- oXygen-user - www.oxygenxml.com

WebHelp: CSS for 2nd and 3rd levels of menu?
by Kristen James Eberlein 28 Jan '20

28 Jan '20

Can someone point me to the CSS for the 2nd and 3rd levels of the menu? I was easily able to discover the CSS for the top-level menu items using CSS inspector, but of course the lower levels are elusive. -- Best, Kris Kristen James Eberlein Chair, OASIS DITA Technical Committee Principal consultant, Eberlein Consulting www.eberleinconsulting.com +1 919 622-1501; kriseberlein (skype)

2 1

Re: [oXygen-user] oXygen-user Digest, Vol 111, Issue 7
by David Birnbaum 24 Jan '20

24 Jan '20

Dear oxygen-user, Thank you, Lee, for pointing me toward the online explanation, but it doesn't help. The instructions seem to have been written for Windows, and I tried adapting them for MacOS, so perhaps that's the source of my difficulty. Here are the details: A few data points: I see no option when viewing the certificate in either Chrome or Firefox (by clicking on the security icon to the immediately left of the URL) to export or save the certificate. The instructions at the link Lee mentioned say that I should be able to view a certificate from the browser and then save it to file, but I don't see an option to do that. The browser accepts the certificate without a question, and doesn't report it as self-signed. It is reported as issued by "Let's Encrypt Authority X3" (under "DST Root CA X3"). Only <oXygen/> seems to think that it is self-signed. What I tried: When I browse my Keychain (under System Roots -> Certificates) I see "DST Root CA X3", and nothing else that comes close to matching what I see when I view the certificate in Chrome. I guessed that this was what I wanted, and I exported it from the Keychain, navigated to the JRE folder for <oXygen/>, adjusted the instructions for MacOS (they were written for Windows, with backslashes and explicit paths), and ran the import command. I was notified that "Certificate already exists in system-wide CA keystore under alias <identrustdstx3> Do you still want to add it to your own keystore?". I told it "no" and restarted <oXygen/> and was not able to open the remote URL. So I ran the import again, told it "yes" this time, restarted <oXygen/>, and got the same error about not being able to open the URL. Best, David On Thu, Jan 16, 2020 at 1:00 PM <oxygen-user-request(a)oxygenxml.com> wrote: > Send oXygen-user mailing list submissions to > oxygen-user(a)oxygenxml.com > > To subscribe or unsubscribe via the World Wide Web, visit > https://www.oxygenxml.com/mailman/listinfo/oxygen-user > or, via email, send a message with subject or body 'help' to > oxygen-user-request(a)oxygenxml.com > > You can reach the person managing the list at > oxygen-user-owner(a)oxygenxml.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of oXygen-user digest..." > > > Today's Topics: > > 1. Re: self-signed certificates (Hart, Lee) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Wed, 15 Jan 2020 17:25:41 +0000 > From: "Hart, Lee" <hleehart(a)amazon.com> > To: "oxygen-user(a)oxygenxml.com" <oxygen-user(a)oxygenxml.com> > Subject: Re: [oXygen-user] self-signed certificates > Message-ID: > <5e20df9778d24e24bfbf3c16dedb7409(a)EX13D13UWB003.ant.amazon.com> > Content-Type: text/plain; charset="utf-8" > > I tried opening a file from a URL on a site that uses a self-signed > certificate. <oXygen/> first asked whether I wanted to allow and trust the > site, and when I told it that I did, <oXygen/> refused to load it, telling > me that: > > Cannot open the specified file. > There was a problem establishing the secure HTTPS connection. In case the > server you are trying to connect to uses self-signed certificates, read the > 'Troubleshooting HTTPS' section from the user manual. > Full error message: sun.security.validator.ValidatorException: PKIX path > building failed: > sun.security.provider.certpath.SunCertPathBuilderException: unable to find > valid certification path to requested target > > I'm running XML Editor 21.1, build 2019120214, with the bundled Java, on > MacOS Mojave. How do I communicate to <oXygen/> that it should trust this > site? I tried adding an exception for the site to my Java configuration, > which didn't help, and I then realized that that was probably because those > exceptions are for my system Java, and <oXygen/> is using its own. > > The instructions at Troubleshooting HTTPS< > https://www.oxygenxml.com/doc/versions/21.1/ug-author/topics/import-https-s…> > in the user manual seem straightforward – where did you have problems > following them? > > Lee >

