- oXygen-user - www.oxygenxml.com

Re: [oXygen-user] Problems with Find/Replace in Files
by Tara Athan 28 Mar '11

28 Mar '11

Thanks for the advice. The error occured just by opening the Find/Replace in Files dialog. I tried clearing the configuration directory and that worked! Tara Barton Wright wrote: > Hi Tara, > > Does the error happen just by opening the Find/Replace dialog, or only when you search for something using that dialog? Are you by any chance searching for a string that contains /0 with the regular expressions check box selected? > > To restore Oxygen back to a clean starting point, you can try removing its configuration directory, then restarting. First, make sure you have your Oxygen license key safely stored elsewhere, because you will probably have to re-enter it. > > For Windows XP, that directory is: > C:\Documents and Settings\username\Application Data\com.oxygenxml > > On Windows 7, the same directory is: > C:\Users\username\AppData\Roaming\com.oxygenxml > The AppData directory is hidden by default. You can type %appdata% in the Windows Explorer navigation field as a shortcut to jump there. > > > -----Original Message----- > From: oxygen-user-bounces(a)oxygenxml.com [mailto:oxygen-user-bounces@oxygenxml.com] On Behalf Of Tara Athan > Sent: Saturday, March 26, 2011 2:15 PM > To: oxygen-user(a)oxygenxml.com > Subject: [oXygen-user] Problems with Find/Replace in Files > > I am seeing a new problem in oXygen Editor, although I have been using the software for several weeks now and this problem did not arise until I cam close to the deadline for my deliverable :/ It only appears when I try to open the Find/Replace in Files dialog. I depend heavily on Find/Replace in Files, so this error has stopped me in my tracks. See error message below. > > I tried re-installing oXygen, and also uninstalled some other programs on the chance that they were causing the problem, but so far no luck. > Has anyone else run into this problem and, I hope, found a solutions? > > I am on Windows XP, with <oXygen/> XML Editor 12.1, build 2011031114 > > > The application detected an error that is not automatically handled. It is possible that this error is not critical and the application may continue to work normally but our recommendation is to report the error and restart the application. If the application has become unstable and cannot be closed normally, you can use the Force Quit button from this dialog. Be aware that by doing this you will lose all unsaved changes in the opened documents. > > Here are the error details: > > [ AWT-EventQueue-0 ] - java.lang.ArithmeticException: / by zero > java.lang.ArithmeticException: / by zero > at ro.sync.ui.application.cb$_b.getListCellRendererComponent(Unknown > Source) > at javax.swing.plaf.basic.BasicListUI.updateLayoutState(Unknown Source) > at javax.swing.plaf.basic.BasicListUI.maybeUpdateLayoutState(Unknown > Source) > at javax.swing.plaf.basic.BasicListUI$Handler.valueChanged(Unknown > Source) > at javax.swing.DefaultListSelectionModel.fireValueChanged(Unknown > Source) > at javax.swing.DefaultListSelectionModel.fireValueChanged(Unknown > Source) > at javax.swing.DefaultListSelectionModel.fireValueChanged(Unknown > Source) > at javax.swing.DefaultListSelectionModel.changeSelection(Unknown Source) > at javax.swing.DefaultListSelectionModel.changeSelection(Unknown Source) > at > javax.swing.DefaultListSelectionModel.setSelectionInterval(Unknown Source) > at javax.swing.JList.setSelectedIndex(Unknown Source) > at javax.swing.plaf.basic.BasicComboPopup.setListSelection(Unknown > Source) > at javax.swing.plaf.basic.BasicComboPopup.access$300(Unknown Source) > at > javax.swing.plaf.basic.BasicComboPopup$Handler.itemStateChanged(Unknown > Source) > at javax.swing.JComboBox.fireItemStateChanged(Unknown Source) > at javax.swing.JComboBox.selectedItemChanged(Unknown Source) > at javax.swing.JComboBox.contentsChanged(Unknown Source) > at javax.swing.AbstractListModel.fireContentsChanged(Unknown Source) > at javax.swing.DefaultComboBoxModel.setSelectedItem(Unknown Source) > at javax.swing.DefaultComboBoxModel.addElement(Unknown Source) > at ro.sync.ui.fd.rbc(Unknown Source) > at ro.sync.find.t.sxh(Unknown Source) > at ro.sync.find.t.cyh(Unknown Source) > at ro.sync.find.t.<init>(Unknown Source) > at ro.sync.find.t.lyh(Unknown Source) > at ro.sync.exml.e.b.vpe(Unknown Source) > at ro.sync.exml.e.b.upe(Unknown Source) > at ro.sync.exml.e.b$1$1.run(Unknown Source) > at ro.sync.ui.mb$1.run(Unknown Source) > at java.awt.event.InvocationEvent.dispatch(Unknown Source) > at java.awt.EventQueue.dispatchEvent(Unknown Source) > at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source) > at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source) > at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source) > at java.awt.EventDispatchThread.pumpEvents(Unknown Source) > at java.awt.EventDispatchThread.pumpEvents(Unknown Source) > at java.awt.EventDispatchThread.run(Unknown Source) > > -- > Tara Athan > Owner, Athan Ecological Reconciliation Services tara_athan at alt2is.com > 707-272-2115 (cell, preferred) > 707-485-1198 (office) > 249 W. Gobbi St. #A > Ukiah, CA 95482 > > _______________________________________________ > oXygen-user mailing list > oXygen-user(a)oxygenxml.com > http://www.oxygenxml.com/mailman/listinfo/oxygen-user > -- Tara Athan Owner, Athan Ecological Reconciliation Services tara_athan at alt2is.com 707-272-2115 (cell, preferred) 707-485-1198 (office) 249 W. Gobbi St. #A Ukiah, CA 95482

