- oXygen-user - www.oxygenxml.com

different results using TRANG directly and from within oXygen
by Theun Fleer 03 Jun '08

03 Jun '08

2 9

Feature Request: Control-click type and ref attribute values in xsd editor to jump around the schema
by Andrew Welch 03 Jun '08

03 Jun '08

Hi, Would it be possible to make type and ref attributes in the xsd editor clickable so that control clicking them jumps to their targets? For example: 1. <xs:element name="foo" type="foo"/> 2. 3. <xs:complexType name="foo"> 4. <xs:sequence> 5. <xs:element ref="foo"/> Clicking type="foo" at 1. jumps to line 3, and clicking ref="foo" at line 5. jumps back to line 1. I know you can do this currently using the diagram view, but it would be really useful if you could do it directly from within the editor. thanks -- Andrew Welch http://andrewjwelch.com Kernow: http://kernowforsaxon.sf.net/

2 2

Map Editor Should Remember Last Directory Used for Topicrefs
by Eliot Kimber 03 Jun '08

03 Jun '08

I noticed that if I use the map editor to create a topic ref, then go to a different file (in my case, a DTD declaration module) then create another topicref, the remembered directory is the directory containing the file I just edited, not the last directory I used to create a topic ref. I think it's the likely case that authors will be linking to topics in the last directory they linked from. Would be convenient if the map editor remembered this directory. Cheers, Eliot -- Eliot Kimber Senior Solutions Architect "Bringing Strategy, Content, and Technology Together" Main: 610.631.6770 www.reallysi.com www.rsuitecms.com

4 6

<oXygen/> as diff tool for TortoiseSVN
by Hedley Finger 03 Jun '08

03 Jun '08

I want to use TortoiseSVN as the poor man's CMS for my XML project (based on DITA DTDs). The built-in diff-merge is line oriented, as are many other diff tools intended for programmers. This can lead to excessive flagging of differences in XML files which, by XML conventions for white space, linebreaks, attribute order, etc. are perfectly identical. Has anybody successfully used <oXygen/> as an XML diff-merge tool with TortoiseSVN or any other programming version management programme? How do you set TortoiseSVN up to invoke <oXygen/> and pass filename parameters, etc.? Any help received will earn my undying and pathetic gratitude! Regards, Hedley P.S. Posted to dita-users, oxygen-user, "TortoiseSVN Users" -- Hedley Finger 28 Regent Street Camberwell VIC 3124 Australia Tel. +61 3 9809 1229 Fax. (call phone first) Mob. (cell) +61 412 461 558 Email. "Hedley Finger" <hfinger(a)handholding.com.au>

1 1

help with oxygen 9.2
by Juan York 29 May '08

29 May '08

I've recently upgraded from Oxygen 9.1 to Oxygen 9.2 Performing this upgrade seems to have broken my xslt transformations. I have a project which is an extension of docbook 5.0 the custom xslt style sheet that I created imports the docbook.xsl which is located in frameworks. In 9.1 everything worked as expected. The basic layout was <xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:fo="http://www.w3.org/1999/XSL/Format" version="1.0"> <xsl:import href="http://docbook.sourceforge.net/release/xsl/current/html/docbook.xsl "/> <xsl:variable name="root.elements" select="' systemfeature scenario appendix article bibliography book systemfeature colophon dedication glossary index part preface qandaset refentry reference sect1 systemfeature set setindex '"/> <xsl:template match="systemfeature"> <xsl:apply-templates/> </xsl:template> </xsl:stylesheet> And the stylesheet would match the systemfeature element and apply the proper templates to any docbook tags contained within it. Within 9.2 the import statement seems to "stop" the process, I cannot match any elements after I have imported. If there's anyone who can help with this issue it would be much appreciated. thanks Juan

2 2

Unchecking "Use default catalog" Does Not Stop Framework's Catalog From Being Used
by Eliot Kimber 28 May '08