2 1

self-signed certificates
by David Birnbaum 15 Jan '20

15 Jan '20

Dear oxygen-user list: I tried opening a file from a URL on a site that uses a self-signed certificate. <oXygen/> first asked whether I wanted to allow and trust the site, and when I told it that I did, <oXygen/> refused to load it, telling me that: Cannot open the specified file. There was a problem establishing the secure HTTPS connection. In case the server you are trying to connect to uses self-signed certificates, read the 'Troubleshooting HTTPS' section from the user manual. Full error message: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target I'm running XML Editor 21.1, build 2019120214, with the bundled Java, on MacOS Mojave. How do I communicate to <oXygen/> that it should trust this site? I tried adding an exception for the site to my Java configuration, which didn't help, and I then realized that that was probably because those exceptions are for my system Java, and <oXygen/> is using its own. Thanks, David

2 1

Re: [oXygen-user] Installing oxygen 19.1 on centOS7
by Wingerath, Markus 15 Jan '20

15 Jan '20

Thanks for the advice. Setting max_bpp=24 solved the issue. Originally the color depth was set to 32. According to the manual for the xrdp.ini setting xserverbpp=24 does the same for X11rdp and Xvnc backends. Maybe it's worth adding a paragraph to the users manual? Kind regards, M. Wingerath ______________________________ Landesarchiv Nordrhein-Westfalen Abteilung Rheinland Schifferstraße 30, 47059 Duisburg Tel.: +49 203 98721-427 Fax: +49 203 98721-111 markus.wingerath(a)lav.nrw.de www.lav.nrw.de ______________________________ -----Ursprüngliche Nachricht----- Von: oXygen-user <oxygen-user-bounces(a)oxygenxml.com> Im Auftrag von oxygen-user-request(a)oxygenxml.com Gesendet: Dienstag, 14. Januar 2020 19:00 An: oxygen-user(a)oxygenxml.com Betreff: oXygen-user Digest, Vol 111, Issue 5 Send oXygen-user mailing list submissions to oxygen-user(a)oxygenxml.com To subscribe or unsubscribe via the World Wide Web, visit https://www.oxygenxml.com/mailman/listinfo/oxygen-user or, via email, send a message with subject or body 'help' to oxygen-user-request(a)oxygenxml.com You can reach the person managing the list at oxygen-user-owner(a)oxygenxml.com When replying, please edit your Subject line so it is more specific than "Re: Contents of oXygen-user digest..." Today's Topics: 1. Installing oxygen 19.1 on centOS7 (Wingerath, Markus) 2. Re: Installing oxygen 19.1 on centOS7 (Oxygen XML Editor Support (Adrian Buza)) 3. Re: Installing oxygen 19.1 on centOS7 (Eliot Kimber) ---------------------------------------------------------------------- Message: 1 Date: Tue, 14 Jan 2020 12:19:37 +0000 From: "Wingerath, Markus" <Markus.Wingerath(a)lav.nrw.de> To: "'oxygen-user(a)oxygenxml.com'" <oxygen-user(a)oxygenxml.com> Subject: [oXygen-user] Installing oxygen 19.1 on centOS7 Message-ID: <d97d283e613d433b85bb6c625b373b67(a)lav.nrw.de> Content-Type: text/plain; charset="iso-8859-1" Dear list, I'm trying to install oxygen 19.1 on a VirtualMachine running centOS 7 with GNOME via X11 and OpenJDK 1.8.0. I'm running the install-script with su-privileges, but after drawing the first window (for the language selection), there are no buttons or text. The functionality is there - I can open the drop-down menu - but no text or buttons. I tried using the "unattended installation" as well as unpacking the tarball, both open a window but fail to draw it's contents. The flash screen also appears only as a grey rectangle. The VM sits behind a firewall which blocks ftp-protocols and cannot be altered, because we don't administer it - this has led to problems in the past, therefore it's worth mentioning. I tried Google, but came up empty handed. I'm hoping someone here ran into similar problems and has found a solution. Best wishes, M. Wingerath ______________________________ Landesarchiv Nordrhein-Westfalen Abteilung Rheinland Schifferstraße 30, 47059 Duisburg Tel.: +49 203 98721-427 Fax: +49 203 98721-111 markus.wingerath(a)lav.nrw.de<mailto:markus.wingerath@lav.nrw.de> www.lav.nrw.de<http://www.lav.nrw.de> ______________________________ -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://www.oxygenxml.com/pipermail/oxygen-user/attachments/20200114/43ad987…> ------------------------------ Message: 2 Date: Tue, 14 Jan 2020 16:20:58 +0200 From: "Oxygen XML Editor Support (Adrian Buza)" <support(a)oxygenxml.com> To: oxygen-user(a)oxygenxml.com, "Wingerath, Markus" <Markus.Wingerath(a)lav.nrw.de> Subject: Re: [oXygen-user] Installing oxygen 19.1 on centOS7 Message-ID: <85d3f4fe-1ff2-7863-164b-6a5a49560663(a)oxygenxml.com> Content-Type: text/plain; charset="windows-1252" Hello, > I’m running the install-script with su-privileges,I’m running the > install-script with su-privileges, but after drawing the first window > (for the language selection), there are no buttons or text. Have you tried running the installer and/or the application without su-privileges? > I tried using the “unattended installation” as well as unpacking the > tarball, both open a window but fail to draw it’s contents. The flash > screen also appears only as a grey rectangle. We have not tested Oxygen or the installer on CentOS 7, but the problem you are experiencing (empty windows) seems to be between Java and the X11 graphical system. Please check the version of Java being used, "java --version" I found an article about a similar problem with Intellij (also a Java app) on CentOS: https://intellij-support.jetbrains.com/hc/en-us/community/posts/36000043630… If you are working remotely (e.g. via XRDP), check if the framebuffer is configured to use 24-bit of color. Someone mentioned there that he resolved the problem in CentOS 7.6 by editing /etc/xrdp/xrdp.ini and changing max_bpp=24. If the