- oXygen-user - www.oxygenxml.com

XSLT disable validation on Saxon EE not working
by Tara Athan 19 Nov '12

19 Nov '12

I have an xml file with an association to a Relax NG schema. Whenever I apply an XSLT transformation to it, it seems to validate the file against the schema before it carries out the transformation. The reason I suspect this is I am using a remote schema so it takes a long time to carry out the transformation compared to when I remove the schema association. I even have schema caching turned on, but that also seems to be malfunctioning, as the time necessary to validate does not decrease upon repitition. Thanks, Tara

2 1

XSLT disable validation on Saxon EE not working
by Tara Athan 19 Nov '12

19 Nov '12

I forgot to say - I am using version 14.1 and using the Saxon EE option for transformation. I have an xml file with an association to a Relax NG schema. Whenever I apply an XSLT transformation to it, it seems to validate the file against the schema before it carries out the transformation. The reason I suspect this is I am using a remote schema so it takes a long time to carry out the transformation compared to when I remove the schema association. I even have schema caching turned on, but that also seems to be malfunctioning, as the time necessary to validate does not decrease upon repitition. Thanks, Tara

1 0

Looking for way to disable 'Key reference' validation error
by Aaron Claypoole 16 Nov '12

16 Nov '12

When validating a ditamap currently we are getting a lot of 'Key reference' errors. In our current environment they are to be expected as they are related to glossary terms we haven't 'hooked' up yet. Is there any way to filter out these errors when running the validate operation on the ditamap from the 'DITA Maps Manager'? Is there an extension or something that can be added? I checked to see if it was being output based on any of the schematron validation files but didn't find anything. The type of error when copied from the 'Errors' tab is: System ID: C:\DEVELOPMENT\TCE_RESEARCH\LOGICAL_OPERATIONS\PRODUCTION_CONTENT\lo_092012\trunk\092012\lsn_01\intro.dita Engine name: oXygen Severity: error Description: Key definition "gloss_raster" not found in the DITA Map context. Type: Key reference Start location: 10:27 End location: 10:55 Any insight would be greatly appreciated. -Aaron Claypoole [Description: LO_email-sig-logo96] Aaron Claypoole Senior Software Engineer aaron.claypoole(a)logicaloperations.com<mailto:aaron.claypoole@logicaloperations.com> www.logicaloperations.com<http://www.logicaloperations.com/> 500 Canal View Blvd. | Rochester, NY 14623 (W) +1.585.350.7021 [cid:image002.png@01CD6690.14C067D0]<http://www.linkedin.com/company/2539101?trk=tyah>[cid:image003.png@01CD6690.14C067D0]<https://twitter.com/logicalops> This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message and any attachment.

3 2

[Ann] New maintenance build available for oXygen 14.1 (2012111217)
by Adrian Buza 14 Nov '12

14 Nov '12

Dear oXygen users, We announce the release of a new maintenance build (2012111217) for oXygen 14.1 (XML Editor, XML Developer, XML Author). The build number can be verified in the Help -> About dialog box from the application (next to the version number). You can download the new installation kits from our web site: http://www.oxygenxml.com/download.html Here you can find the complete list of bug-fixes: http://www.oxygenxml.com/build_history.html#2012111217 You can follow our oXygen release/build RSS feed here: http://www.oxygenxml.com/rssBuildID.xml Please let us know if you encounter any problems with this new build. Regards, Adrian Adrian Buza oXygen XML Editor and Author Support Tel: +1-650-352-1250 ext.202 Fax: +40-251-461482 support(a)oxygenxml.com http://www.oxygenxml.com

1 0

BaseX Support in oXygen?
by Hannes Bauer 14 Nov '12

14 Nov '12

Dear developer team, oXygen is our favorite XML editor - but it seems to lack good support for our favorite XML database BaseX. While I cannot find any reference to "BaseX" in the dialog windows of oXygen, I have found some information in the BaseX documentation, describing how to open documents via WebDAV or execute queries via XQuery (http://docs.basex.org/wiki/Integrating_oXygen) But those two variants don't seem to complement each other. I would be very interested... a) if you plan a better integration of BaseX in your system? b) what's currently the easiest way to access all BaseX databases and documents from within oXygen? In other words, do I always have to use "File" -> "Open URL..." to get all database resources listed? Thanks a lot in advance, Hannes PS: I've tried to send this mail quite a while ago, but apparently it didn't make it to the list, so this is the second run.. Sorry for persistiing.