28 May '08

I'm trying to use Oxygen to test documents against a set of DTDs as organized for distribution to a client. These are DITA specializations that use the draft DITA 1.2 declarations, so I don't want the DITA 1.1 declarations to be involved at all. Unfortunately, it appears that Oxygen is including the DITA OT catalog from the frameworks directory even though I have "use default catalog" unchecked in my catalog options and only have my distribution-specific catalog included in the list of user-specified catalogs. Examining the catalog resolution trace I can see that references to the standard DITA declaration sets are resolving to the framework location. Is my expectation of how "use default catalog" should work correct or is there another way to disable use of the framework catalogs? Thanks, Eliot -- Eliot Kimber Senior Solutions Architect "Bringing Strategy, Content, and Technology Together" Main: 610.631.6770 www.reallysi.com www.rsuitecms.com

2 1

Oxygen 9.2 - Howto disable "DITA Maps Manager"?
by Jan Nylund 26 May '08

26 May '08

Hello! Is there a way to disable the "DITA Maps Manager" to get files with extension .ditamap opened directly into the editor view? Br, Jan -- Jan Nylund System Designer Citec Information Oy Ab

2 3

very slow response when switching back to oXygen
by Seraphim Larsen 23 May '08

23 May '08

Hi all, I'm a pretty new oXygen user (new since version 9.1). Really love the tool! But one thing that is really annoying is that if I leave oXygen for awhile (say, 20 minutes), and then come back to it, it usually takes at least 20-30 seconds before it starts responding, and it can sometimes take several minutes. I guess it's some kind of memory paging issue or something. This sometimes happens with other programs too, but it's much worse with oXygen than with any other program that I use. Is there something I can do to configure oXygen to get rid of this problem? I'm running oXygen 9.2 on Windows XP. Thanks, Seraphim

2 1

Setting up and configuring the Idiom FO Plugin in 9.2
by Eliot Kimber 23 May '08

23 May '08

Using 9.2 I tried to use the Idiom plugin to generate PDF. I had not done anything to the built-in framework. The transform scenario panel indicated that XEP was detected, but when I ran it I got a failure saying that it couldn't find xep/lib in /Applications/DITA-OT1.4.1 (this is on OS X). I did not have an /Applications/DITA-OT1.4.1 directory on my machine (although I had in the past). I did a search within the framework for "DITA-OT1.4.1" and couldn't find it. I then tried copying a working copy of xep from another Toolkit instance I had lying about into the framework's fo/lib directory, but no change. Finally, I created the directory it was looking for and put xep there and the PDF generation worked. Clearly there's something odd on my machine that is causing this problem but I have no idea what it might be. I'm afraid I found the online help for setting up the Idiom plugin a bit confusing (although I find the plugin itself a bit confusing). I didn't see any configuration settings that would have been pointing at DITA-OT1.4.1. Is it possible this is actually a bug in the plugin as distributed that was simply masked by the fact that the target directory exists on the machine(s) used to test Oxygen? I would have never noticed the problem if I had kept my 1.4.1 Toolkit around. Thanks, Eliot -- Eliot Kimber Senior Solutions Architect "Bringing Strategy, Content, and Technology Together" Main: 610.631.6770 www.reallysi.com www.rsuitecms.com

2 1

Feature Request: Collapse All/Expand All/Expand One Level in DITA Map View
by Eliot Kimber 23 May '08

23 May '08

One of the really nice features of Arbortext Editor is the way you can control the expansion in their tree viewer: expand/collapse all or expand one level (they also implement a triple click that does the expand one level). For example, given a fully-expanded map, selecting the map element and doing "expand one level" would collapse all the children of the map so you only see the direct child topicrefs/topicheads. This is especially handy for very long maps. For example, I'm doing a lot of DTD documentation where I have the reference entries grouped by letter and there might be 150 or 200 separate entries under 20 or more groups. It can take a while for the map to populate all the navigation titles when I first open it, but if it was initially collapsed, it would populate the letter groups pretty fast. It would be really nice if this could be set as the default expansion for opening maps. I'm not sure if it would be practical to remember the expansion state of the map on save, probably not, but that would be handy too. Cheers, Eliot -- Eliot Kimber Senior Solutions Architect "Bringing Strategy, Content, and Technology Together" Main: 610.631.6770 www.reallysi.com www.rsuitecms.com