problem persists, consider installing v21.1, OpenJDK distribution, "*Linux 64-bit (Includes OpenJDK 12.0.1)*"? https://www.oxygenxml.com/xml_editor/download_oxygenxml_editor.html?os=Linux Regards, Adrian Adrian Buza oXygen XML Editor and Author Support On 14.01.2020 14:19, Wingerath, Markus wrote: > > Dear list, > > > > I’m trying to install oxygen 19.1 on a VirtualMachine running centOS 7 > with GNOME via X11 and OpenJDK 1.8.0. > > I’m running the install-script with su-privileges, but after drawing > the first window (for the language selection), there are no buttons or > text. > > The functionality is there – I can open the drop-down menu – but no > text or buttons. > > > > I tried using the “unattended installation” as well as unpacking the > tarball, both open a window but fail to draw it’s contents. The flash > screen also appears only as a grey rectangle. > > > > The VM sits behind a firewall which blocks ftp-protocols and cannot be > altered, because we don’t administer it – this has led to problems in > the past, therefore it’s worth mentioning. > > > > I tried Google, but came up empty handed. I’m hoping someone here ran > into similar problems and has found a solution. > > > > Best wishes, > > M. Wingerath > > > > ______________________________ > > *Landesarchiv Nordrhein-Westfalen* > > Abteilung Rheinland > > Schifferstraße 30, 47059 Duisburg > > Tel.: +49 203 98721-427 > > Fax: +49 203 98721-111 > > markus.wingerath(a)lav.nrw.de <mailto:markus.wingerath@lav.nrw.de> > > www.lav.nrw.de <http://www.lav.nrw.de> > > ______________________________ > > > > > _______________________________________________ > oXygen-user mailing list > oXygen-user(a)oxygenxml.com > https://www.oxygenxml.com/mailman/listinfo/oxygen-user -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://www.oxygenxml.com/pipermail/oxygen-user/attachments/20200114/a201f71…> ------------------------------ Message: 3 Date: Tue, 14 Jan 2020 08:47:09 -0600 From: Eliot Kimber <ekimber(a)contrext.com> To: <oxygen-user(a)oxygenxml.com>, "Wingerath, Markus" <Markus.Wingerath(a)lav.nrw.de> Subject: Re: [oXygen-user] Installing oxygen 19.1 on centOS7 Message-ID: <D5890DA2-8A13-419D-915B-6DF51E676101(a)contrext.com> Content-Type: text/plain; charset="UTF-8" I had a similar issue on Redhat Enterprise 7 accessed via RDP from Windows. I found I had to add this line: xserverbpp=24 To the Xvnc and Xorg entries in xrdp.ini (/etc/xrdp/xrdp.ini) Cheers, E. -- Eliot Kimber http://contrext.com On 1/14/20, 8:20 AM, "oXygen-user on behalf of Oxygen XML Editor Support (Adrian Buza)" <oxygen-user-bounces(a)oxygenxml.com on behalf of support(a)oxygenxml.com> wrote: Hello, I’m running the install-script with su-privileges, I’m running the install-script with su-privileges, but after drawing the first window (for the language selection), there are no buttons or text. Have you tried running the installer and/or the application without su-privileges? I tried using the “unattended installation” as well as unpacking the tarball, both open a window but fail to draw it’s contents. The flash screen also appears only as a grey rectangle. We have not tested Oxygen or the installer on CentOS 7, but the problem you are experiencing (empty windows) seems to be between Java and the X11 graphical system. Please check the version of Java being used, "java --version" I found an article about a similar problem with Intellij (also a Java app) on CentOS: https://intellij-support.jetbrains.com/hc/en-us/community/posts/36000043630… If you are working remotely (e.g. via XRDP), check if the framebuffer is configured to use 24-bit of color. Someone mentioned there that he resolved the problem in CentOS 7.6 by editing /etc/xrdp/xrdp.ini and changing max_bpp=24. If the problem persists, consider installing v21.1, OpenJDK distribution, "Linux 64-bit (Includes OpenJDK 12.0.1)"? https://www.oxygenxml.com/xml_editor/download_oxygenxml_editor.html?os=Linux Regards, Adrian Adrian Buza oXygen XML Editor and Author Support On 14.01.2020 14:19, Wingerath, Markus wrote: Dear list, I’m trying to install oxygen 19.1 on a VirtualMachine running centOS 7 with GNOME via X11 and OpenJDK 1.8.0. I’m running the install-script with su-privileges, but after drawing the first window (for the language selection), there are no buttons or text. The functionality is there – I can open the drop-down menu – but no text or buttons. I tried using the “unattended installation” as well as unpacking the tarball, both open a window but fail to draw it’s contents. The flash screen also appears only as a grey rectangle. The VM sits behind a firewall which blocks ftp-protocols and cannot be altered, because we don’t administer it – this has led to problems in the past, therefore it’s worth mentioning. I tried Google, but came up empty handed. I’m hoping someone here ran into similar problems and has found a solution. Best wishes, M. Wingerath ______________________________ Landesarchiv Nordrhein-Westfalen Abteilung Rheinland Schifferstraße 30, 47059 Duisburg Tel.: +49 203 98721-427 Fax: +49 203 98721-111 markus.wingerath(a)lav.nrw.de www.lav.nrw.de <http://www.lav.nrw.de> ______________________________ _______________________________________________ oXygen-user mailing list oXygen-user@oxygenxml.comhttps://www.oxygenxml.com/mailman/listinfo/oxygen-user _______________________________________________ oXygen-user mailing list oXygen-user(a)oxygenxml.com https://www.oxygenxml.com/mailman/listinfo/oxygen-user ------------------------------ Subject: Digest Footer _______________________________________________ oXygen-user mailing list oXygen-user(a)oxygenxml.com https://www.oxygenxml.com/mailman/listinfo/oxygen-user ------------------------------ End of oXygen-user Digest, Vol 111, Issue 5 *******************************************