3 7

highlight only child element
by Roderik Dernison 08 Nov '12

08 Nov '12

Hi, I'm improving my stylesheet for my topics in oXygen. I was able to put indices before numbered items in lists. But when a list contains only one element no index should be shown. <ul> <li>First</li> <li>Second</li> </ul> Should be shown as: a. First b. Second But: <ul> <li>Single</li> </ul> Should be shown as: Single I have tried the css markup li:only-child which works for html in Firefox. Kind regards, Ing. Roderik Dernison Programmeur/ontwikkelaar INL * Schatkamer van de Nederlandse Taal Matthias de Vrieshof 2 * Kamer 106a * 2311 BZ Leiden Tel. +31 (0)71 527 2491 * www.inl.nl<http://www.inl.nl/> ________________________________ ---------------------------------------------------------- Aan dit bericht kunnen geen rechten worden ontleend. Het bericht is alleen bestemd voor de geadresseerde. Indien het bericht niet voor u is bestemd, verzoeken wij u dit aan ons te melden en het bericht te verwijderen. This message shall not constitute any obligations. This message is intended solely for the addressee. If you have received this message in error, please inform us and delete the message. ----------------------------------------------------------

2 1

oXygen framework for NLM/NISO JATS
by Wendell Piez 07 Nov '12

07 Nov '12

Hi, Inspired by the fantastic how-to video by Costin Sandoi at http://www.oxygenxml.com/demo/FrameworkConfiguration.html, I've put together a framework for NLM/NISO JATS. It comes with DTDs for the latest versions of JATS (NISO Z39.96-2012) v1.0, and the draft of the related format, NLM BITS 0.2 (using most of the same tagging as the journal articles except for books). https://github.com/wendellpiez/oXygenJATSframework It's a beta, and contributions are welcome. Cheers, Wendell -- Wendell Piez | http://www.wendellpiez.com XML | XSLT | electronic publishing Eat Your Vegetables _____oo_________o_o___ooooo____ooooooo_^

1 0

customizing for pdf output
by David Yin 30 Oct '12

30 Oct '12

Solved... I originally had the customization folder as a subfolder to the working directory. So I had dita source files and output within the same folder as the customization folder. I pulled out the customization folder and put it on c: directory and the logo appeared. Whew... I wasted 2 days with this issue. Message: 3 Date: Tue, 23 Oct 2012 12:01:56 -0500 From: "David Yin" <David.Yin(a)PACCAR.com> Subject: [oXygen-user] customizing for pdf output To: <oxygen-user(a)oxygenxml.com> Message-ID: <0881E3ECD7D6EE4B862B95B2A814147209DA72EE(a)PBCDEPMXM5.na.paccar.com> Content-Type: text/plain; charset="us-ascii" I have been trying to follow the Oxygen guide on inserting a company logo onto the title page for the pdf ouput. I have read the online instructions and have searched your forum. I have checked and double checked that I made the modifications as per instructions. I have modified many pieces of code and have matched what works for other people. Sadly, I have yet to be successful at inserting anything, image or text, onto the title page. I made one attempt a header/footer customization but that did not change the output either. Please help.

3 2

Oxygen goes fullscreen finally!
by Shannon Scott Shiflett 24 Oct '12

24 Oct '12

I'm more excited about this than I should be, but I just noticed that under OS X Lion and Mountain Lion, the Oxygen app now has the fullscreen button in the toolbar--not sure if that's something you were able to add, or maybe it arrived in the last Java update, but now it works much better with Mission Control, which is awesome. Thanks!

3 2

Converting DITA-OT plugin from 1.5.4 to 1.6
by KAATMAN Matthew 24 Oct '12

24 Oct '12

Would anyone be willing to assist me in converting my plugin from 1.5.4 to 1.6? I followed the instructions here: http://dita-ot.sourceforge.net/1.6.1/readme/dita2pdf-customization.html >From Oxygen, I duplicated the "Run DITA OT Integrator" scenario. I changed the working directory and build file path to my new directory: C:/PFW/Oxygen XML Editor 14.1/plugins/com.biomerieux.pdf_um/ I ran it: Executing: "c:\pfw\oxygen xml editor 14.1\jre/bin/java" "-Dhttp.proxySet=true" "-Dhttp.proxyHost=10.16.0.59" "-Dhttp.proxyPort=8118" -Xmx256m -classpath "C:\PFW\Oxygen XML Editor 14.1/tools/ant/lib/ant-launcher.jar" "-Dant.home=C:\PFW\Oxygen XML Editor 14.1/tools/ant" org.apache.tools.ant.launch.Launcher -f "C:/PFW/Oxygen XML Editor 14.1/plugins/com.biomerieux.pdf_um/integrator.xml" "-Dstrict=true" Buildfile: C:\PFW\Oxygen XML Editor 14.1\plugins\com.biomerieux.pdf_um\integrator.xml BUILD SUCCESSFUL Total time: 0 seconds The process finished with exit code: 0 Then I'm a bit lost. I thought at that point I could click new under the scenarios and I would see a transformation type that matched. Any guidance on where I've gone wrong? Thanks! Matt AVIS : Ce courrier et ses pieces jointes sont destines a leur seul destinataire et peuvent contenir des informations confidentielles appartenant a bioMerieux. Si vous n'etes pas destinataire, vous etes informe que toute lecture, divulgation, ou reproduction de ce message et des pieces jointes est strictement interdite. Si vous avez recu ce message par erreur merci d'en prevenir l'expediteur et de le detruire, ainsi que ses pieces jointes. NOTICE: This message and attachments are intended only for the use of their addressee and may contain confidential information belonging to bioMerieux. If you are not the intended recipient, you are hereby notified that any reading, dissemination, distribution, or copying of this message, or any attachment, is strictly prohibited. If you have received this message in error, please notify the original sender immediately and delete this message, along with any attachments.

4 8