2 1

Problems with Find/Replace in Files
by Tara Athan 26 Mar '11

26 Mar '11

I am seeing a new problem in oXygen Editor, although I have been using the software for several weeks now and this problem did not arise until I cam close to the deadline for my deliverable :/ It only appears when I try to open the Find/Replace in Files dialog. I depend heavily on Find/Replace in Files, so this error has stopped me in my tracks. See error message below. I tried re-installing oXygen, and also uninstalled some other programs on the chance that they were causing the problem, but so far no luck. Has anyone else run into this problem and, I hope, found a solutions? I am on Windows XP, with <oXygen/> XML Editor 12.1, build 2011031114 The application detected an error that is not automatically handled. It is possible that this error is not critical and the application may continue to work normally but our recommendation is to report the error and restart the application. If the application has become unstable and cannot be closed normally, you can use the Force Quit button from this dialog. Be aware that by doing this you will lose all unsaved changes in the opened documents. Here are the error details: [ AWT-EventQueue-0 ] - java.lang.ArithmeticException: / by zero java.lang.ArithmeticException: / by zero at ro.sync.ui.application.cb$_b.getListCellRendererComponent(Unknown Source) at javax.swing.plaf.basic.BasicListUI.updateLayoutState(Unknown Source) at javax.swing.plaf.basic.BasicListUI.maybeUpdateLayoutState(Unknown Source) at javax.swing.plaf.basic.BasicListUI$Handler.valueChanged(Unknown Source) at javax.swing.DefaultListSelectionModel.fireValueChanged(Unknown Source) at javax.swing.DefaultListSelectionModel.fireValueChanged(Unknown Source) at javax.swing.DefaultListSelectionModel.fireValueChanged(Unknown Source) at javax.swing.DefaultListSelectionModel.changeSelection(Unknown Source) at javax.swing.DefaultListSelectionModel.changeSelection(Unknown Source) at javax.swing.DefaultListSelectionModel.setSelectionInterval(Unknown Source) at javax.swing.JList.setSelectedIndex(Unknown Source) at javax.swing.plaf.basic.BasicComboPopup.setListSelection(Unknown Source) at javax.swing.plaf.basic.BasicComboPopup.access$300(Unknown Source) at javax.swing.plaf.basic.BasicComboPopup$Handler.itemStateChanged(Unknown Source) at javax.swing.JComboBox.fireItemStateChanged(Unknown Source) at javax.swing.JComboBox.selectedItemChanged(Unknown Source) at javax.swing.JComboBox.contentsChanged(Unknown Source) at javax.swing.AbstractListModel.fireContentsChanged(Unknown Source) at javax.swing.DefaultComboBoxModel.setSelectedItem(Unknown Source) at javax.swing.DefaultComboBoxModel.addElement(Unknown Source) at ro.sync.ui.fd.rbc(Unknown Source) at ro.sync.find.t.sxh(Unknown Source) at ro.sync.find.t.cyh(Unknown Source) at ro.sync.find.t.<init>(Unknown Source) at ro.sync.find.t.lyh(Unknown Source) at ro.sync.exml.e.b.vpe(Unknown Source) at ro.sync.exml.e.b.upe(Unknown Source) at ro.sync.exml.e.b$1$1.run(Unknown Source) at ro.sync.ui.mb$1.run(Unknown Source) at java.awt.event.InvocationEvent.dispatch(Unknown Source) at java.awt.EventQueue.dispatchEvent(Unknown Source) at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source) at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source) at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source) at java.awt.EventDispatchThread.pumpEvents(Unknown Source) at java.awt.EventDispatchThread.pumpEvents(Unknown Source) at java.awt.EventDispatchThread.run(Unknown Source) -- Tara Athan Owner, Athan Ecological Reconciliation Services tara_athan at alt2is.com 707-272-2115 (cell, preferred) 707-485-1198 (office) 249 W. Gobbi St. #A Ukiah, CA 95482

