- oXygen-user - www.oxygenxml.com

Re: [oXygen-user] oxygen hangs when saving to URL
by Sorin Ristache 21 Sep '07

21 Sep '07

Dear Christian, The log files are many and very large. I looked in one of them and I could not find data about the hang. Until I look in all the log files that you sent please try to get a smaller oXygen log with the problem. For this you should close all the files that are already open in oXygen, close oXygen, remove all oxygen.log.* files, start oXygen again, reproduce the problem without any additional work in oXygen if that is possible and send again the generated oxygen.log.* file(s). Thank you, Sorin Christian Wittern wrote: > Sorin, > > here are the logfiles. > > Christian > > On 21/09/2007, Sorin Ristache <sorin(a)oxygenxml.com> wrote: >> Hello, >> >> Please send the log file again. Include all the oxygen.log.* files in >> the zip archive. >> >> >> Regards, >> Sorin >> >> >> Christian Wittern wrote: >>> On 21/09/2007, Christian Wittern <cwittern(a)gmail.com> wrote: >>>>> Can you send detailed steps specifying also the path to a file in the >>>>> eXist database for opening and saving the file for which oXygen hangs on >>>>> your computer? >>>>> >>>> Well, as I said here is the problem. It does not hang always, when it >>>> hangs, this mostly occurs after a few hours work. I will try to pay >>>> attention to what happened immediately before it hangs and tell it to >>>> you. >>> Well, it just happened again:-( This time, I can tell you what I did: >>> I saved the file /db/system/config/db/kbos/tls/en/en.xconf without >>> problem, then I saved the file >>> /db/system/config/db/kbos/tls/zh/zh.xconf, also without problems and >>> immediately after this, I saved >>> /db/system/config/db/kbos/tls/tls.xconf, at which point Oxygen stopped >>> responding. Do you need the logfile again? >>> >>> All the best, >>> >>> Christian >>> >> _______________________________________________ >> oXygen-user mailing list >> oXygen-user(a)oxygenxml.com >> http://www.oxygenxml.com/mailman/listinfo/oxygen-user >> > >

1 0

oxygen says W3C html strict DTD has errors
by Lars Huttar 21 Sep '07

21 Sep '07

Hello, I'm editing an HTML document in Oxygen. The document begins with <!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd"> When I try to save, Oxygen shows an "error" in the DTD: SystemID: http://www.w3.org/TR/html4/strict.dtd Location: 81:5 Description: The declaration for the entity "ContentType" must end with '>'. The offending location is the second of these three lines in strict.dtd: <!ENTITY % ContentType "CDATA" -- media type, as per [RFC2045] --> Maybe this is because the DTD is an SGML DTD rather than an XML one? I don't know, but it seems strange for a W3C DTD to be called erroneous! Incidentally, I think this DOCTYPE declaration was added by HTML Tidy, or possibly by an HTML editor program. Lars

2 5

Re: [oXygen-user] oxygen hangs when saving to URL
by Sorin Ristache 21 Sep '07

21 Sep '07

Hello, I could browse the content of the eXist database and open files in oXygen without problems by using the jar files from the latest eXist distribution available on the eXist website (eXist version 1.1.1 build 4311, build number 20061104). I opened the file db/shared/biblib.xq from the Database Explorer view of oXygen and I edited and saved it without errors or hangs. Also I opened the file using WebDAV (the Open URL action) and I edited and saved it using Ctrl + S without errors or hangs. The same thing happened when I saved the edited file to the same location using WebDAV (the Save to URL action). When I tried to save it to other location (db/shared/biblib2.xq, db/home/chris/biblib2.xq) the WebDAV server reported the 403 Forbidden error which means the guest user does not have permission to create new files. The same thing on both Windows XP and Mac OS X. Can you send detailed steps specifying also the path to a file in the eXist database for opening and saving the file for which oXygen hangs on your computer? Regards, Sorin Christian Wittern wrote: > Sorin, > > You will find the server at http://chw.zinbun.kyoto-u.ac.jp:8899, the > guest account is open. > BTW, I am not sure this is a fault of eXist at all, it only always > occurs when I press the "Save to URL" button and the only webdav server > I am using is eXist. > > Hope you can find out something about it. > > Christian > > Sorin Ristache wrote: >> Hello, >> >> The two log files show no errors or delays in the communication with the >> eXist server at http://localhost:8899/exist/xmlrpc. The connections to >> the server are opened, used for reading/writing and closed without >> errors. Can I get access to the server to test it myself in oXygen? >> >> >> Best regards, >> Sorin >> >> >> Christian Wittern wrote: >> >>> Sorin, >>> >>> oXygen hanged again, so I am sending you another log file. I hope you >>> find the reason. I can confirm that the eXist instance is still live and >>> responding to requests, also oXygen is using the drivers from exactly >>> the same eXist instance. >>> >>> All the best, >>> >>> Christian

