- oXygen-user - www.oxygenxml.com

RE: [oXygen-user] Some help please with interpreting error messages
by John.Hockaday＠ga.gov.au 17 Aug '04

17 Aug '04

Sorin, Thank you very much for replying to my email. The XSDs that you ask for are about 1MB so I have tarred and gzipped them into a file called ISO19139GML.tar.gz. I have loaded this file onto a test web site. The URL is: http://www-test.ga.gov.au/asdd/work/ISO19139GML.tar.gz If you can't access this file then I will send it directly to you rather than fill up everyone's mailbox on this list. The version of Oxygen that I am using is 3.1. I have asked for our systems administrators to load up version 4.2 and I expect that to happen within the next day or two. Maybe this will fix some of the validation errors. Thanks again for replying to my email. John > -----Original Message----- > From: Sorin Ristache [mailto:sorin@oxygenxml.com] > Sent: Monday, 16 August 2004 6:01 PM > To: Hockaday John > Cc: oXygen-user(a)oxygenxml.com > Subject: Re: [oXygen-user] Some help please with interpreting > error messages > > > Hello, > > Can you send your version of the files basicTypes.xsd, temporal.xsd, > gmlBase.xsd and xlinks.xsd and your complete XSD file that you are > trying to validate ? If I use the GML schema files from > http://schemas.opengis.net/ I get a completely different set of > validation errors. What <oXygen/> version are you using for > validation ? > > Best regards, > Sorin Ristache > > http://www.oxygenxml.com/ > Syncro Soft ltd. > > > John.Hockaday(a)ga.gov.au wrote: > > >Hi All, > > > >At the bottom of this email is an extract from an W3C XML > Schema file. When > >I try to validate this XSD I get the following error: > > > >"E src-resolve: Cannot resolve the name > 'gml:AbstractGeometryType' to a(n) > >'type definition' component." > > > >The line to which this errors refers is: > > > >" <xs:element name="TM_Object" type="gml:AbstractTimeObjectType"/>" > > > >I'm not quite sure what this error message means. I have > tried looking at > >the relevant W3C XML Schema documentation but it doesn't > make sense to me. I > >have looked at the temporal.xsd, which is the file referred > to by the "gml" > >namespace. The relevant code looks like this: > > > >" > > <complexType name="AbstractTimeObjectType" abstract="true"> > > <annotation> > > <documentation xml:lang="en"> > > The abstract supertype for temporal objects. > > </documentation> > > </annotation> > > <complexContent> > > <extension base="gml:AbstractGMLType"/> > > </complexContent> > > </complexType> > >" > > > >All I can think of is that the complexType name mentioned > above should be > >"gml:AbstractTimeObjectType" to make it relate to the "gml" > namespace. > > > >Can anyone tell me how I must change the code below to get > rid of the error? > > > >Thanks in advance for any help. > > > > > > > >John > > > > > ><?xml version="1.0" encoding="UTF-8"?> > ><xs:schema targetNamespace="http://www.isotc211.org/stXML" > >xmlns:stXML="http://www.isotc211.org/stXML" > >xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" > >xmlns:xs="http://www.w3.org/2001/XMLSchema" > >xmlns:xlink="http://www.w3.org/1999/xlink" > >xmlns:scXML="http://www.isotc211.org/scXML" > >xmlns:gml="http://www.opengis.net/gml" version="0.1"> > >  > > <xs:import namespace="http://www.opengis.net/gml" > >schemaLocation="../../GML3.1/GML-3.1.0-Draft-Schemas/base/tem > poral.xsd"/> > > <xs:import namespace="http://www.isotc211.org/scXML" > >schemaLocation="basicTypes.xsd"/> > >  > >  > > <xs:element name="TM_Primitive" > type="gml:AbstractTimePrimitiveType" > >substitutionGroup="stXML:TM_Object"/> > >  > > <xs:complexType name="TM_Primitive_PropertyType"> > > <xs:sequence> > > <xs:element ref="gml:_TimePrimitive" minOccurs="0"/> > > </xs:sequence> > > <xs:attributeGroup ref="scXML:ObjectReference"/> > > </xs:complexType> > >  > >  > > <xs:element name="TM_Object" type="gml:AbstractTimeObjectType"/> > >  > > <xs:complexType name="TM_Object_PropertyType"> > > <xs:sequence> > > <xs:element ref="gml:_TimeObject" minOccurs="0"/> > > </xs:sequence> > > <xs:attributeGroup ref="scXML:ObjectReference"/> > > </xs:complexType> > > > > > >_______________________________________________ > >oXygen-user mailing list > >oXygen-user(a)oxygenxml.com > >http://www.oxygenxml.com/mailman/listinfo/oxygen-user > > > > >