1 0

Transformation output
by Shannon 18 Mar '11

18 Mar '11

Hi, On this box, I have a transformation scenario configured with the XSL URL on a shared network drive and the XML URL on my local file system; when I transform, the stylesheet calls xsl:result-document to output many new documents, and the output is created in the same working directory as the _XSL_ URL. However, on another box, using an almost identical setup (Oxygen 12.0, OS X 10.6.6, Java 1.6.0_24, Saxon-PE 9.1.2.1), the output is created in the same working directory as the _XML_ URL. I don't see a way in the GUI to configure this--it would be awesome if the Output tab would allow me to specify the output destination (currently if I choose "Prompt for file", it will only work for the _first_ file handled by xsl:result-document). Can you assist, or may I submit a request for future enhancement? Thanks, Shannon -- Shannon Scott (Shiflett(a)virginia.edu) Developer, University of Virginia Press Box 400318, Charlottesville, VA 22904-4318 Books: http://www.upress.virginia.edu Digital: http://rotunda.upress.virginia.edu Facebook: http://www.facebook.com/uvapress Twitter: http://twitter.com/uvapress

3 2

save to URL give 405 not allowed
by Tara Athan 16 Mar '11

16 Mar '11

I have some schema posted on my (bluehost) website under public_html. If I try to use oxygen to edit these files directly, I can open them, and make changes in the GUI, but then when I click Save (or Save to URL) I get the Error 405 not allowed. It could be something about the way the host server is set up, which I have little control over. But I have been able to directly edit files on this website from other programs (in particular PSPad). My current workaround is to maintain a local copy and upload using Filezilla. Any suggestions? Tara

1 0

Expand the comparison window
by O'Donnell, Dan 14 Mar '11

14 Mar '11

Sorry for asking what I am sure is a dumb question: in the svn client, is there a way of unpinning the comparison window or making it full screen? In Linux Gnome, at any rate, it seems to bump into stops that prevent it expanding and I don't see any way of making it bigger. I thought there used to be an unpinning button or similar? -dan

2 1

[BUG] line-length
by Reaves, Timothy 09 Mar '11

09 Mar '11

I am working with SVG images, and XSLT. When i open an SVG, the editor tells me that the file contains long lines that may impact performance, and when it opens the file, it wraps the lines. This is a defect. I do not want the lines wrapped, and have Line Wrap disabled in preferences. As an aside, what does the length of th line have to do with oXygen and its performance? Thanks.

1 0

JDBC SqlServer Help
by Karl Stubsjoen 06 Mar '11

06 Mar '11

I am trying to connect to an instance of SqlServer 2008 R2 on my local system. They connection fails with: names instance XXXXXXXXX has failed. Error: java.netSocketTimeoutException...... In researching this, I am discovering that I might need to get Sql Browser service to run (which is proving to be difficult). Is this a necessary step? Is it this difficult? I'm attempting to generate a schema from an existing database structure. Karl..

1 1

Detecting the oXygen license type
by Michael Anthony Smith 04 Mar '11

04 Mar '11

We wish to provide an oXygen plugin whose licensing mirrors that of the oXygen license types. Therefore, it would be useful if our plugin could discover which of the oXygen license types it host was using; this license type could then be checked for consistency with the plugin's license. Regards, Anthony. -- -- ------------------------------------------------------------------------- Michael Anthony Smith, DeltaXML Ltd "Change control for XML" T: +44 1684 578751 E: anthony.smith(a)deltaxml.com http://www.deltaxml.com Registered in England 02528681 Reg. Office: Monsell House, WR8 0QN, UK

2 3

Turning off cache?
by Tara Athan 04 Mar '11

04 Mar '11

I am working on a Relax NG schema which will be converted automatically to XSD and documentation generated in oXygen. During development I am constantly modifying the Relax NG, validating and then performing the conversion to XSD and generating the documentation to see how it looks. I find that the validation and other steps are frequently behind regarding the modifications of modules, presumably because there is some caching going on. It's a royal pain - I have to delete the old xsd and documentation to get it to clear the cache ( I have tried selecting "clear cache and validate" on the main module, but it doesn't do the trick). Is there anyway to just turn off the caching? I have looked through the preferences menu, but I can't find this option. Thanks, Tara

2 1

Plugin testing.
by Michael Anthony Smith 04 Mar '11

04 Mar '11

Our plugin is now nearing 'feature' completion, and I am in the process of automating the manual testing. This is reasonably straightforward for those aspects of the plugin that are independent of the oXygen API, as these can be run through our TestNG framework. I was wondering if anybody had some suggestions for how to automate tests involving the use of the oXygen API (and GUI components). For example is there a mechanism to simulate the selection of windows, menu items, button presses, etc in oXygen, that could be provided as an argument to a command-line invocation? Any suggestions welcome. Regards, Anthony. -- -- ------------------------------------------------------------------------- Michael Anthony Smith, DeltaXML Ltd "Change control for XML" T: +44 1684 578751 E: anthony.smith(a)deltaxml.com http://www.deltaxml.com Registered in England 02528681 Reg. Office: Monsell House, WR8 0QN, UK

2 1