- oXygen-user - www.oxygenxml.com

Re: [dita-users] All possible Xpath generator?
by Hedley Finger 13 Feb '08

13 Feb '08

Dan: >At Wednesday, 13/02/2008, 12:16 PM;, Dan wrote: >your post is a bit confusing, and some better details/explanations >would be nice to see. What do you mean by "write a list of all >possible absolute Xpaths to a text file." Rephrasing my original request: I am developing a CSS implementation for [instance documents that conform to] an XML schema. It would really help to check if all [required CSS class matches] have been covered if I could find a utility that would scan a DTD (including *.mod inclusions) or XML Schema to write a list of all absolute -- not including wildcards -- [Xpaths from the root element to each possible leaf element] ... to a text file. For example, using a possible path from a DITA DTD: /reference/refbody/section/p This would help determine what class definitions can be generic no matter in what context an element apppears (e.g. ) and what may need different treatment depending on context (e.g. */section/title). Oh, and if the generator could list the Xpath in reverse, from leaf node to root, as well that would be pleasant: p\section\refbody\reference\ Then I could sort the list of paths so that all instances where was a leaf would be together and I could decide which contexts could share a CSS class and which would need context-specific classes. I've tried using the <oXygen/> instance generator on the DITA task.xsd, but even limiting recursion depth and number of repetitions, it produces very large files, possibly not completing in my lifetime. And then there is the problem of extracting the Xpaths. Hope that makes it clearer, Hedley -- Hedley Stewart Finger 28 Regent Street Camberwell VIC 3124 Australia Tel. +61 3 9809 1229 Mobile +61 412 461 558, E-mail <mailto:hfinger@handholding.com.au>

1 0

All possible Xpath generator?
by Hedley Finger 13 Feb '08

13 Feb '08

XML/Xpath/CSS heavy hitters: I am developing a CSS implementation for an XML schema. It would really help to check if all possibilities have been covered if I could find a utility that would scan a DTD (including *.mod inclusions) or XML Schema to write a list of all possible absolute Xpaths to a text file. This would help determine what class definitions can be generic no matter in what context an element apppears (e.g. ) and what may need different treatment depending on context (e.g. */section/title). Oh, and if the generator could list the Xpath in reverse, from leaf node to root, as well that would be pleasant: p/section/refbody/reference. Trawling through the Help for <oXygen/> 9.1 didn't give any joy, likewise Google. Regards, Hedley -- Hedley Stewart Finger 28 Regent Street Camberwell VIC 3124 Australia Tel. +61 3 9809 1229 Mobile +61 412 461 558, E-mail <mailto:hfinger@handholding.com.au>

1 0

CSS alternatives?
by Wendell Piez 11 Feb '08

11 Feb '08

Hi, Not exactly a bug, but a glitch. When xml-stylesheet PIs are being used, "CSS Alternatives" appears not to work unless the CSS files are provided with title pseudo-attributes in their respective PIs. I guess this is not unreasonable, if you need a label for the pull-down menu. But the "Associate XSLT/CSS Stylesheet" dialog box doesn't offer a place to enter a title; it has to be done by hand. Maybe: (1) the dialog box should offer a field for a CSS title, and possibly (2) if one isn't given, the CSS Alternatives pull-down should fall back to the stylesheet href? What do you think? Cheers, Wendell ====================================================================== Wendell Piez mailto:wapiez@mulberrytech.com Mulberry Technologies, Inc. http://www.mulberrytech.com 17 West Jefferson Street Direct Phone: 301/315-9635 Suite 207 Phone: 301/315-9631 Rockville, MD 20850 Fax: 301/315-8285 ---------------------------------------------------------------------- Mulberry Technologies: A Consultancy Specializing in SGML and XML ======================================================================

3 8

Reporting of Imported/Included XSLT Component in Error Messages
by Eliot Kimber 07 Feb '08

07 Feb '08

I have a complext XSLT made up of many parts. In running it from inside Oxygen using Saxon 9, I was getting an error message but the message was reported against a line number in the top-level style sheet. When I run the same script outside Oxygen the error messages is associated with the correct component file (not the top-level). Is this a limitation in Oxygen's integration with Saxon or a bug? The message in this case was a run-time error reporting that a template's parameter was not set by the caller and the default was not consistent with the declared data type of the parameter. Thanks, Eliot -- Eliot Kimber Senior Solutions Architect "Bringing Strategy, Content, and Technology Together" Main: 610.631.6770 www.reallysi.com www.rsuitecms.com

2 2

XSD, catalog and PUBLIC IDs
by Theun Fleer 01 Feb '08

01 Feb '08

3 3

Re: [oXygen-user] Big Graphic Causes "Restart with more memory" Loop
by Radu Coravu 30 Jan '08

