- oXygen-user - www.oxygenxml.com

Re: [oXygen-user] Signed executables in Oxygen
by Vadim Peretokin 19 Mar '14

19 Mar '14

Right, but it is still not theirs. It is third-party software (at least hunspell). Note that I'm not familiar on the proper mechanics of signing software, just raising a point that this seems dodgy.

1 0

oXygen Users Meetup Prague 2014 - Recordings Available
by Mihai Ionescu 19 Mar '14

19 Mar '14

Hello, If you missed or just want to watch again the oXygen Users Meetup presentations, here you can find the event recordings: http://www.oxygenxml.com/events/2014/oXygen-user-meetup-Prague.html Best regards, Mihai -- Mihai Ionescu <oXygen/> XML Editor, Schema Editor and XSLT Editor/Debugger http://www.oxygenxml.com

3 2

vmoptions reset after oom-exception
by ingo.mattei 18 Mar '14

18 Mar '14

dear list, it seems that after an outofmemory-exception the vmoptions for oxygen (15.2) are reset. Additionally, due to user restrictions I cannot set the vmoptions by myself. how can this be avoided? thanks im

3 3

Lobbying for a new feature to save on indentation
by G. Ken Holman 14 Mar '14

14 Mar '14

Fellow oXygen users, I've just learned that a request for a new feature I made long ago is getting stale because not enough people have expressed an interest in having it added to the software. Perhaps this is because people haven't considered how helpful it might be, so I thought I would lobby here that if you like the idea of this feature you might vote for it as well. In all my SGML and XML editing it has been my preference to keep children of the document element un-indented and flush left, starting the indentation only with the grandchildren of the document element. I see no utility in indenting the children of the document element since it is unambiguous if an element at the left edge is a document element or not: if there is element or text content before the start tag or after the end tag, then the element must not be the document element. It may not sound like saving one indent is a lot, but consider the file size since that one indent is saved on *every* line. Also, it saves one indent for those of our files (in particular the XSL-FO files I review by eye to debug) are indented way over to the wrap position. The software currently indents children of the document element using the preference for indent width ... I suggest a new preference checkbox (by default set one way or the other to preserve existing behaviour), where the user can indicate the preference such that indentation starts with descendants of children of the document element, thus putting those children of the document element at column 1 of the line. I'll let the software designers decide what wording to use and whether the box is checked or not as the default to preserve existing behaviour. Please send your interest to <support(a)oxygenxml.com> rather than to this mail list, so that it gets properly recorded and doesn't clog up threads here. Thanks for listening! . . . . . . . . . Ken -- Public XSLT, XSL-FO, UBL & code list classes: Melbourne, AU May 2014 | Contact us for world-wide XML consulting and instructor-led training | Free 5-hour lecture: http://www.CraneSoftwrights.com/links/udemy.htm | Crane Softwrights Ltd. http://www.CraneSoftwrights.com/m/ | G. Ken Holman mailto:gkholman@CraneSoftwrights.com | Google+ profile: http://plus.google.com/+GKenHolman-Crane/about | Legal business disclaimers: http://www.CraneSoftwrights.com/legal | --- This email is free from viruses and malware because avast! Antivirus protection is active. http://www.avast.com

4 3

Do format-and-indent for a set of files?
by Eliot Kimber 13 Mar '14

13 Mar '14

So for my DITA RNG @domains update process I have: 1. Apply my XQuery to do the update of each doc 2. Do a global search and replace of "
" to "\n" 3. For each document, apply format-and-indent to make everything neat. 1 and 2 I can quickly do from the project view against all the RNG files by setting up a logical folder to hold the files. But there doesn't appear to be a way to do 3 against files in the project view. Is this possible? Thanks, Eliot ————— Eliot Kimber, Owner Contrext, LLC http://contrext.com

2 2

SurroundWithFragmentOperation duplicates selected string
by Andreas Wagner 13 Mar '14