2 3

Feature Request: Groovy Language Support
by Eliot Kimber 21 May '08

21 May '08

It would be cool if Oxygen could provide at a minimum syntax highlighting for Groovy language programs. Not a high-priority feature, probably but I've started using Groovy for doing scripting against Java APIs (I would probably use Jython myself but it wasn't my choice to make). Cheers, Eliot -- Eliot Kimber Senior Solutions Architect "Bringing Strategy, Content, and Technology Together" Main: 610.631.6770 www.reallysi.com www.rsuitecms.com

2 1

More Java memory errors with oXygen 9.2
by Jacques Foucry 19 May '08

19 May '08

Hello, Using oXygen for a long time under Mac OS X, the new version (9.2) have more memory errors than previous version. It look like a memory leak. Since this version I pai really attention to the number of open file. But with only two open files but a lot opened and closed before, the memory error appears about every 3 hours of work. I know that I could change the memory allowed to oXygen, but the bug appears too. After more work but it appears. Did somebody else notice this issue ? Best Regards, Jacques

4 4

QNames as attribute values in RNC
by Paul Hermans 19 May '08

19 May '08

If I have [code] element creator { (attribute scheme {"overheid:A"}, ("a" | "b" | "c" )) | (attribute scheme {"overheid:B"}, ("d" | "e" | "f" )) } [/code] Oxygen 9.2 acts as expected. After choosing an attribute value for attribute scheme, I do get the correct list of allowed values. "a", "b", "c", if attribute value is overheid:A. ---------------------------------------------- If the datatype is changed to a *QName* [code] element creator { (attribute scheme {xsd:QName "overheid:A"}, ("a" | "b" | "c" )) | (attribute scheme {xsd:QName "overheid:B"}, ("d" | "e" | "f" )) } [/code] whatever attribute value has been chosen, Oxygen 9.2 offers the full value list ("a", "b", "c", "d", "e", "f"). Paul

2 1

Feature Request: Combo List of Common non-ASCII Characters
by Eliot Kimber 16 May '08

16 May '08

I find myself needing to insert non-ASCII characters like em-dash and whatnot which is not really convenient to do in Author mode (in text mode I just type the numeric character reference) [while I work on a Mac, I usually use a Windows keyboard so the magic Mac keystrokes for inserting special characters are not available (as far as I know). Anyway, it would be nice to have a configurable pulldown on the tool bar that can be loaded with some number of characters for quick insertion. Would also be handy for authoring equations and whatnot. Cheers, Eliot -- Eliot Kimber Senior Solutions Architect "Bringing Strategy, Content, and Technology Together" Main: 610.631.6770 www.reallysi.com www.rsuitecms.com

2 1

Feature Request: Drag Tabs to Project and DITA Map Views
by Eliot Kimber 16 May '08

16 May '08

I find myself wanting to grab tabs for open files and drag them into either the project view or dita map view in order to add them to the respective view. For the project, just add to the project. For DITA maps, create topicref to the file. That would make it easy to create a new file and then add it to map without having to go through the "add topicref" process. Cheers, Eliot -- Eliot Kimber Senior Solutions Architect "Bringing Strategy, Content, and Technology Together" Main: 610.631.6770 www.reallysi.com www.rsuitecms.com

2 1

XInclude warnings in version 9.2
by Cody Fauser 16 May '08

16 May '08

I just updated to version 9.2 build 2008050821. I have many XInclude tags in by Docbook document that include plain text code samples like the following: <programlisting><xi:include href='../code/output/actionmailer/generator_example.txt' parse='text' xmlns:xi='http://www.w3.org/2001/XInclude'/></programlisting> With the new version I'm receiving a large red warning in the author view like: Error parsing external reference: file:/Users/cody/writing/oreilly/book/code/output/actionmailer/generator_example.txt. Cause: The replacement of an 'include' element appearing as the document element in the top-level source infoset cannot contain characters. Is there any way to prevent this behavior? It is very visually distracting and fills some pages of my document almost entirely with the red warnings. -- Cody Fauser http://shopify.com - e-commerce done right http://www.codyfauser.com - blog http://peepcode.com/products/activemerchant-pdf - ActiveMerchant PeepCode http://www.oreilly.com/catalog/rjsrails - RJS Templates for Rails

