February 2011 - oXygen-user - www.oxygenxml.com

Selecting multiple XML file at once for the Schema Converter (trang)
by mozer 02 Jun '11

02 Jun '11

Hi, Problably I didn't see it, but there is no way for me to select a bunch of XML file and add them to generate a schema The only way is too select the file one by one which is tedious Any idea of how to circumvent that ? Xmlizer

3 10

No Framework for NLM?
by Eliot Kimber 01 Jun '11

01 Jun '11

Just realized that there's no built-in framework for NLM documents. Any barrier to that or just no demand? Cheers, E. -- Eliot Kimber Senior Solutions Architect "Bringing Strategy, Content, and Technology Together" Main: 512.554.9368 www.reallysi.com www.rsuitecms.com

7 16

Re: [oXygen-user] document nodes as external parameters
by Florent Georges 04 Apr '11

04 Apr '11

Lee, David wrote: Hi, > Is there any way to pass document nodes directly (not by name) > to XQuery within Oxygen ? oXygen uses (AFAIK) XCC in order to connect to MarkLogic. And XCC supports only (AFAIK) strings for query parameters (a.k.a. external variables). The usual trick is either: 1/ to pass a string with the lexical representation of the document and use xdmp:unquote(), or 2/ to pass the URI of the document to open and use doc(). Regards, -- Florent Georges http://fgeorges.org/

3 3

Can't access external XML documents [SEC=UNCLASSIFIED]
by john.hockaday＠osdm.gov.au 31 Mar '11

31 Mar '11

Hi all, I have in the past been able to access external XML documents using Schematron external validation. I set my proxy, username and password in the Options => Preferences. I now can't access the external XML documents when I validate using Schematron external validation. I get the following error: " SystemID: G:\asdd\profileinfo\Camera.xml Description: [ISO Schematron (XSLT 2.0)] org.apache.commons.httpclient.HttpException: Malformed reply from SOCKS server (http://asdd.ga.gov.au/asdd/profileinfo/gmxCodelists.xml) " The errors in the oxygen.log file looks like this: " ... Editor,resizable,maximized,defaultCloseOperation=DO_NOTHING_ON_CLOSE,rootPane=javax.swing.JRootPane[,4,23,1280x1005,invalid,layout=javax.swing.JRootPane$RootLayout,alignmentX=0.0,alignmentY=0.0,border=,flags=16777673,maximumSize=,minimumSize=,preferredSize=],rootPaneCheckingEnabled=true] 13990767 DEBUG [ AWT-EventQueue-0 ] ro.sync.ui.application.ApplicationDialog - parent: java.awt.Rectangle[x=1276,y=-4,width=1288,height=1032] 13990767 DEBUG [ AWT-EventQueue-0 ] ro.sync.ui.application.ApplicationDialog - parentDedDevice: 12282778 Bounds: java.awt.Rectangle[x=1280,y=0,width=1280,height=1024] 13990767 DEBUG [ AWT-EventQueue-0 ] ro.sync.ui.application.ApplicationDialog - bestFitDevice: 12282778 Bounds: java.awt.Rectangle[x=1280,y=0,width=1280,height=1024] 14022947 DEBUG [ AWT-EventQueue-0 ] ro.sync.ui.application.ApplicationDialog - The focused window is: ro.sync.ui.application.ApplicationDialog$_B[dialog2,1615,423,610x177,invalid,layout=java.awt.BorderLayout,APPLICATION_MODAL,title=Validate with,defaultCloseOperation=DO_NOTHING_ON_CLOSE,rootPane=ro.sync.ui.application.ApplicationDialog$2[,4,23,602x150,layout=javax.swing.JRootPane$RootLayout,alignmentX=0.0,alignmentY=0.0,border=,flags=449,maximumSize=,minimumSize=,preferredSize=],rootPaneCheckingEnabled=true] 14022947 DEBUG [ AWT-EventQueue-0 ] ro.sync.ui.application.ApplicationDialog - KFM: ro.sync.ui.application.ApplicationDialog$_B[dialog2,1615,423,610x177,invalid,layout=java.awt.BorderLayout,APPLICATION_MODAL,title=Validate with,defaultCloseOperation=DO_NOTHING_ON_CLOSE,rootPane=ro.sync.ui.application.ApplicationDialog$2[,4,23,602x150,layout=javax.swing.JRootPane$RootLayout,alignmentX=0.0,alignmentY=0.0,border=,flags=449,maximumSize=,minimumSize=,preferredSize=],rootPaneCheckingEnabled=true] 14022947 DEBUG [ AWT-EventQueue-0 ] ro.sync.ui.application.ApplicationDialog - The top window: ro.sync.ui.application.ApplicationDialog$_B[dialog2,1615,423,610x177,invalid,layout=java.awt.BorderLayout,APPLICATION_MODAL,title=Validate with,defaultCloseOperation=DO_NOTHING_ON_CLOSE,rootPane=ro.sync.ui.application.ApplicationDialog$2[,4,23,602x150,layout=javax.swing.JRootPane$RootLayout,alignmentX=0.0,alignmentY=0.0,border=,flags=449,maximumSize=,minimumSize=,preferredSize=],rootPaneCheckingEnabled=true] 14200437 INFO [ External Validator ] org.apache.commons.httpclient.HttpMethodDirector - I/O exception (java.net.SocketException) caught when processing request: Malformed reply from SOCKS server 14200437 INFO [ External Validator ] org.apache.commons.httpclient.HttpMethodDirector - Retrying request " I don't know how to interpret this error but I feel it has something to do with my proxy settings. Any help would be greatly appreciated. Thanks. John Hockaday Spatial Standards Group (OSDM) GPO Box 378 Canberra ACT 2601 (02) 6249 9735 http://www.osdm.gov.au/ john.hockaday\(a)osdm.gov.au