1 0

Installing oxygen 19.1 on centOS7
by Wingerath, Markus 14 Jan '20

14 Jan '20

Dear list, I'm trying to install oxygen 19.1 on a VirtualMachine running centOS 7 with GNOME via X11 and OpenJDK 1.8.0. I'm running the install-script with su-privileges, but after drawing the first window (for the language selection), there are no buttons or text. The functionality is there - I can open the drop-down menu - but no text or buttons. I tried using the "unattended installation" as well as unpacking the tarball, both open a window but fail to draw it's contents. The flash screen also appears only as a grey rectangle. The VM sits behind a firewall which blocks ftp-protocols and cannot be altered, because we don't administer it - this has led to problems in the past, therefore it's worth mentioning. I tried Google, but came up empty handed. I'm hoping someone here ran into similar problems and has found a solution. Best wishes, M. Wingerath ______________________________ Landesarchiv Nordrhein-Westfalen Abteilung Rheinland Schifferstraße 30, 47059 Duisburg Tel.: +49 203 98721-427 Fax: +49 203 98721-111 markus.wingerath(a)lav.nrw.de<mailto:markus.wingerath@lav.nrw.de> www.lav.nrw.de<http://www.lav.nrw.de> ______________________________

3 2

Why is the Syncro SVN Client deprecated?
by Tony Graham 09 Jan '20

09 Jan '20

See http://www.syncrosvnclient.com/. Why is the Syncro SVN Client being deprecated? I use Git for new projects, but I also work with existing projects that show no sign of moving off Subversion. I would be surprised if there are no other people in the same situation. Regards, Tony Graham. -- Senior Architect XML Division Antenna House, Inc. ---- Skerries, Ireland tgraham(a)antenna.co.jp

2 2

Git plug-in
by Kristen James Eberlein 09 Jan '20

09 Jan '20

I am evaluating the Git plug-in for oXygen XML Editor for a client that is having a hard time with SourceTree. For interested readers, see https://www.oxygenxml.com/doc/versions/21.1/ug-editor/topics/git-addon.html It installed easily and and I cloned a repository, but I cannot see a way to fetch branches from origin. The only branch I have access to is the one that I specified during the installation procedure. -- Best, Kris Kristen James Eberlein Chair, OASIS DITA Technical Committee Principal consultant, Eberlein Consulting www.eberleinconsulting.com +1 919 622-1501; kriseberlein (skype)