3 4

Map Editor: New Topicrefs Have Scope="peer"
by Eliot Kimber 15 May '08

15 May '08

I have been using the map editor by creating topicrefs to non-existent topics and then using the "topic doesn't exist, create new?" feature to create the referenced topic. The one problem I'm finding is that when I create the topicref, after I specify the URL of the target topic, the dialog sets the scope= value to "peer", which I then have to change to "local" so the reference will be correct. The URL I'm specifying is relative to the location of the map document, so the dialog should be able to tell that the target, while it doesn't exist, will be below the map's location (I can't think of any other way it would presume to guess whether a referenced topic is local or a peer). Alternatively, it should always take any relative path to be a local reference and any absolute path to be a peer path. Cheers, Eliot -- Eliot Kimber Senior Solutions Architect "Bringing Strategy, Content, and Technology Together" Main: 610.631.6770 www.reallysi.com www.rsuitecms.com

2 2

Re: [oXygen-user] v 9.2 acting flaky
by George Cristian Bina 14 May '08

14 May '08

Hi Rob, This behavior is configurable through a Java system property passed in the command line. You need to edit the oxygen.sh script to specify multiple instances to false, see also the comment in the oxygen.sh script about that: # Set multiple instances to false if you want to have a single running instance of Oxygen when # repeatedly starting oxygen.sh. In this way you can open files by typing: # oxygen.sh File.xml # The files will be opened in the first editor instance, will not create other processes. # java -Xss512k -Xmx256m\ "-Dcom.oxygenxml.editor.plugins.dir=$OXYGEN_HOME/plugins"\ -Dcom.oxygenxml.MultipleInstances=true\ -cp "$CP" ro.sync.exml.Oxygen "$@" If you use the executable to open oXygen then you need to make sure the multiple instances is not set to true in the oxygen.vmoptions file. Best Regards, George -- George Cristian Bina <oXygen/> XML Editor, Schema Editor and XSLT Editor/Debugger http://www.oxygenxml.com Robert Koberg wrote: > On Fri, 2008-05-09 at 20:00 +0300, George Cristian Bina wrote: >> Hi Robert, >> >> We will try to reproduce the installation issue following the steps you >> described. >> Can you try also running with the oxygen.sh script to get the default >> Java rather than the one that comes with oXygen, to see if the slow down >> is caused by the JVM? > > So far so good starting with the shell script. Everything is fast and I > have not seen any problems. > > One issue: I set the ubuntu file manager (Nautilus) for XML/XSL/etc to > 'Open With' the shell script. But this causes a new instance of oXygen > for each file opened. Is there an option I can use to to have the files > open in the existing oxygen instance? > > >> Thanks, >> George >> -- >> George Cristian Bina >> <oXygen/> XML Editor, Schema Editor and XSLT Editor/Debugger >> http://www.oxygenxml.com >> >> >> Robert Koberg wrote: >>> I deleted the default /opt/Oxygen9 install and installed it under my >>> home folder and so far I have not lost the ability to use my keyboard >>> (yes, I lost all keying ability in oxygen, every other open app worked >>> fine). >>> >>> I originally installed with sudo: >>> >>> $ sudo sh ./oxygen.sh >>> >>> I let it install to the default (/opt/Oxygen9). I de-selected the >>> options for TEI, DITA and docbook in the installer. It failed to create >>> the shortcut for my desktop. >>> >>> When closing oxygen, I got errors saying it could not write to the >>> oxygen tmp dir for (if I remember correctly) dita, tei and docbook. >>> >>> Everything seems to be working fine now after I installed under my home >>> folder (which I think should be the default anyway). But, working in >>> oxygen seems much slower than before I upgraded. I have restarted my >>> machine - it has 2 gigs of memory and dual 1.66 processors. (I don't >>> have any swap space in use) >>> >>> I am using Ubuntu 8.04 with the default Compiz and the Appearance >>> preference set to the Normal option. >>> >>> >>> >>> On Fri, 2008-05-09 at 19:01 +0300, George Cristian Bina wrote: >>>> Hi Rob, >>>> >>>> Can you try starting oXygen with the startup script: >>>> >>>> sh oxygen.sh >>>> >>>> That should use the default Java installation from your machine. >>>> Let us know if you still have issues. >>>> >>>> Best Regards, >>>> George >>>> -- >>>> George Cristian Bina >>>> <oXygen/> XML Editor, Schema Editor and XSLT Editor/Debugger >>>> http://www.oxygenxml.com >>>> >>>> >>>> Robert Koberg wrote: >>>>> Hi, >>>>> >>>>> Is it just me or is version 9.2 acting strangely? I keep losing the >>>>> ability to use the keyboard for things like cut and paste. >>>>> >>>>> I am on Ubuntu Gutsy Gibbon (8.x with the latest updates). I have java >>>>> 1.6.05 installed. I noticed in the install that oxygen cam bundled with >>>>> this JVM as well(??). >>>>> >>>>> rkoberg:$ java -version >>>>> java version "1.6.0_05" >>>>> Java(TM) SE Runtime Environment (build 1.6.0_05-b13) >>>>> Java HotSpot(TM) Server VM (build 10.0-b19, mixed mode) >>>>> >>>>> thanks, >>>>> -Rob >>>>> >>>>> _______________________________________________ >>>>> oXygen-user mailing list >>>>> oXygen-user(a)oxygenxml.com >>>>> http://www.oxygenxml.com/mailman/listinfo/oxygen-user >