30 Jan '08

Hi Eliot, The image is actually 9350 X 10288 pixels with 24 bits of depth. Expanded in memory this should occupy at least 288 MBytes (9350 x 10288 x 3 bytes). We opened it with a regular image viewer and this is actually the amount it actually needed to display the image. So Oxygen would need at least 400 MBs for the same image (300 for the image and 100 for the editor itself). Scaling the picture is not actually an easy task to do because the image needs to be loaded fully in memory before scaling it. Regards, Radu -- Radu Coravu <oXygen/> XML Editor, Schema Editor and XSLT Editor/Debugger http://www.oxygenxml.com Eliot Kimber wrote: > The image is attached. > > It was created from Visio using "printer" resolution of 1200x1200, not > sure what the color depth is (probably 24bit). > > Cheers, > > Eliot >

2 1

Big Graphic Causes "Restart with more memory" Loop
by Eliot Kimber 30 Jan '08

30 Jan '08

I was editing a document of normal size (100K) in Author mode. When I created a reference to a 2.4Meg JPG it got into what appeared to be an infinite loop of "Restart with more memory" messages, in that each time I clicked OK or cancel on the dialog another one popped up. I eventually killed the app. This is definitely a case that needs to be trapped and either the graphic not shown or downsampled to a displayable size. Cheers, Eliot -- Eliot Kimber Senior Solutions Architect "Bringing Strategy, Content, and Technology Together" Main: 610.631.6770 www.reallysi.com www.rsuitecms.com

2 3

Re: [oXygen-user] SynchroSVN unable to connect to repository - error Malformed Network Data
by Sorin Ristache 29 Jan '08

29 Jan '08

Thank you for letting us know about the solution. Regards, Sorin Jeff Gaer wrote: > Thanks Sorin, > > That was it, I had added a ulimit statment and apparently it prints out > a return code. Its working fine now. I appreciate the rapid response, > its a great tool and I was really missing it. > > On Fri, 2008-01-25 at 15:30 +0200, Sorin Ristache wrote: >> Hello, >> >> Do you try to connect with the svn+ssh protocol? If yes the error svn: >> Malformed Network Data is caused usually by a shell script that is >> executed automatically in your account on the server when you login and >> that displays text to output console. When the text output is received >> by a client application that connects to the server by SSH that text >> violates the SVN protocol. Please make sure that this script does not >> send text to the output, that is the script does not display any text >> when you login to your account on the server with a normal SSH client >> where you type the commands and see the result in a text console. You >> should rename or remove the shell script to make sure the script sends >> no output text and try again to connct to the SVN repository with Syncro >> SVN Client. The script can be called .cshrc or .bashrc and is located in >> your home folder on the server. >> >> >> Regards, >> Sorin >> >> >> Jeff Gaer wrote: >>> I can open a repository connection and see the url appear in the >>> repository pane, but can no longer browse the repository or commit. The >>> error I get is malformed network data. There is no other useful >>> information that I can find. >>> >>> we are running svn 1.4.4 on linux 4 using java 1.6.0.3_02 >>> >>> I have the problem both with the 2.6 and 3.0 versions of synchro >>> >>> Jeff Gaer

1 0

Rename Element Does Not Trigger Format Update
by Eliot Kimber 28 Jan '08

28 Jan '08

In Author mode, if I do a "rename element" action on an element with specific formatting to an element with different formatting, the formatting is not updated to reflect the new element type. For example, in a DITA doc, changing to <cite> the text is still shown as bold. If I go to text mode and come back to author mode the formatting is of course reflected correctly. Cheers, E. -- Eliot Kimber Senior Solutions Architect "Bringing Strategy, Content, and Technology Together" Main: 610.631.6770 www.reallysi.com www.rsuitecms.com

2 1

Re: [oXygen-user] Strange Results from XSD Documentation Generator
by Sorin Ristache 25 Jan '08

25 Jan '08

Thank you for the files. I logged the two bugs in our internal system for a future version of oXygen. Regards, Sorin Eliot Kimber wrote: > Sorin Ristache wrote: >> Hello, >> >> Please provide the XSD file. It looks like a bug in the code for >> generating the schema documentation. > > Failing XSD is attached. > > If you go to the entry for frb_publication you should see that most of > the boxes in the model picture are not working links, but "index" is. > > If you go to something like "p" you'll see that all the links from the > model picture are good but all the links from the instance > representation and XSD markup are like this: > > <div style="margin-left: 1.5em"><xsd:element > ref=" class="scContent"> > <a title=""q" element declaration > could not be found." href="javascript:void(0)" > onclick="alert('"q" element > declaration could not be found.');">q</a> > "/></div> > > The XSD is generated from a local DITA specialization shell using the > NekoDTD parser.

2 3