2 3

Re: [oXygen-user] oxygen hangs when saving to URL
by Sorin Ristache 19 Sep '07

19 Sep '07

Hello, The two log files show no errors or delays in the communication with the eXist server at http://localhost:8899/exist/xmlrpc. The connections to the server are opened, used for reading/writing and closed without errors. Can I get access to the server to test it myself in oXygen? Best regards, Sorin Christian Wittern wrote: > Sorin, > > oXygen hanged again, so I am sending you another log file. I hope you > find the reason. I can confirm that the eXist instance is still live and > responding to requests, also oXygen is using the drivers from exactly > the same eXist instance. > > All the best, > > Christian > > Sorin Ristache wrote: >> Hello, >> >> I tried with the eXist server 1.1 build 20061104 which I see is the >> latest build available on the eXist website >> (eXist-1.1.1-newcore-build4311.jar) and also with a previous one (build >> 20061024) but I could not reproduce the hang problem. I tried on both >> Windows XP and Mac OS X 10.4.10 (PowerPC). I could open, edit and save >> files in oXygen 8.2 from the two eXist databases without problems. >> Please copy the attached file in your [oXygen-install-folder]/lib >> folder, restart oXygen, reproduce the problem and send us the >> [oXygen-install-folder]/oxygen.log file. >> >> >> Regards, >> Sorin >> >> >> Christian Wittern wrote: >> >>> Dear oXygen users and developers, >>> >>> When using oXygen to access files on the eXist database, I frequently >>> encounter a situation where oXygen hangs and stops responding to any input. >>> This occurs when saving to URL, especially, (although I am not 100% sure, >>> since this is difficult to test efficiently) but not always, when saving a >>> new file. I wonder what might cause this problem and how to avoid it. >>> >>> For your information, this happens on both Intel and PPC Macs with the >>> latest OS X installed (but I seem to recall having this also experienced >>> with a Windows XP machine), eXist is a recent SVN build. >>> >>> All the best, >>> >>> Christian Wittern

1 0

oxygen hangs when saving to URL
by Christian Wittern 18 Sep '07

18 Sep '07

Dear oXygen users and developers, When using oXygen to access files on the eXist database, I frequently encounter a situation where oXygen hangs and stops responding to any input. This occurs when saving to URL, especially, (although I am not 100% sure, since this is difficult to test efficiently) but not always, when saving a new file. I wonder what might cause this problem and how to avoid it. For your information, this happens on both Intel and PPC Macs with the latest OS X installed (but I seem to recall having this also experienced with a Windows XP machine), eXist is a recent SVN build. All the best, Christian Wittern -- Christian Wittern Institute for Research in Humanities, Kyoto University 47 Higashiogura-cho, Kitashirakawa, Sakyo-ku, Kyoto 606-8265, JAPAN

2 1

Generating "hot" reports
by Wendell Piez 18 Sep '07

18 Sep '07

Hi, One nice feature in oXygen is that you can wire in External Tools, and oXygen will capture their outputs in a Command Results panel. Another is, of course, that you can link directly from reports generated by validators, XPath queries and the like -- which also appear in Command Results panels. Can these two features be combined? In other words, would it be possible for me to generate a report in an external tool which, once oXygen picked it up in its panel, would allow me to link directly to locations named in the report? I'm familiar with the "SystemID", "Location", "Description" format oXygen saves out from command results, but apparently (unless I'm missing something) what I want to do here isn't quite as simple as creating this format. Is this a feature request, or should I be able to accomplish what I want already? Regards, Wendell ====================================================================== Wendell Piez mailto:wapiez@mulberrytech.com Mulberry Technologies, Inc. http://www.mulberrytech.com 17 West Jefferson Street Direct Phone: 301/315-9635 Suite 207 Phone: 301/315-9631 Rockville, MD 20850 Fax: 301/315-8285 ---------------------------------------------------------------------- Mulberry Technologies: A Consultancy Specializing in SGML and XML ======================================================================