13 Mar '14

Hi list, In my oXygen Author mode framework, I want to offer an action to replace an abbreviation with its expanded form. To give a concrete example of one of our (TEI) files. Suppose I have a word like "accusatu." I select it, trigger my action, get asked what it should be replaced with and get (in code) this: <choice><abbr>accusa.</abbr><expan>accusatus</expan></choice> The thing is, when the selected string contains a character entity, say, "Jtẽ", then the surrounding works okay, but the selected phrase is *repeated after* the inserted fragment, so that I get <choice><abbr>Jtẽ</abbr><expan>Item</expan></choice>Jtẽ This sometimes happens and sometimes it does not. With <choice><abbr>intẽtiõis</abbr><expan>intentionis</expan></choice> it has just worked fine. Note that for directly entered chars like nõ -> non, I have never noticed this problem, only when I am using numeric character references. Then again, it's not clear to me which cases are problematic and if they are so always or not. (I think with the Item from the example above it happens always.) But I don't know what distinguishes this case from the second example. (Also, from time to time I get errors because "The current context is read-only", which also seems to relate to the NCR entities involved and to how (far) I draw my selection.) The xml fragment that the SurroundWithFragmentOperation is using is this: <choice xmlns="http://www.tei-c.org/ns/1.0"><abbr></abbr><expan>${ask('Wie lautet die Expansion?', generic)}</expan></choice> Has anyone experienced similar things or can help in some way? Best, Andreas -- Dr. Andreas Wagner Project "The School of Salamanca" Academy of Sciences and Literature, Mainz and Institute of Philosophy Goethe University Frankfurt http://salamanca.adwmainz.de Grüneburgplatz 1 (Pf 116, R. 2.455) 60629 Frankfurt am Main Tel. +49 (0)69/798-32774 Fax +49 (0)69/798-32794

2 1

Possible to use XQuery Update to Update attribute values and get literal newlines?
by Eliot Kimber 13 Mar '14

13 Mar '14

I'm pretty sure the answer is "no", but I'm wondering if there's any way to use XQuery update via Saxon to update an attribute value such that the resulting value has literal newline characters in it. In the context of the DITA 1.3 RNG stuff, I've written a little XQuery transform that updates the default value of the @domains attribute as declared in a document type shell's grammar doc. The value of the a:defaultValue attribute as I've coded it is formatted like so: <attribute name="domains" a:defaultValue=" (topic topic) (topic hazard-d) (topic hi-d) (topic indexing-d) (topic ut-d) (topic hazard-d) a(props deliveryTarget) "/> Which is consistent with the general DITA coding practice of putting each thing on its own line for each of updating and so on. However, the XQuery update will not emit literal newlines using any method I've tried. This is consistent with the fact that newlines in XML attributes are treated as space characters when the XML is parsed. That is, if I do: let $domains := string-join(local:getDomainsContributions($e), '
') Then what I get in the updated document is: a:defaultValue="(topic abbrev-d) 
(topic equation-d) 
(topic hazard-d) 
(topic hi-d) 
(topic indexing-d) 
(topic mathml-d) 
(topic pr-d) 
(topic relmgmt-d)" Which is technically correct per the XML spec but not what I wanted. Is there any solution here other than simply doing a global search and replace on 
 (which is OK but not as automatic as I had hoped I could do). Thanks, Eliot ————— Eliot Kimber, Owner Contrext, LLC http://contrext.com

1 0

XProc: Show in results view as XHTML
by Jostein Austvik Jacobsen 13 Mar '14

13 Mar '14

For XSLT scenarios it's possible to render XHTML in the results view. There's no option to do that for XProc scenarios. It would be great if such an option were available. Jostein

2 2

Re: [oXygen-user] Cannot get the excluded topics/text to grey out when profiling attributes are applied
by Nathan 10 Mar '14

10 Mar '14

Hi Radu, The problem I am having is "after" I set the profiling attributes using ditaval and selecting the profiling condition set using drop down filter. The greying out action never happens on mac, but it works fine on windows. Please find below the attached images in windows and in mac which show how greying works in windows but not mac. Regards, Nathan

2 2

Cannot get the excluded topics/text to grey out when profiling attributes are applied
by Nathan 07 Mar '14

07 Mar '14

Hi, I am using the DITA framework in Oxygen Author 15.2 on Mac OS and am unable to get the excluded topics greyed out when profiling attributes have been applied. The profiling attributes are being distributed as part of a custom config file. They are being declared in ditaval files which are bundled along with the framework folder. The framework folder is being distributed via source control. I am able to apply see the attributes and apply them on the concerned dita topics and text, but when I select the "Show Profiling attributes" icon on the DITA Maps manager, the excluded topics and text are not being grayed. Also, when I open the "Open Map in editor with resolved topics" icon in the Dita Maps manager window, the excluded topic is still shown as part of the content. I only notice this issue on the Mac, not on Windows or Linux. Is this a known bug in Oxygen 15.2? Could someone help me figure out whats happening here? Thanks a bunch, Nathan

2 1