2 1

Request for changes in xquery indentation
by France Baril 06 Jan '20

06 Jan '20

Hi, At the last DITA Europe Conference, I discussed xquery indentation in Oxygen with Radu. As there are no universal rules, he proposed I send my suggestions. So here are some suggestions that would truly help me. If they don't get unanimous approval, I would suggest that some of them become configurable in preferences. I attached an xml file that is indented as I prefer (so please do open it without automatic indent). I included comments that indicate the proposed changes. When you apply indent you can experience the issues yourself. Thank you -- France Baril Architecte documentaire / Documentation architect france.baril(a)architextus.com

2 1

Re: [oXygen-user] oXygen-user Digest, Vol 110, Issue 15
by David Birnbaum 30 Dec '19

30 Dec '19

Thank you, Joe! Roy's work-around does what I need. Date: Sun, 29 Dec 2019 17:35:37 -0500 > From: Joe Wicentowski <joewiz(a)gmail.com> > To: oxygen-user(a)oxygenxml.com > Subject: Re: [oXygen-user] eXist-db in <oXygen/>? > Message-ID: > < > CAHwerk3DS0W5ZLU36v6dUQinCXJYrhUCVuc4+AJhtecD946VNQ(a)mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > Hi David, > > Let me quote from Adam Retter's response to a similar question on > exist-open[^1]: > > > The issue you have is that the Request object only makes sense when your > XQuery is run by eXist-db's webserver, this is because the "request" is the > incoming HTTP request. When running via oxygen there is no HTTP request. > > The same factor affects other utilities that talk to eXist via XML-RPC, > such as the Java Admin Client. makes sense, because the oXygen data source > connection that is responsible for executing eXist queries uses the XML-RPC > protocol. See the attached screenshot. > > In the same thread, Roy Walter suggested a workaround: using the > 3-parameter variant of the request:get-parameter function, in which the 3rd > parameter instructs the function whether to fail on error or not.[^2] If > you change your use of the function to: > > ``` > request:get-parameter('story', 'x', false()); > ``` > > ... then the function will return "x" when it otherwise would raise an > error. > > Best, > Joe > > [^1]: https://markmail.org/message/afds3uvbbouees7a > [^2]: https://markmail.org/message/offwjsqd46fcofqc\ >

1 0

eXist-db in <oXygen/>?
by David Birnbaum 29 Dec '19

29 Dec '19

Dear oxygen-user list, I've constructed an XQuery script for eXist-db that uses the function request:get-parameter(). It works as expected in eXide. I have established a data source connection between <oXygen/> (XML Editor 21.1, build 2019120214, running on MacOS Mojave) and eXist-db (5.0.0) running on localhost, and I can open, edit, and save XQuery scripts from inside eXist-db within <oXygen/>, from which I conclude that the connection is live. Since <oXygen/> apparently cannot use the eXist-db data source connection for debugging, instead of using the <oXygen/> XQuery debugger perspective to run the script I configured a transformation scenario where I specify the localhost eXist-db connection as the Transformer. When I run this script, I get the following error message from <oXygen/>: err:XPDY0002 Variable $request is not bound to an Java object The function is used in a line that reads: declare variable $story_id as xs:string := request:get-parameter('story', 'x'); I thought at first that the error might be because the "request:" namespace prefix was not declared and bound (eXist-db declares it implicitly), so I added an explicit namespace declaration for it: declare namespace request="http://exist-db.org/xquery/request"; The error remains. The entire XQuery script is below; it retrieves information from a TEI document, based on a user-supplied resource name, if the document exists and returns an error message otherwise. Can someone please help me identify what I have apparently misunderstood about running XQuery scripts in an <oXygen/> transformation scenario using eXist-db as the XQuery transformer? Sincerely, David djbpitt(a)gmail.com __ xquery version "3.1"; declare default element namespace "http://www.tei-c.org/ns/1.0"; declare namespace request="http://exist-db.org/xquery/request"; declare variable $stories as document-node()+ := collection('/db/apps/neh_06_reading_tei/xml'); declare variable $story_id as xs:string := request:get-parameter('story', 'x'); declare variable $story_filename as xs:string: = concat($story_id, '.xml'); declare variable $story as document-node()? := $stories[ends-with(base-uri(), $story_filename)]; if ($story) then <TEI>{ $story//(titleStmt/title | text) }</TEI> else <error xmlns="">{concat('No such story:', $story_id)}</error>

2 2