3 2

SVN commit dialog issue
by Timothy Reaves 12 May '08

12 May '08

In the svn compoent, the commit dialog shouldn't be modal. I'm tired of needed to cancel out of a commit because I want to diff one of the files in the commit to see what has changed in that file. I'm having to open MacVim and create all of my comments there, and then copy/paste those into the commit dialog, which is also inconvenient. Thanks.

2 2

Shortcut Problem
by Philipp Steinkrüger 12 May '08

12 May '08

Dear Oxy-users, I am currently trying to learn how to do DocType Associations and I experienced two problems, a minor and a major one. Heres the minor problem: I created a new button to insert a <lb/> element. Inserting works fine, i.e. after clicking the button, a <lb/> appears in the code. But in author mode, i guess because <lb/ > is defined as a block element (to actually make the linebreak appear) it is shown as <lb></lb> and the cursor in placed inside the <lb></lb> after inserting it. So if the editor continues to write, he fills the <lb> which is of course not allowed by the schema. What I would like to do is to position the cursor behind the element after inserting it. is that possible? The major problem concerns shortcuts: i defined a shortcut for the button, but it just doesn't work. Thats also true for predefined buttons, not only for my newly created ones. I tried to use the TEI Doctype and no shortcut works. I have no idea how to approach this problem. What could I do? Thanks! Philipp PS: It's Oxygen Standalone 9.1 for Windows, btw... -- Philipp Steinkrüger M.A. Thomas-Institut der Universität zu Köln Universitätsstraße 22 50923 Köln +49 221 4702394 philipp.steinkrueger(a)uni-koeln.de http://www.thomasinstitut.uni-koeln.de http://www.philosophie.uni-koeln.de http://www.ide.de