2 1

attrib polulation on DTDless document
by Sean Wheller 17 Aug '04

17 Aug '04

I notice when the DocDecl is commented that the docbook xref element is inserted as <xref></xref> instead of <xref/> Then I notice when inserting an attribute the inline completion mode is auto populated with the values of all other attributes of that type in the current document. This is a great feature, I never saw it before, it save soooo much time. Now why does it not work when the DocDecl is uncommented? -- Sean Wheller sean(a)enbaya.co.za http://www.enbaya.co.za

2 4

plug-in
by Sean Wheller 17 Aug '04

17 Aug '04

I wish to configure jsvn as a plugin to oxygen, is it possible. I created plugin.xml valid to plugin.dtd but am not sure how to complete it so it will work. <!DOCTYPE plugin SYSTEM "../plugin.dtd"> <plugin name="JSVN" description="Java Swing Interface to Subversion (SVN client required)" version="0.8" vendor="Alternate Computing Solutions" class="???????"> <runtime> <library name="jsvn-0.8.jar"/> </runtime> <extension type="?????" class="????"/> </plugin> -- Sean Wheller sean(a)enbaya.co.za http://www.enbaya.co.za

3 3

[Feature Request] code formatting
by T Reaves 17 Aug '04

17 Aug '04

I'd like to have a little more control over what happens when the XML is formatted. Are there any plans to add this? For example, I'd like to have a blank line before any comments. Comments typically start a logical block, and having that line there helps to graphically define it.

2 3

Some help please with interpreting error messages
by John.Hockaday＠ga.gov.au 16 Aug '04

16 Aug '04

Hi All, At the bottom of this email is an extract from an W3C XML Schema file. When I try to validate this XSD I get the following error: "E src-resolve: Cannot resolve the name 'gml:AbstractGeometryType' to a(n) 'type definition' component." The line to which this errors refers is: " <xs:element name="TM_Object" type="gml:AbstractTimeObjectType"/>" I'm not quite sure what this error message means. I have tried looking at the relevant W3C XML Schema documentation but it doesn't make sense to me. I have looked at the temporal.xsd, which is the file referred to by the "gml" namespace. The relevant code looks like this: " <complexType name="AbstractTimeObjectType" abstract="true"> <annotation> <documentation xml:lang="en"> The abstract supertype for temporal objects. </documentation> </annotation> <complexContent> <extension base="gml:AbstractGMLType"/> </complexContent> </complexType> " All I can think of is that the complexType name mentioned above should be "gml:AbstractTimeObjectType" to make it relate to the "gml" namespace. Can anyone tell me how I must change the code below to get rid of the error? Thanks in advance for any help. John <?xml version="1.0" encoding="UTF-8"?> <xs:schema targetNamespace="http://www.isotc211.org/stXML" xmlns:stXML="http://www.isotc211.org/stXML" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:scXML="http://www.isotc211.org/scXML" xmlns:gml="http://www.opengis.net/gml" version="0.1">  <xs:import namespace="http://www.opengis.net/gml" schemaLocation="../../GML3.1/GML-3.1.0-Draft-Schemas/base/temporal.xsd"/> <xs:import namespace="http://www.isotc211.org/scXML" schemaLocation="basicTypes.xsd"/>   <xs:element name="TM_Primitive" type="gml:AbstractTimePrimitiveType" substitutionGroup="stXML:TM_Object"/>  <xs:complexType name="TM_Primitive_PropertyType"> <xs:sequence> <xs:element ref="gml:_TimePrimitive" minOccurs="0"/> </xs:sequence> <xs:attributeGroup ref="scXML:ObjectReference"/> </xs:complexType>   <xs:element name="TM_Object" type="gml:AbstractTimeObjectType"/>  <xs:complexType name="TM_Object_PropertyType"> <xs:sequence> <xs:element ref="gml:_TimeObject" minOccurs="0"/> </xs:sequence> <xs:attributeGroup ref="scXML:ObjectReference"/> </xs:complexType>

2 1

Eclipse & color
by T Reaves 16 Aug '04

16 Aug '04

I can not seem to figure out how to not have the current line highlighted. Would someone point out what I need to do to turn this off? Thanks!