5 13

Cli guide using DITA
by Surya Prabha Vallae 25 Feb '11

25 Feb '11

Hi, I am writing a cli guide using dita and oxygen. When I generate the pdf of the cli guide, I see that: 1. Contents for the cli book are not generated. The cli guide has only bookmarks. 2. The cli page is flushed right leaving a large vertical empty column on the right of each page. From the looks I understand that this is part of the rendering style for a cli guide. But is there a way to change this? Because my content is overflowing to the right and some part of it is not even visible. Can some one help? Thanks in advance. Surya.

2 1

Grid/Author/Design tabs gray
by Lee, David 24 Feb '11

24 Feb '11

Oxygen 12.1 I'm re-animating my use of Oxygen and want to use the Design mode for XML and Schemas. I cant figure out how to turn them on ! When I load an XML or an XSD file it shows in "Text" mode, and the tabs at the bottom "Grid" , "Design" , "Author" stay gray. Any suggestions on how I can enable these ? ---------------------------------------- David A. Lee Senior Principal Software Engineer Epocrates, Inc. dlee(a)epocrates.com <mailto:dlee@epocrates.com> 812-482-5224

2 3

Re: [oXygen-user] Grid/Author/Design tabs gray - SOLVED
by Lee, David 24 Feb '11

24 Feb '11

OK Now I figured it out ! I needed to do "Open Perspective -> Editor" Now the Text/Grid/Author/Design tabs are active. Thanks ! ---------------------------------------- David A. Lee Senior Principal Software Engineer Epocrates, Inc. dlee(a)epocrates.com 812-482-5224 -----Original Message----- From: oxygen-user-bounces(a)oxygenxml.com [mailto:oxygen-user-bounces@oxygenxml.com] On Behalf Of Lee, David Sent: Thursday, February 24, 2011 8:15 AM To: oXygen-user(a)oxygenxml.com Subject: Re: [oXygen-user] Grid/Author/Design tabs gray OK thanks. My underlying issue is I want to use the XSD Schema diagram , and I cannot find out how to invoke it. There's lots of docs about what to do with it *after* you invoke it but I can't figure out how to show it. ( I was *guessing* that the "Diagram" would show that) Also, I recall being able to enter "Author" mode on simple XML files (like Docbook). Is there no Tree and Authoring without running XQuery or XSLT ? I am editing an XML and an XSD file (Not an XSLT or XQuery file) I just now switched to both XSLT Debugging and XQuery debugging perspectives and the Grid, Author, Design tabs are still blank. Any suggestions ? ---------------------------------------- David A. Lee Senior Principal Software Engineer Epocrates, Inc. dlee(a)epocrates.com 812-482-5224 -----Original Message----- From: oxygen-user-bounces(a)oxygenxml.com [mailto:oxygen-user-bounces@oxygenxml.com] On Behalf Of Sorin Ristache Sent: Thursday, February 24, 2011 8:09 AM To: oxygen-user(a)oxygenxml.com Subject: Re: [oXygen-user] Grid/Author/Design tabs gray Hello, The tabs at the bottom of the editing area should be gray (disabled) only in the XSLT Debugger perspective and the XQuery Debugger one. Just switch to the Editor perspective to enable them. Regards, Sorin Lee, David wrote: > > Oxygen 12.1 > > I'm re-animating my use of Oxygen and want to use the Design mode for > XML and Schemas. > > I cant figure out how to turn them on ! > > When I load an XML or an XSD file it shows in "Text" mode, and the > tabs at the bottom "Grid" , "Design" , "Author" stay gray. > > Any suggestions on how I can enable these ? > _______________________________________________ oXygen-user mailing list oXygen-user(a)oxygenxml.com http://www.oxygenxml.com/mailman/listinfo/oxygen-user _______________________________________________ oXygen-user mailing list oXygen-user(a)oxygenxml.com http://www.oxygenxml.com/mailman/listinfo/oxygen-user

