlns:i=" http://ns.adobe.com/AdobeIllustrator/10.0/" xmlns:x=" http://ns.adobe.com/Extensibility/1.0/" xmlns:xlink=" http://www.w3.org/1999/xlink"> and what I want is: <svg xmlns="http://www.w3.org/2000/svg" xmlns:xlink=" http://www.w3.org/1999/xlink"> The stylesheet starts: <xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xd="http://www.oxygenxml.com/ns/doc/xsl" xmlns:i="http://ns.adobe.com/AdobeIllustrator/10.0/" xmlns:a="http://ns.adobe.com/AdobeSVGViewerExtensions/3.0/" xmlns:graph="http://ns.adobe.com/Graphs/1.0/" xmlns:x="http://ns.adobe.com/Extensibility/1.0/" exclude-result-prefixes="xs xd a x graph" xpath-default-namespace="http://www.w3.org/2000/svg" version="2.0"> My understanding is that 'exclude-result-prefixes="xs xd a x graph"' should not copy over the namespaces identified, but a, x, and graph are still there in the output. My main template is below, and it keeps the namespace & extensions off of the child elements of SVG, just not the SVG node itself. <xsl:template match="@*|node()"> <xsl:choose> <xsl:when test=". = //i:pgf"/>  <xsl:when test=". = //@i:*" />  <xsl:when test=". = //metadata"/> <xsl:when test=". = //foreignObject"/> <xsl:when test=". = //switch">  <xsl:apply-templates select="node()"/> </xsl:when> <xsl:otherwise> <xsl:copy> <xsl:apply-templates select="@*|node()"/> </xsl:copy> </xsl:otherwise> </xsl:choose> </xsl:template> Any ideas?

4 6

Re: [oXygen-user] regression of oxygen 12.2: validation against rnc schema without .rnc extension on URL
by Tara Athan 20 Jun '11

20 Jun '11

I figured this out, quite by accident. "& in an href attribute must be escaped as &" This is an HTML rule, but apparently also applies to the href in your processing instruction, because when I tried my string with &, it works. *********************************** Before I updated to oXygen 12.2, I was able validate against a URL with a query string that generates an RNC schema ( the URL points to a PHP script that generates an RNC schema customized to the parameters in the query string). Now with the new <?xml-model?> tag, it does not recognize the URL, and gives an error message "SystemID: C:\Documents and Settings\All Users\Documents\RuleML\WP1\schema\tests\validation_on_URL_w_query_string\test_validation_on_URL_w_query_string.xml Main validation file: C:\Documents and Settings\All Users\Documents\RuleML\WP1\schema\tests\validation_on_URL_w_query_string\test_validation_on_URL_w_query_string.xml Engine name: oXygen Severity: error Description: There is no schema or DTD associated with the document. You can create an association either with the Associate Schema action or configuring in the Options the Preferences/Document Type Association list, or by creating a Validation Scenario. " I can (and you can too ;) manually verify that the URL is not broken, and does indeed point to an RNC schema. Also, when I use a redirect (on my server) that disguises this URL as a physical file with an .rnc extension, oXygen is able to validate against that. Below is the instance document that should validate. <?xml version="1.0" encoding="UTF-8"?> <?xml-model href="http://ruleml.org/0.91/relaxng/schema_rnc.php?backbone=x3f&default=x7&terms…" type="application/relax-ng-compact-syntax"?> <RuleML xmlns="http://www.ruleml.org/0.91/xsd"> <Assert> <Exists> <Var>X</Var> <And> <Atom> <oid> <Var>X</Var> </oid> <Rel>P</Rel> </Atom> </And> </Exists> </Assert> </RuleML> The URL redirect that does validate is "http://www.ruleml.org/0.91/relaxng/naffologeq_relaxed.rnc" Could you please modify this feature so that the explicit .rnc extension is not required? There is no need for it to be required, as the schema type is specified with the @type attribute. I would report this as an issue, but I can't find the issue tracker from your website. Tara

5 6

regression of oxygen 12.2: validation against rnc schema without .rnc extension on URL
by Tara Athan 17 Jun '11