2 1

RE: [oXygen-user] Can't find xlinks when validating a document
by John.Hockaday＠ga.gov.au 12 Aug '04

12 Aug '04

Sorin, Thanks for that information but now I am really confused. While I was waiting for a reply on this list I did manage to find a copy of xlinks.xsd with a GML3.1 specification. The trouble is I don't know which one is the latest version. The application information held in the xlinks.xsd that you suggested is as follows: <annotation> <appinfo>xlinks.xsd v2.1.2 2002-07</appinfo> <documentation xml:lang="en">This schema provides the XLink attributes for general use.</documentation> </annotation> The application information held in the xlinks.xsd that I found is as follows: <annotation> <appinfo source="urn:opengis:specification:gml:schema-xlinks:v3.0c2">xlinks.xsd v3.0b2 2001-07</appinfo> <documentation> GML 3.0 candidate xlinks schema. Copyright (c) 2001 OGC, All Rights Reserved. </documentation> </annotation> It seems to me that the one that I found is a latter edition "v3.0b2" as opposed to "v2.1.2" but it's date, "2001-07" is earlier than the version that you suggested, "2002-07". I now wonder which one I should be using.? John > -----Original Message----- > From: Sorin Ristache [mailto:sorin@sync.ro] > Sent: Wednesday, 11 August 2004 5:00 PM > To: Hockaday John > Cc: oXygen-user(a)oxygenxml.com > Subject: Re: [oXygen-user] Can't find xlinks when validating > a document > > > The schema was developed by the OpenGIS Consortium: > > http://schemas.opengis.net/gml/2.1.2/xlinks.xsd > > Regards, > Sorin > > > John.Hockaday(a)ga.gov.au wrote: > > > Hi, > > > > I am trying to validate an xml record in which there are > lots of "import" > > statements and "include" statements to various W3C XML > Schemas. One of the > > XML Schemas is xlinks.xsd. The namespace is > http://www.w3.org/1999/xlink but > > I can't seem to find the actual xlinks.xsd from this URI. > > > > Does anyone know where xlinks.xsd is? > > > > Thanks. > > > > > > John Hockaday > > Geoscience Australia > > GPO Box 378 > > Canberra ACT 2601 > > (02) 6249 9735 > > http://www.ga.gov.au/ > > john.hockaday(a)ga.gov.au > > > > _______________________________________________ > > oXygen-user mailing list > > oXygen-user(a)oxygenxml.com > > http://www.oxygenxml.com/mailman/listinfo/oxygen-user >

2 1

Can't find xlinks when validating a document
by John.Hockaday＠ga.gov.au 11 Aug '04

11 Aug '04

Hi, I am trying to validate an xml record in which there are lots of "import" statements and "include" statements to various W3C XML Schemas. One of the XML Schemas is xlinks.xsd. The namespace is http://www.w3.org/1999/xlink but I can't seem to find the actual xlinks.xsd from this URI. Does anyone know where xlinks.xsd is? Thanks. John Hockaday Geoscience Australia GPO Box 378 Canberra ACT 2601 (02) 6249 9735 http://www.ga.gov.au/ john.hockaday(a)ga.gov.au

2 1

No line number in status bar
by Perez Carmona, David 06 Aug '04

06 Aug '04

Hi all, I've realized that no line number nor column number appear in the status bar. I think it must be very easy to do so, and useful. David ************************************************************* Este correo ha sido procesado por el antivirus del Grupo FCC. *************************************************************

2 1

No completion for exclude-result-prefixes
by Perez Carmona, David 06 Aug '04

06 Aug '04

Hi all, While editing an XSLT sheet, I don't get code assist for xsl:stylesheet/@exclude-result-prefixes Is this a bug? David ************************************************************* Este correo ha sido procesado por el Antivirus del Grupo FCC *************************************************************

2 1