4 4

Re: [oXygen-user] v 9.2 acting flaky
by Robert Koberg 09 May '08

09 May '08

Forgot to CC the list. Anyway, I just lost keyboarding ability again -- I am using oXygen standalone - not in eclipse. Clicking with the mouse works fine and keying in other apps works fine (including eclipse). I have started from a panel icon with the command: /bin/sh "/home/rkoberg/apps/Oxygen9/oxygen" I am going to start is with the shell script as you recommend below. thanks, -Rob On Fri, 2008-05-09 at 12:42 -0400, Robert Koberg wrote: > I deleted the default /opt/Oxygen9 install and installed it under my > home folder and so far I have not lost the ability to use my keyboard > (yes, I lost all keying ability in oxygen, every other open app worked > fine). > > I originally installed with sudo: > > $ sudo sh ./oxygen.sh > > I let it install to the default (/opt/Oxygen9). I de-selected the > options for TEI, DITA and docbook in the installer. It failed to create > the shortcut for my desktop. > > When closing oxygen, I got errors saying it could not write to the > oxygen tmp dir for (if I remember correctly) dita, tei and docbook. > > Everything seems to be working fine now after I installed under my home > folder (which I think should be the default anyway). But, working in > oxygen seems much slower than before I upgraded. I have restarted my > machine - it has 2 gigs of memory and dual 1.66 processors. (I don't > have any swap space in use) > > I am using Ubuntu 8.04 with the default Compiz and the Appearance > preference set to the Normal option. > > > > On Fri, 2008-05-09 at 19:01 +0300, George Cristian Bina wrote: > > Hi Rob, > > > > Can you try starting oXygen with the startup script: > > > > sh oxygen.sh > > > > That should use the default Java installation from your machine. > > Let us know if you still have issues. > > > > Best Regards, > > George > > -- > > George Cristian Bina > > <oXygen/> XML Editor, Schema Editor and XSLT Editor/Debugger > > http://www.oxygenxml.com > > > > > > Robert Koberg wrote: > > > Hi, > > > > > > Is it just me or is version 9.2 acting strangely? I keep losing the > > > ability to use the keyboard for things like cut and paste. > > > > > > I am on Ubuntu Gutsy Gibbon (8.x with the latest updates). I have java > > > 1.6.05 installed. I noticed in the install that oxygen cam bundled with > > > this JVM as well(??). > > > > > > rkoberg:$ java -version > > > java version "1.6.0_05" > > > Java(TM) SE Runtime Environment (build 1.6.0_05-b13) > > > Java HotSpot(TM) Server VM (build 10.0-b19, mixed mode) > > > > > > thanks, > > > -Rob > > > > > > _______________________________________________ > > > oXygen-user mailing list > > > oXygen-user(a)oxygenxml.com > > > http://www.oxygenxml.com/mailman/listinfo/oxygen-user

1 0

v 9.2 acting flaky
by Robert Koberg 09 May '08

09 May '08

Hi, Is it just me or is version 9.2 acting strangely? I keep losing the ability to use the keyboard for things like cut and paste. I am on Ubuntu Gutsy Gibbon (8.x with the latest updates). I have java 1.6.05 installed. I noticed in the install that oxygen cam bundled with this JVM as well(??). rkoberg:$ java -version java version "1.6.0_05" Java(TM) SE Runtime Environment (build 1.6.0_05-b13) Java HotSpot(TM) Server VM (build 10.0-b19, mixed mode) thanks, -Rob

2 1

Tools -> Canonicalize mangles non-Latin1 characters
by Jirka Kosek 08 May '08

08 May '08

Hi, when you try to C14N document with non-Latin1 characters, you will get mangled output. Do you think that this could be fixed in the next release? Thanks, Jirka -- ------------------------------------------------------------------ Jirka Kosek e-mail: jirka(a)kosek.cz http://xmlguru.cz ------------------------------------------------------------------ Professional XML consulting and training services DocBook customization, custom XSLT/XSL-FO document processing ------------------------------------------------------------------ OASIS DocBook TC member, W3C Invited Expert, ISO JTC1/SC34 member ------------------------------------------------------------------

2 1

Author mode doesn't support accented letters in selectors
by Jirka Kosek 08 May '08

08 May '08

Hi, it seems that in Author mode (in oXygen 9.1) doesn't recognize accented letters in CSS selectors and thus it is not unable to properly style documents that use non-English characters in element names. See attached test files. Text "AAA" should display in red, but Author mode displays it in black as it ignores selector in čuk { color: red; } Jirka -- ------------------------------------------------------------------ Jirka Kosek e-mail: jirka(a)kosek.cz http://xmlguru.cz ------------------------------------------------------------------ Professional XML consulting and training services DocBook customization, custom XSLT/XSL-FO document processing ------------------------------------------------------------------ OASIS DocBook TC member, W3C Invited Expert, ISO JTC1/SC34 member ------------------------------------------------------------------

2 1

No Button for Xref Creation in 9.2
by Eliot Kimber 07 May '08

07 May '08

I notice that there's a toolbar button for creating content references but no button for creating xrefs--would it be possible to add one? Or have I missed a configuration option? Thanks, Eliot -- Eliot Kimber Senior Solutions Architect "Bringing Strategy, Content, and Technology Together" Main: 610.631.6770 www.reallysi.com www.rsuitecms.com

2 2