2 1

Shortcut key expand all children
by Karl Stubsjoen 18 Feb '11

18 Feb '11

The shortcut key is suppose to be SHIFT + = but on my keyboard the = shares the key + and what I get is the font size changing in size. Is there an alternate shortcut key to expanding all children? -- Karl Stubsjoen MeetScoresOnline.com (602) 845-0006

2 1

problems with explicit type validation from Relax NG
by Tara Athan 14 Feb '11

14 Feb '11

Request Jing bug fix to allow validation of xs:simpleType elements with an xsi:type attribute I am working on a schema where there is a need for an element <BuiltInData> which holds a literal and allows validation against any built-in type, and otherwise has no attributes. Example (simplified)- <?xml version="1.0" encoding="UTF-8"?> <wrapper xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xs="http://www.w3.org/2001/XMLSchema" xsi:noNamespaceSchemaLocation="BuiltInDataXSD.xsd"> <BuiltInData xsi:type="xs:nonNegativeInteger">123</BuiltInData> <BuiltInData xsi:type="xs:token">Maple St.</BuiltInData> <BuiltInData xsi:type="xs:date">2011-01-30</BuiltInData> <BuiltInData xsi:type="xs:Name">company:Employee</BuiltInData> </wrapper> The Relax NG compact schema is fairly straightforward start = element wrapper {BuiltInData.type+} BuiltInData.type = element BuiltInData { (xsd:duration | xsd:dateTime | xsd:time | xsd:date | xsd:gYearMonth | xsd:gYear | xsd:gMonthDay | xsd:gDay | xsd:gMonth | xsd:boolean | xsd:base64Binary | xsd:hexBinary | xsd:float | xsd:decimal | xsd:double | xsd:anyURI | xsd:QName | xsd:NOTATION | xsd:string) } which converts to the XSD <?xml version="1.0" encoding="UTF-8"?> <xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified"> <xs:element name="wrapper"> <xs:complexType> <xs:sequence> <xs:element maxOccurs="unbounded" ref="BuiltInData"/> </xs:sequence> </xs:complexType> </xs:element> <xs:element name="BuiltInData"> <xs:simpleType> <xs:union memberTypes="xs:duration xs:dateTime xs:time xs:date xs:gYearMonth xs:gYear xs:gMonthDay xs:gDay xs:gMonth xs:boolean xs:base64Binary xs:hexBinary xs:float xs:decimal xs:double xs:anyURI xs:QName xs:QName xs:string"/> </xs:simpleType> </xs:element> </xs:schema> Now the problem is: if I try to validate the XML directly from the Relax NG schema, using oXygen, then I get an error. *** [Jing] found attribute "xsi:type", but no attributes allowed here.*** From my perspective at least, this is a bug in Jing because the XML is valid according to the XSD schema but not according to the supposedly equivalent Relax NG schema (there is no approximation warning upon conversion). I can modifed the Relax NG schema by declaring the attribute element BuiltInData { attribute xsi:type { text }?, ... but that messes up the conversion to XSD. I don't expect Jing to check that the literal matches the datatype, but it should at least ignore the xsi:type attribute, (or better - check that the type could be derived from the element's defined datatype.) So I have 4 options, in reverse order of preference: 1. give up on validation directly from the Relax NG schema 2. maintain two versions of the RNC schema, one for direct validation and one for conversion 3. find a method for validating against the Relax NG schema other than Jing in oXygen 4. request that the validator in oXygen be modified to allow validation of xs:simpleType elements with an xsi:type attribute So I'll start with #4 - any chance this can happen? Thanks, Tara

2 2

starts-with() match on @role in Schematron error reporting?
by Tony Graham 14 Feb '11

14 Feb '11

This message from 2009 describes what happens on Schematron validation: http://www.oxygenxml.com/pipermail/oxygen-user/2009-November/002902.html I couldn't find anything similar in the oXygen documentation. Is it in there? oXygen seems to match on exactly 'warning', etc., in @role, as the 2009 message suggests. However, I am currently working with a system that already has error identifiers along the lines of WARNING_BAD_THING and ERROR_WORSE_THING. I would like to be able to put those in assert/@role and report/@role because the @role values show up in both oXygen and SVRL even when the <assert> or <report> is in an abstract rule. (I.e., there's nothing in ISO Schematron SVRL for an abstract rule firing, but there is for its <assert>s and <report>s.) Is it possible to loosen the @role value matching to set the severity when @role starts with 'warning', etc., instead of matching on the whole @role value? Regards, Tony Graham Tony.Graham(a)MenteithConsulting.com Director W3C XSL FO SG Invited Expert Menteith Consulting Ltd XML Guild member XML, XSL and XSLT consulting, programming and training Registered Office: 13 Kelly's Bay Beach, Skerries, Co. Dublin, Ireland Registered in Ireland - No. 428599 http://www.menteithconsulting.com -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- xmlroff XSL Formatter http://xmlroff.org xslide Emacs mode http://www.menteith.com/wiki/xslide Unicode: A Primer urn:isbn:0-7645-4625-2

2 2