2 5

debugger questions
by James Don 13 Sep '07

13 Sep '07

Hello, Just wanted to send some feed back on the tool regarding the xsl debugger: - Why do breakpoints not set ? There are 2 "add break point"s in the right click menu ... only 1 seems to add break points ... the other just changes the colour of the break point. - Watched variables don't update as you step in the debugger ... unless of course you click around in the gui to force a refresh ... this makes debugging pretty annoying ... - Can't break on variable definitions ... i keep getting an error msg that says "Breakpoints can only be created on a line containing the end of a start tag" ? - Inside some looping constructs it seems watches on certain xpaths return null ... even though variables dependent on the same xpath are set ... Cheers, Jim

2 1

Editing & Processing DITA on 8.2
by Khaled Aly 11 Sep '07

11 Sep '07

Hello Sorin / oXygen users Can anyone provide some guidelines/clues on using DITA 1.0 on oXygen 8.2 (while it does not yet incorporate DITA's Open Toolkit), provided the right DTDs are referenced. I got below some specific issues: - Filename extensions: although DITA's topic or map markup is well-formed XML and should validate against the corresponding DTD, DITA uses the file name extensions: *.dita and *.ditamap. As far as editing and validating, they seem to validate well with these extensions. - Now for OT processors that are available in O2 current version: Saxon 6.5.5 and FOP, can we set transformation scenarios, based on OT supplied XSLT sheets and process them to generate PDF out of a topic file or a map file? - This is probably for oXygen support. Siren: is the direction to strictly follow the processing tools and scenarios specified by OT (since they are part of the standard), or can we expect oXygen as an independent vendor to provide further transform scenarios beyond those specified by the OT. There is a bit of fuzziness of whether DITA is perceived as an XML application or as a tool. I tend to think of it as an application, but if it is fully dependent on the OT for processing, then it is more like a tool without a specific realization. Appreciate your feedback . Khaled ----- Original Message ----- From: "Oxygen XML Editor support" <support(a)oxygenxml.com> To: "Khaled Aly" <ka.aly(a)luxsci.net> Sent: Monday, August 13, 2007 10:20 AM Subject: Re: DITA? > Hello, > > The next version of oXygen will include DITA support and will be released > in a couple of months. > > > Best regards, > Sorin > > http://www.oxygenxml.com >

2 1

Problem with Eclipse 3.3 plugin and XSL editor on Linux
by Owen Rees 03 Sep '07

03 Sep '07

I recently upgraded my Linux Eclipse installation to the Eclipse Europa package "Eclipse for RCP/Plug-in Developers" and added the Oxygen Eclipse 3.3 plugin. The XML editor seems to be fine but whenever I try to start the XSL editor it says: An SWT error has occurred. [stuff about exiting] Unhandled event loop exception (Time...) Reason: Cannot initialize Drop I have a similar installation on Windows but that seems to be working. Any ideas about what the problem might be? -- Owen Rees ======================================================== Hewlett-Packard Limited. Registered No: 690597 England Registered Office: Cain Road, Bracknell, Berks RG12 1HN

2 1

create XML document from xsd - choose target namespace?
by Linus Kamb 31 Aug '07

31 Aug '07

I have a schema, that starts out with: <?xml version="1.0" encoding="UTF-8" standalone="yes"?> <xs:schema elementFormDefault="qualified" version="1.0" targetNamespace="http://portal.earthscope.org" xmlns:esdp="http://portal.earthscope.org" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:ogc="http://www.opengis.net/ogc" xmlns:gml="http://www.opengis.net/gml"> <xs:import namespace="http://www.opengis.net/gml" schemaLocation="http://schemas.opengis.net/gml/3.1.1/base/feature.xsd"> </xs:import> <xs:import namespace="http://www.opengis.net/ogc" schemaLocation="http://schemas.opengis.net/filter/1.1.0/filter.xsd"> </xs:import> ... When I try to create a new XML document and select this schema file, the create doc wizard chooses the ogc namespace, and therefore offers up as root element all the elements defined in the imported ogc schema. I would like to get the elements defined in *this* schema under the target namespace. I can't seem to change the offered namespace. >> How do I get the create XML document wizard to choose the targetNamespace and the elements defined in this schema document? Running Oxygen 8.2 on Mac OSX 10.4 Thanks, Linus

2 2