17 Jun '11

Before I updated to oXygen 12.2, I was able validate against a URL with a query string that generates an RNC schema ( the URL points to a PHP script that generates an RNC schema customized to the parameters in the query string). Now with the new <?xml-model?> tag, it does not recognize the URL, and gives an error message "SystemID: C:\Documents and Settings\All Users\Documents\RuleML\WP1\schema\tests\validation_on_URL_w_query_string\test_validation_on_URL_w_query_string.xml Main validation file: C:\Documents and Settings\All Users\Documents\RuleML\WP1\schema\tests\validation_on_URL_w_query_string\test_validation_on_URL_w_query_string.xml Engine name: oXygen Severity: error Description: There is no schema or DTD associated with the document. You can create an association either with the Associate Schema action or configuring in the Options the Preferences/Document Type Association list, or by creating a Validation Scenario. " I can (and you can too ;) manually verify that the URL is not broken, and does indeed point to an RNC schema. Also, when I use a redirect (on my server) that disguises this URL as a physical file with an .rnc extension, oXygen is able to validate against that. Below is the instance document that should validate. <?xml version="1.0" encoding="UTF-8"?> <?xml-model href="http://ruleml.org/0.91/relaxng/schema_rnc.php?backbone=x3f&default=x7&terms…" type="application/relax-ng-compact-syntax"?> <RuleML xmlns="http://www.ruleml.org/0.91/xsd"> <Assert> <Exists> <Var>X</Var> <And> <Atom> <oid> <Var>X</Var> </oid> <Rel>P</Rel> </Atom> </And> </Exists> </Assert> </RuleML> The URL redirect that does validate is "http://www.ruleml.org/0.91/relaxng/naffologeq_relaxed.rnc" Could you please modify this feature so that the explicit .rnc extension is not required? There is no need for it to be required, as the schema type is specified with the @type attribute. I would report this as an issue, but I can't find the issue tracker from your website. Tara

1 0

Generating a schema's SCM
by Florent Georges 17 Jun '11

17 Jun '11

Hi, Is there any way to generate a schema's SCM from within oXygen? http://saxonica.com/documentation/schema-processing/scm.xml Regards, -- Florent Georges http://fgeorges.org/

4 6

Re: [oXygen-user] Open 2nd instance of Oxygen
by George Cristian Bina 16 Jun '11

16 Jun '11

Hi Karl, For the Windows executable you need to edit the oxygen.vmoptions file as explained in the user guide topic from my previous reply. But, if you do not need multiple instances all the time then I guess you can work as you described. Best Regards, George -- George Cristian Bina <oXygen/> XML Editor, Schema Editor and XSLT Editor/Debugger http://www.oxygenxml.com On 6/16/11 7:11 AM, Karl Stubsjoen wrote: > That works, I've made an edit to the Oxygen.bat. However typically I > am launching Oxygen with the Exe, as in: WINDOWS | START | TYPE > "oxyg" | CLICK on Oxygen Icon > > So, I suppose when I need a 2nd instance I'll just go find Oxygen.bat > > Karl.. > > On Wed, Jun 15, 2011 at 8:57 PM, George Cristian Bina > <george(a)oxygenxml.com> wrote: >> Hi Karl, >> >> You need to set a system property in the startup script with a command line >> parameter like below: >> >> -Dcom.oxygenxml.MultipleInstances=true >> >> How you do that depends on how you start oXygen. We have a description on >> how to do this for different platforms in the user guide: >> http://www.oxygenxml.com/doc/ug-oxygen/index.html?q=/doc/ug-oxygen/topics/s… >> >> Best Regards, >> George >> -- >> George Cristian Bina >> <oXygen/> XML Editor, Schema Editor and XSLT Editor/Debugger >> http://www.oxygenxml.com >> >> On 6/16/11 2:58 AM, Karl Stubsjoen wrote: >>> >>> I've done it before, but not sure how. So how do you open a 2nd >>> instance of Oxygen? >>> >> > > >

1 0